Adding initial dfu-upload code and debugging for Bootloader.

[kiibohd-controller.git] / Output / uartOut / arm / uart_serial.c

diff --git a/Output/uartOut/arm/uart_serial.c b/Output/uartOut/arm/uart_serial.c
index e92bbd1fc4b564d89c48da640f0e8c3d087fd74d..d0ae0dfb10ad647fcb1df56215f1a45c0f42bdc9 100644 (file)
--- a/Output/uartOut/arm/uart_serial.c
+++ b/Output/uartOut/arm/uart_serial.c
@@ -192,14 +192,14 @@ void uart_serial_setup()
 #elif defined(_mk20dx256vlh7_) // UART2 Debug
        // Setup baud rate - 115200 Baud
        // Uses Bus Clock
-       // 24 MHz / ( 16 * Baud ) = BDH/L
-       // Baud: 115200 -> 24 MHz / ( 16 * 115200 ) = 13.021
-       // Thus baud setting = 13
+       // 36 MHz / ( 16 * Baud ) = BDH/L
+       // Baud: 115200 -> 36 MHz / ( 16 * 115200 ) = 19.53125
+       // Thus baud setting = 19
        // NOTE: If finer baud adjustment is needed see UARTx_C4 -> BRFA in the datasheet
-       uint16_t baud = 13; // Max setting of 8191
+       uint16_t baud = 19; // Max setting of 8191
        UART_BDH = (uint8_t)(baud >> 8);
        UART_BDL = (uint8_t)baud;
-       UART_C4 = 0x01;
+       UART_C4 = 0x11;
 
 #endif