The Kiibohd Controller
----------------------
-TODO, write some insightful/informative :P
+This README is a bit long, just look at the sections you are interested in.
+You only need to install avr-gcc if you want to build for the Teensy 2.0/2.0++.
+Everything else needs an arm-none-eabi-gcc compiler (e.g. Infinity keyboard, Teensy 3.0/3.1, McHCK).
+
+
+Linux is the ideal build environment (preferably recent'ish).
+In the near future I'll make available an Arch Linux VM for building/manufacturing tests.
+
+
+Building on Mac should be ok for 99% of users with Macports (haven't tried Brew).
+The dfu Bootloader will not build correctly with the old version of arm-none-eabi-gcc that Macports currently has (4.7.3).
+This is due to a bug with lto (link time optimizations) which makes the resulting binary too big to fit on the chip (must be less than 4096 Bytes).
+
+
+Building on Windows should also be fine for 99% of users, but takes a bunch of work to setup (because Windows is a crappy dev environment).
+Cygwin is currently required along with some non-Cygwin compilers and utilities (because they are not available for Cygwin).
+The dfu Bootloader will not build because of a Make 3.81+ bug/feature that removed support for non-Unix (Windows) filenames as dependencies of targets.
+If you replace the version of Make in Cygwin it should work (e.g. http://stackoverflow.com/questions/601516/cygwin-make-error-target-pattern-contains-no).
+However, make sure that the flash size is no larger than 4096 Bytes or the bootloader will not work.
+Things will likely break if there are *SPACES IN YOUR PATHS*. I install cygwin to C:\cygwin64.
+If you are brave and have programming knowledge, I will accept patches to fix any issues regarding spaces in paths.
+
Please give authors credit for modules used if you use in a distributed product :D
----------------------
-Dependencies
+General Dependencies
----------------------
Below listed are the Arch Linux pacman names, AUR packages may be required.
These depend a bit on which targets you are trying to build, but the general one:
- cmake (2.8 and higher)
-- Teensy Loader (http://pjrc.com/teensy/loader.html)
+- git
+- ctags (recommended, not required)
+- python3
+- libusb1.0 (and -devel)
+- make
AVR Specific (Teensy 1.0/++,2.0/++) (try to use something recent, suggested versions below)
-- avr-gcc (4.8.0)
-- avr-binutils (2.23.2)
-- avr-libc (1.8.0)
+- avr-gcc (~4.8.0)
+- avr-binutils (~2.23.2)
+- avr-libc (~1.8.0)
+
+
+ARM Specific (Teensy 3.0/3.1, Infinity Keyboard, McHCK)
+Arch Linux / Mac Ports
+- arm-none-eabi-gcc
+- arm-none-eaby-binutils
-ARM Specific (Teensy 3.0) (Sourcery CodeBench Lite for ARM EABI
-(http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/)
-- arm-none-eabi
-- TODO?
+Windows
+(https://launchpad.net/gcc-arm-embedded/+download)
+- gcc-arm-none-eabi (win32.zip)
----------------------
-Selecting Architecture
+Windows Setup
----------------------
-This is where you choose which architecture you want to build for.
-The options are:
- - Teensy 1.0 (Not tested)
- - Teensy 1.0++ (Not tested)
- - Teensy 2.0
- - Teensy 2.0++
- - Teensy 3.0
+Compiling on Windows does work, just it's a bunch more work.
+
+First make sure Cygwin is installed - http://www.cygwin.com/ - 32bit or 64bit is fine. Make sure the following are installed:
+- make
+- git (needed for some compilation info)
+- cmake
+- gcc-core
+- gcc-g++
+- libusb1.0
+- libusb1.0-devel
+- python3
+- ctags (recommended, not required)
+
+Please note, I use cygwin term exclusively for any command line options. Unless mentioned otherwise, use it.
+Do NOT use CMD or Powershell.
+
+Also install the Windows version of CMake (3+ is ideal) - http://cmake.org/cmake/resources/software.html
+Select "Do not add CMake to system PATH".
+This is in addition to the Cygwin version. This is an easier alternative to installing another C compiler.
