// Project Includes
#include <Lib/OutputLib.h>
#include <Lib/Interrupts.h>
+#include <print.h>
+#include <kll_defs.h>
// Local Includes
#include "uart_serial.h"
void uart_device_reload()
{
+ if ( flashModeEnabled_define == 0 )
+ {
+ print( NL );
+ warn_print("flashModeEnabled not set, cancelling firmware reload...");
+ info_msg("Set flashModeEnabled to 1 in your kll configuration.");
+ return;
+ }
+
+// MCHCK
+#if defined(_mk20dx128vlf5_)
+
+ // MCHCK Kiibohd Variant
+ // Check to see if PTA3 (has a pull-up) is connected to GND (usually via jumper)
+ // Only allow reload if the jumper is present (security)
+ GPIOA_PDDR &= ~(1<<3); // Input
+ PORTA_PCR3 = PORT_PCR_PFE | PORT_PCR_MUX(1); // Internal pull-up
+
+ // Check for jumper
+ if ( GPIOA_PDIR & (1<<3) && flashModeEnabled_define != 0 )
+ {
+ print( NL );
+ warn_print("Security jumper not present, cancelling firmware reload...");
+ info_msg("Replace jumper on middle 2 pins, or manually press the firmware reload button.");
+ }
+ else
+ {
+ // Copies variable into the VBAT register, must be identical to the variable in the bootloader to jump to the bootloader flash mode
+ for ( int pos = 0; pos < sizeof(sys_reset_to_loader_magic); pos++ )
+ (&VBAT)[ pos ] = sys_reset_to_loader_magic[ pos ];
+ SOFTWARE_RESET();
+ }
+
+// Kiibohd mk20dx256vlh7
+#elif defined(_mk20dx256vlh7_)
+ // Copies variable into the VBAT register, must be identical to the variable in the bootloader to jump to the bootloader flash mode
+ for ( int pos = 0; pos < sizeof(sys_reset_to_loader_magic); pos++ )
+ (&VBAT)[ pos ] = sys_reset_to_loader_magic[ pos ];
+ SOFTWARE_RESET();
+
+// Teensy 3.0 and 3.1
+#else
asm volatile("bkpt");
+#endif
}