Adding CLI and CDC Serial support for Teensy 2.0 and Teensy 2.0++

[kiibohd-controller.git] / Output / pjrcUSB / avr / usb_keyboard_debug.h

diff --git a/Output/pjrcUSB/avr/usb_keyboard_debug.h b/Output/pjrcUSB/avr/usb_keyboard_debug.h
deleted file mode 100644 (file)
index 121215d..0000000
--- a/Output/pjrcUSB/avr/usb_keyboard_debug.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef usb_serial_h__
-#define usb_serial_h__
-
-#include <stdint.h>
-#include "output_com.h"
-
-void usb_init(void);                   // initialize everything
-uint8_t usb_configured(void);          // is the USB port configured
-
-int8_t usb_keyboard_send(void);
-
-
-int8_t usb_debug_putchar(uint8_t c);   // transmit a character
-void usb_debug_flush_output(void);     // immediately transmit any buffered output
-#define USB_DEBUG_HID
-
-
-// Everything below this point is only intended for usb_serial.c
-#ifdef USB_SERIAL_PRIVATE_INCLUDE
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#define EP_TYPE_CONTROL                        0x00
-#define EP_TYPE_BULK_IN                        0x81
-#define EP_TYPE_BULK_OUT               0x80
-#define EP_TYPE_INTERRUPT_IN           0xC1
-#define EP_TYPE_INTERRUPT_OUT          0xC0
-#define EP_TYPE_ISOCHRONOUS_IN         0x41
-#define EP_TYPE_ISOCHRONOUS_OUT                0x40
-
-#define EP_SINGLE_BUFFER               0x02
-#define EP_DOUBLE_BUFFER               0x06
-
-#define EP_SIZE(s)     ((s) == 64 ? 0x30 :     \
-                       ((s) == 32 ? 0x20 :     \
-                       ((s) == 16 ? 0x10 :     \
-                                    0x00)))
-
-#define MAX_ENDPOINT           4
-
-#define LSB(n) (n & 255)
-#define MSB(n) ((n >> 8) & 255)
-
-#if defined(__AVR_AT90USB162__)
-#define HW_CONFIG() 
-#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
-#define USB_CONFIG() (USBCON = (1<<USBE))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_ATmega32U4__)
-#define HW_CONFIG() (UHWCON = 0x01)
-#define PLL_CONFIG() (PLLCSR = 0x12)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_AT90USB646__)
-#define HW_CONFIG() (UHWCON = 0x81)
-#define PLL_CONFIG() (PLLCSR = 0x1A)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_AT90USB1286__)
-#define HW_CONFIG() (UHWCON = 0x81)
-#define PLL_CONFIG() (PLLCSR = 0x16)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#endif
-
-// standard control endpoint request types
-#define GET_STATUS                     0
-#define CLEAR_FEATURE                  1
-#define SET_FEATURE                    3
-#define SET_ADDRESS                    5
-#define GET_DESCRIPTOR                 6
-#define GET_CONFIGURATION              8
-#define SET_CONFIGURATION              9
-#define GET_INTERFACE                  10
-#define SET_INTERFACE                  11
-// HID (human interface device)
-#define HID_GET_REPORT                 1
-#define HID_GET_IDLE                   2
-#define HID_GET_PROTOCOL               3
-#define HID_SET_REPORT                 9
-#define HID_SET_IDLE                   10
-#define HID_SET_PROTOCOL               11
-// CDC (communication class device)
-#define CDC_SET_LINE_CODING            0x20
-#define CDC_GET_LINE_CODING            0x21
-#define CDC_SET_CONTROL_LINE_STATE     0x22
-#endif
-#endif
-