+Add the following line to your .bashrc, making sure the CMake path is correct:
+ echo "alias wincmake=\"PATH='/cygdrive/c/Program Files (x86)/CMake'/bin:'${PATH}' cmake -G 'Unix Makefiles'\"" >> ~/.bashrc
+
+Install the PJRC Virtual Serial Port Driver:
+(http://pjrc.com/teensy/serial_install.exe)
+
+Next, install the compiler(s) you want.
-Open up CMakeLists.txt in your favourite text editor.
-You are looking for:
- ###
- Compiler Family
- #
- #| Specify the compiler family to use
- #| Currently only supports AVR and ARM
- #| "avr" # Teensy 1.0
- #| "avr" # Teensy 2.0
- #| "avr" # Teensy++ 1.0
- #| "avr" # Teensy++ 2.0
- #| "arm" # Teensy 3.0
+ ---------
+| AVR GCC |
+ ---------
- set( COMPILER_FAMILY "avr" )
+You just need the Atmel AVR 8-bit Toolchain. The latest should be fine, as of writing it was 3.4.3.
+http://www.atmel.com/tools/atmelavrtoolchainforwindows.aspx
+(Atmel AVR 8-bit Toolchain 3.4.3 - Windows)
-Just change the COMPILER_FAMILY variable to whatever you are trying to build for.
+Extract the files to a directory, say C:\avr8-gnu-toolchain. Then copy all the folders in that directory to the Cygwin /usr/local directory.
+Mine is C:\cygwin64\usr\local.
+(You can also just setup the paths, but this is faster/simpler. Might screw up your Cygwin though).
-NOTE: If you change this option, you will *may* to delete the build directory that is created in the Building sections below.
+
+ ----------
+| ARM EABI |
+ ----------
+
+Download the latest GNU Tools for Embedded Processors gcc-arm-none-eabi.
+
+https://launchpad.net/gcc-arm-embedded/+download
+
+Download "gcc-arm-none-eabi*win32.zip".
+
+Then extract all the folders/files in the zip to the Cygwin /usr/local directory.
+Mine is C:\cygwin64\usr\local.
+Or, you can setup paths using the installer (you have to be more careful, avoid spaces in paths).
----------------------
-Selecting Microcontroller
+CMake Info
----------------------
-Even if you selected the "avr" family of microcontroller architectures, you will still need to specify a target microcontroller (or once more ARM microcontrollers are supported).
+One of the big benefits of using CMake is the ability to build multiple configurations (for different microcontrollers) at the same time.
+The following sections explain in detail what each CMakeLists.txt configuration option does and what you can change it to.
+However, it is possible to configure each of these options using the -D command line flag.
-Open up avr.cmake (or arm.cmake) in your favourite text editor.
-You are looking for:
+For example, to build the Infinity Keyboard default configuration:
- ###
- # Atmel Defines and Linker Options
- #
+mkdir build_infinity
+cd build_infinity
+cmake -DCHIP=mk20dx128vlf5 -DScanModule=MD1 -DMacroModule=PartialMap -DOutputModule=pjrcUSB -DDebugModule=full -DBaseMap=defaultMap -DDefaultMap="md1Overlay stdFuncMap" -DPartialMaps="hhkbpro2" ..
+make
- #| MCU Name
- #| You _MUST_ set this to match the board you are using
- #| type "make clean" after changing this, so all files will be rebuilt
- #|
- #| "at90usb162" # Teensy 1.0
- #| "atmega32u4" # Teensy 2.0
- #| "at90usb646" # Teensy++ 1.0
- #| "at90usb1286" # Teensy++ 2.0
+CMake defaults to the values specified in CMakeLists.txt if not overridden via the command line.
+NOTE: On Windows, you will have to use "wincmake" instead of "cmake".
- set( MCU "at90usb1286" )
-*OR*
- ###
- # ARM Defines and Linker Options
- #
+----------------------
+Selecting Microcontroller
+----------------------
- #| Chip Name (Linker)
- #| You _MUST_ set this to match the board you are using
- #| type "make clean" after changing this, so all files will be rebuilt
- #|
- #| "mk20dx128" # Teensy 3.0
+This is where you select the chip you want to compile for.
