Adding initial dfu-upload code and debugging for Bootloader.

[kiibohd-controller.git] / Output / pjrcUSB / output_com.c

diff --git a/Output/pjrcUSB/output_com.c b/Output/pjrcUSB/output_com.c
index eb25b83ba30e65a5975922c4ca705b248b553dac..7a9b84b7b2f0454e5e7c83c8ea191aceabdea2e2 100644 (file)
--- a/Output/pjrcUSB/output_com.c
+++ b/Output/pjrcUSB/output_com.c
@@ -93,20 +93,20 @@ CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
 // Which modifier keys are currently pressed
 // 1=left ctrl,    2=left shift,   4=left alt,    8=left gui
 // 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
-         uint8_t  USBKeys_Modifiers    = 0;
-         uint8_t  USBKeys_ModifiersCLI = 0; // Separate CLI send buffer
+       uint8_t  USBKeys_Modifiers    = 0;
+       uint8_t  USBKeys_ModifiersCLI = 0; // Separate CLI send buffer
 
 // Currently pressed keys, max is defined by USB_MAX_KEY_SEND
-         uint8_t  USBKeys_Keys   [USB_NKRO_BITFIELD_SIZE_KEYS];
-         uint8_t  USBKeys_KeysCLI[USB_NKRO_BITFIELD_SIZE_KEYS]; // Separate CLI send buffer
+       uint8_t  USBKeys_Keys   [USB_NKRO_BITFIELD_SIZE_KEYS];
+       uint8_t  USBKeys_KeysCLI[USB_NKRO_BITFIELD_SIZE_KEYS]; // Separate CLI send buffer
 
 // System Control and Consumer Control 1KRO containers
-         uint8_t  USBKeys_SysCtrl;
-         uint16_t USBKeys_ConsCtrl;
+       uint8_t  USBKeys_SysCtrl;
+       uint16_t USBKeys_ConsCtrl;
 
 // The number of keys sent to the usb in the array
-         uint8_t  USBKeys_Sent    = 0;
-         uint8_t  USBKeys_SentCLI = 0;
+       uint8_t  USBKeys_Sent    = 0;
+       uint8_t  USBKeys_SentCLI = 0;
 
 // 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
 volatile uint8_t  USBKeys_LEDs = 0;
@@ -122,20 +122,20 @@ USBKeyChangeState USBKeys_Changed = USBKeyChangeState_None;
 
 // the idle configuration, how often we send the report to the
 // host (ms * 4) even when it hasn't changed
-         uint8_t  USBKeys_Idle_Config = 125;
+       uint8_t  USBKeys_Idle_Config = 125;
 
 // count until idle timeout
-         uint8_t  USBKeys_Idle_Count = 0;
+       uint8_t  USBKeys_Idle_Count = 0;
 
 // Indicates whether the Output module is fully functional
 // 0 - Not fully functional, 1 - Fully functional
 // 0 is often used to show that a USB cable is not plugged in (but has power)
-         uint8_t  Output_Available = 0;
+       uint8_t  Output_Available = 0;
 
 // Debug control variable for Output modules
 // 0 - Debug disabled (default)
 // 1 - Debug enabled
-         uint8_t  Output_DebugMode = 0;
+        uint8_t  Output_DebugMode = 0;
 
 
 
@@ -229,6 +229,21 @@ void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *
 }
 
 
+// Ignores the given key status update
+// Used to prevent fall-through, this is the None keyword in KLL
+void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+       // Display capability name
+       if ( stateType == 0xFF && state == 0xFF )
+       {
+               print("Output_noneSend()");
+               return;
+       }
+
+       // Nothing to do, because that's the point :P
+}
+
+
 // Sends a System Control code to the USB Output buffer
 void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
 {