+The build system will automatically select the compiler needed to compile for your chip.
- set( CHIP "mk20dx128" )
+Open up CMakeLists.txt in your favourite text editor.
+You are looking for:
+ ###
+ # Chip Selection
+ #
-Just change the CHIP variable to the microcontroller you are trying to build for.
+ #| You _MUST_ set this to match the microcontroller you are trying to compile for
+ #| You _MUST_ clean the build directory if you change this value
+ #|
+ set( CHIP
+ # "at90usb162" # Teensy 1.0 (avr)
+ # "atmega32u4" # Teensy 2.0 (avr)
+ # "at90usb646" # Teensy++ 1.0 (avr)
+ # "at90usb1286" # Teensy++ 2.0 (avr)
+ # "mk20dx128" # Teensy 3.0 (arm)
+ "mk20dx128vlf5" # McHCK mk20dx128vlf5
+ # "mk20dx256" # Teensy 3.1 (arm)
+ CACHE STRING "Microcontroller Chip" )
+
+Just uncomment the chip you want, and comment out the old one.
NOTE: If you change this option, you will *need* to delete the build directory that is created in the Building sections below.
- Scan Module
- Macro Module
-- USB Module
+- Output Module
- Debug Module
The Scan Module is where the most interesting stuff happens. These modules take in "keypress data".
Some scan modules have very specialized hardware requirements, each module directory should have at least a link to the needed parts and/or schematics (TODO!).
-The Macro Module takes care of the mapping of the key press/release code into a USB scan code.
+The Macro Module takes care of the mapping of the key press/release code into an Output (USB) scan code.
Any layering, macros, keypress intelligence/reaction is done here.
-The USB Module is the output module of the microcontroller. Currently USB is the only output protocol.
+The Output Module is the module dealing with output from the microcontroller. Currently USB is the only output protocol.
Different USB output implementations are available, pjrc being the safest/least featureful one.
Debug capabilities may depend on the module selected.
-Open up setup.cmake in your favourite text editor.
+Open up CMakeLists.txt in your favourite text editor.
Look for:
###
#| All of the modules must be specified, as they generate the sources list of files to compile
#| Any modifications to this file will cause a complete rebuild of the project
- #| Please look at the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
+ #| Please look at the {Scan,Macro,Output,Debug} for information on the modules and how to create new ones
##| Deals with acquiring the keypress information and turning it into a key index
- set( ScanModule "avr-capsense" )
+ set( ScanModule "MD1"
+ CACHE STRING "Scan Module" )
- ##| Uses the key index and potentially applies special conditions to it, mapping it to a usb key code
- set( MacroModule "buffer" )
+ ##| Provides the mapping functions for DefaultMap and handles any macro processing before sending to the OutputModule
+ set( MacroModule "PartialMap"
+ CACHE STRING "Macro Module" )
##| Sends the current list of usb key codes through USB HID
- set( USBModule "pjrc" )
+ set( OutputModule "pjrcUSB"
+ CACHE STRING "Output Module" )
##| Debugging source to use, each module has it's own set of defines that it sets
- set( DebugModule "full" )
+ set( DebugModule "full"
+ CACHE STRING "Debug Module" )
Look at each module individually for it's requirements. There is chip/architecture dependency checking but some permutations of modules may not be tested/compile.
Example output:
- [master]: cmake .. [...sy/avr-capsense-haata/build](hyatt@901Mas:pts/4)
+ [master]: cmake .. [~/Source/controller/build](hyatt@x230mas:pts/6)
-- Compiler Family:
- avr
- -- MCU Selected:
- at90usb1286
+ arm
+ -- Chip Selected:
+ mk20dx128vlf5
+ -- Chip Family:
+ mk20dx
+ -- CPU Selected:
+ cortex-m4
+ -- Compiler Source Files:
+ Lib/mk20dx.c;Lib/delay.c
+ -- Bootloader Type:
+ dfu
-- Detected Scan Module Source Files:
- Scan/avr-capsense/scan_loop.c
+ Scan/MD1/scan_loop.c;Scan/MD1/../MatrixARM/matrix_scan.c
-- Detected Macro Module Source Files:
- Macro/buffer/macro.c
- -- Detected USB Module Source Files:
- USB/pjrc/usb_com.c;USB/pjrc/avr/usb_keyboard_debug.c
+ Macro/PartialMap/macro.c
+ -- Detected Output Module Source Files:
+ Output/pjrcUSB/output_com.c;Output/pjrcUSB/arm/usb_desc.c;Output/pjrcUSB/arm/usb_dev.c;
+ Output/pjrcUSB/arm/usb_keyboard.c;Output/pjrcUSB/arm/usb_mem.c;Output/pjrcUSB/arm/usb_serial.c
-- Detected Debug Module Source Files:
- Debug/full/../led/led.c;Debug/full/../print/print.c
+ Debug/full/../cli/cli.c;Debug/full/../led/led.c;Debug/full/../print/print.c
+ -- Found Git: /usr/bin/git (found version "2.2.1")
+ -- Found Ctags: /usr/bin/ctags (found version "5.8")
+ -- Checking for latest kll version:
+ Current branch master is up to date.
+ -- Detected Layout Files:
+ /home/hyatt/Source/controller/Macro/PartialMap/capabilities.kll
+ /home/hyatt/Source/controller/Output/pjrcUSB/capabilities.kll
+ /home/hyatt/Source/controller/Scan/MD1/defaultMap.kll
+ /home/hyatt/Source/controller/kll/layouts/md1Overlay.kll
+ /home/hyatt/Source/controller/kll/layouts/stdFuncMap.kll
+ /home/hyatt/Source/controller/kll/layouts/hhkbpro2.kll
-- Configuring done
-- Generating done
- -- Build files have been written to: /home/hyatt/Source/Teensy/avr-capsense-haata/build
- [master]: make [...sy/avr-capsense-haata/build](hyatt@901Mas:pts/4)
+ -- Build files have been written to: /home/hyatt/Source/controller/build
+ [master]: make [~/Source/controller/build](hyatt@x230mas:pts/6)
+ [ 5%] Generating KLL Layout
Scanning dependencies of target kiibohd.elf
- [ 12%] Building C object CMakeFiles/kiibohd.elf.dir/main.c.o
- [ 25%] Building C object CMakeFiles/kiibohd.elf.dir/Scan/avr-capsense/scan_loop.c.o
- [ 37%] Building C object CMakeFiles/kiibohd.elf.dir/Macro/buffer/macro.c.o
- [ 50%] Building C object CMakeFiles/kiibohd.elf.dir/USB/pjrc/usb_com.c.o
- [ 62%] Building C object CMakeFiles/kiibohd.elf.dir/USB/pjrc/avr/usb_keyboard_debug.c.o
- [ 75%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/led/led.c.o
- [ 87%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/print/print.c.o
+ [ 11%] Building C object CMakeFiles/kiibohd.elf.dir/main.c.o
+ [ 17%] Building C object CMakeFiles/kiibohd.elf.dir/Lib/mk20dx.c.o
+ [ 23%] Building C object CMakeFiles/kiibohd.elf.dir/Lib/delay.c.o
+ [ 29%] Building C object CMakeFiles/kiibohd.elf.dir/Scan/MD1/scan_loop.c.o
+ [ 35%] Building C object CMakeFiles/kiibohd.elf.dir/Scan/MatrixARM/matrix_scan.c.o
+ [ 41%] Building C object CMakeFiles/kiibohd.elf.dir/Macro/PartialMap/macro.c.o
+ [ 47%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/output_com.c.o
+ [ 52%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_desc.c.o
+ [ 58%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_dev.c.o
+ [ 64%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_keyboard.c.o
+ [ 70%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_mem.c.o
+ [ 76%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_serial.c.o
+ [ 82%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/cli/cli.c.o
+ [ 88%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/led/led.c.o
+ [ 94%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/print/print.c.o
Linking C executable kiibohd.elf
- Creating load file for Flash: kiibohd.hex
- Creating Extended Listing: kiibohd.lss
- Creating Symbol Table: kiibohd.sym
- [ 87%] Built target kiibohd.elf
+ [ 94%] Built target kiibohd.elf
Scanning dependencies of target SizeAfter
- [100%] Size after generation:
- text data bss dec hex filename
- 0 6112 0 6112 17e0 kiibohd.hex
- 5792 320 852 6964 1b34 kiibohd.elf
+ [100%] Chip usage for mk20dx128vlf5
+ SRAM: 32% 5384/16384 bytes
+ Flash: 18% 23384/126976 bytes
[100%] Built target SizeAfter
Linux Loading Firmware
----------------------
+First place the keyboard into re-flash mode.
+This can be done either by pressing the re-flash button on the PCB/Teensy.
+Or by entering the Kiibohd Virtual Serial Port and using the 'reload' command.
+
The 'load' script that is created during the build can load the firmware over USB.
-It uses sudo, so make sure you have the priviledges.
+Either run it with sudo, or install the 98-kiibohd.rules to /etc/udev/rules.d
+ and run: udevadm control --reload-rules
+
-(TODO, not complete, avr and arm are different currently, need to be unified)
+To load the newly built firmware:
./load
+----------------------
+Linux Building Bootloader
+----------------------
+
+*NOTE* Does not apply to Teensy based builds.
+
+From this directory.
+cd Bootloader
+mkdir build
+cd build
+cmake ..
+make
+
+Example output:
+
+ [master]: cmake .. [~/Source/controller/Bootloader/build](hyatt@x230mas:pts/6)
+ -- Compiler Family:
+ arm
+ -- Chip Selected:
+ mk20dx128vlf5
+ -- Chip Family:
+ mk20dx
+ -- CPU Selected:
+ cortex-m4
+ -- Compiler Source Files:
+ Lib/mk20dx.c;Lib/delay.c
+ -- Bootloader Type:
+ dfu
+ -- Bootloader Source Files:
+ main.c;dfu.c;dfu.desc.c;flash.c;kinetis.c;usb.c
+ -- Found Git: /usr/bin/git (found version "2.2.1")
+ -- Found Ctags: /usr/bin/ctags (found version "5.8")
+ -- Configuring done
+ -- Generating done
+ -- Build files have been written to: /home/hyatt/Source/controller/Bootloader/build
+ [master]: make [~/Source/controller/Bootloader/build](hyatt@x230mas:pts/6)
+ Scanning dependencies of target kiibohd_bootloader.elf
+ [ 11%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/main.c.o
+ [ 22%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/dfu.c.o
+ [ 33%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/dfu.desc.c.o
+ [ 44%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/flash.c.o
+ [ 55%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/kinetis.c.o
+ [ 66%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/usb.c.o
+ [ 77%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/home/hyatt/Source/controller/Lib/mk20dx.c.o
+ [ 88%] Building C object CMakeFiles/kiibohd_bootloader.elf.dir/home/hyatt/Source/controller/Lib/delay.c.o
+ Linking C executable kiibohd_bootloader.elf
+ [ 88%] Built target kiibohd_bootloader.elf
+ Scanning dependencies of target SizeAfter
+ [100%] Chip usage for mk20dx128vlf5
+ SRAM: 19% 3176/16384 bytes
+ Flash: 2% 3736/126976 bytes
+ [100%] Built target SizeAfter
+
+
+
+----------------------
+Linux Loading Bootloader
+----------------------
+
+*NOTE* Does not apply to Teensy based builds.
+
+It's recommended to use an SWD-type flasher like a Bus Pirate.
+There is a convenience script for loading the firmware once the system is setup.
+
+cd Bootloader/Scripts
+./swdLoad.bash
+
+The above script requires Ruby, Ruby serial port module, git, and a /dev/buspirate udev rule.
+
+Additional Notes:
+https://github.com/mchck/mchck/wiki/Getting-Started (See Bus-Pirate section)
+https://wiki.archlinux.org/index.php/Bus_pirate
+
+
+
----------------------
Windows Building
----------------------
-TODO
+From this directory.
+mkdir build
+cd build
+wincmake ..
+make
+
+
+Example output:
+
+ $ wincmake ..
+ -- Compiler Family:
+ arm
+ -- Chip Selected:
+ mk20dx128vlf5
+ -- Chip Family:
+ mk20dx
+ -- CPU Selected:
+ cortex-m4
+ -- Compiler Source Files:
+ Lib/mk20dx.c;Lib/delay.c
+ -- Bootloader Type:
+ dfu
+ -- Detected Scan Module Source Files:
+ Scan/MD1/scan_loop.c;Scan/MD1/../MatrixARM/matrix_scan.c
+ -- Detected Macro Module Source Files:
+ Macro/PartialMap/macro.c
+ -- Detected Output Module Source Files:
+ Output/pjrcUSB/output_com.c;Output/pjrcUSB/arm/usb_desc.c;Output/pjrcUSB/arm/usb_dev.c;Output/pjrcUSB/arm/usb_keyboard.c;Output/pjrcUSB/arm/usb_mem.c;Output/pjrcUSB/arm/usb_serial.c
+ -- Detected Debug Module Source Files:
+ Debug/full/../cli/cli.c;Debug/full/../led/led.c;Debug/full/../print/print.c
+ -- Found Git: C:/cygwin64/bin/git.exe (found version "2.1.1")
+ -- Found Ctags: C:/cygwin64/bin/ctags.exe (found version "5.8")
+ -- Checking for latest kll version:
+ Current branch master is up to date.
+ -- Detected Layout Files:
+ C:/cygwin64/home/Jacob/controller/Macro/PartialMap/capabilities.kll
+ C:/cygwin64/home/Jacob/controller/Output/pjrcUSB/capabilities.kll
+ C:/cygwin64/home/Jacob/controller/Scan/MD1/defaultMap.kll
+ C:/cygwin64/home/Jacob/controller/kll/layouts/md1Overlay.kll
+ C:/cygwin64/home/Jacob/controller/kll/layouts/stdFuncMap.kll
+ C:/cygwin64/home/Jacob/controller/kll/layouts/hhkbpro2.kll
+ -- Configuring done
+ -- Generating done
+ -- Build files have been written to: C:/cygwin64/home/Jacob/controller/build
+
+ Jacob@DenPC ~/controller/build
+ $ make
+ [ 5%] Generating KLL Layout
+ Scanning dependencies of target kiibohd.elf
+ [ 11%] Building C object CMakeFiles/kiibohd.elf.dir/main.c.obj
+ [ 17%] Building C object CMakeFiles/kiibohd.elf.dir/Lib/mk20dx.c.obj
+ [ 23%] Building C object CMakeFiles/kiibohd.elf.dir/Lib/delay.c.obj
+ [ 29%] Building C object CMakeFiles/kiibohd.elf.dir/Scan/MD1/scan_loop.c.obj
+ [ 35%] Building C object CMakeFiles/kiibohd.elf.dir/Scan/MatrixARM/matrix_scan.c.obj
+ [ 41%] Building C object CMakeFiles/kiibohd.elf.dir/Macro/PartialMap/macro.c.obj
+ [ 47%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/output_com.c.obj
+ [ 52%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_desc.c.obj
+ [ 58%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_dev.c.obj
+ [ 64%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_keyboard.c.obj
+ [ 70%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_mem.c.obj
+ [ 76%] Building C object CMakeFiles/kiibohd.elf.dir/Output/pjrcUSB/arm/usb_serial.c.obj
+ [ 82%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/cli/cli.c.obj
+ [ 88%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/led/led.c.obj
+ [ 94%] Building C object CMakeFiles/kiibohd.elf.dir/Debug/print/print.c.obj
+ Linking C executable kiibohd.elf
+ [ 94%] Built target kiibohd.elf
+ Scanning dependencies of target SizeAfter
+ [100%] Chip usage for mk20dx128vlf5
+ SRAM: 32% 5384/16384 bytes
+ Flash: 18% 23296/126976 bytes
+ [100%] Built target SizeAfter
+
+
+NOTES:
+
+If you get the following error, you have not setup wincmake correctly:
+
+$ make
+[ 5%] Generating KLL Layout
+Scanning dependencies of target kiibohd.elf
+[ 11%] Building C object CMakeFiles/kiibohd.elf.dir/main.c.o
+../main.c:28:19: fatal error: macro.h: No such file or directory
+ #include <macro.h>
+ ^
+compilation terminated.
+CMakeFiles/kiibohd.elf.dir/build.make:67: recipe for target 'CMakeFiles/kiibohd.elf.dir/main.c.o' failed
+make[2]: *** [CMakeFiles/kiibohd.elf.dir/main.c.o] Error 1
+CMakeFiles/Makefile2:98: recipe for target 'CMakeFiles/kiibohd.elf.dir/all' failed
+make[1]: *** [CMakeFiles/kiibohd.elf.dir/all] Error 2
+Makefile:75: recipe for target 'all' failed
+make: *** [all] Error 2
+
+If you have already added the line to your ~/.bashrc try restarting your cygwin shell.
+
+
----------------------
Windows Loading Firmware
----------------------
-TODO
+First place the keyboard into re-flash mode.
+This can be done either by pressing the re-flash button on the PCB/Teensy.
+Or by entering the Kiibohd Virtual Serial Interface and using the 'reload' command.
+
+The 'load' script that is created during the build can load the firmware over USB.
+
+To load the newly built firmware:
+./load
+
+Be patient the couple of times, Windows is slow at installing drivers...
+
+
----------------------
Mac OS X Building
----------------------
+From this directory.
+mkdir build
+cd build
+cmake ..
+make
+
+
+Example output:
TODO
+
+
----------------------
Mac OS X Loading Firmware
----------------------
-TODO
+First place the keyboard into re-flash mode.
+This can be done either by pressing the re-flash button on the PCB/Teensy.
+Or by entering the Kiibohd Virtual Serial Port and using the 'reload' command.
+
+The 'load' script that is created during the build can load the firmware over USB.
+
+
+To load the newly built firmware:
+./load
----------------------
-Debugging
+Virtual Serial Port - CLI
----------------------
-TODO
+Rather than use a special program that can interpret Raw HID, this controller exposes a USB Serial CDC endpoint.
+This allows for you to use a generic serial terminal to debug/control the keyboard firmware (e.g. Tera Term, minicom, screen)
+
+
+ -------
+| Linux |
+ -------
+
+I generally use screen.
+You will need sudo/root priviledges if you haven't installed the 98-kiibohd.rules file to /etc/udev/rules.d
+
+screen /dev/ttyACM0
+(Might be ACM1, ACM2, etc.)
+
+
+ ---------
+| Windows |
+ ---------
+
+Make sure the Teensy Virtual Serial Port driver is installed.
+If possible use screen (as part of Cygwin).
+Check which COM port the virtual serial port has been assigned to:
+ Device Manager->Ports (COM & LPT)->Teensy USB Serial
+ In brackets it will say which COM port (e.g. COM3)
+
+
+putty works well when using DTR/DSR or RTS/CTS flow control.
+Connection type: Serial
+Serial line: <Your COM port, e.g. COM3>
+Speed: (doesn't matter, it's auto-negotiated)
+
+Under Category->Connections->Serial
+Flow control: DTR/DSR
+
+If stuff is hard to read (you have a dumb colour scheme):
+Category->Window->Colours->Use system colur
+That seems to make text at least readable (I use a custom colour scheme that makes each colour easy to see -HaaTa).
+
+
+Unfortunately, screen for Cygwin seems to be broken for serial ports, but you can try it...
+screen /dev/ttyS2
+(Might be a different file, ttyS0, ttyACM0, ttyUSB0, etc.)
+
+Gnu screen doesn't seem to echo all the characters (it works though).
+I believe it's a problem with stty, but I don't know how to fix it...
+
+
+ ----------
+| Mac OS X |
+ ----------
+I recommend screen (can be installed via Macports).
+screen /dev/tty.<usb something>