//#define UART_DEBUG_UNKNOWN 1
-#define TX_STATE_BOTH_FREE_EVEN_FIRST 0
-#define TX_STATE_BOTH_FREE_ODD_FIRST 1
-#define TX_STATE_EVEN_FREE 2
-#define TX_STATE_ODD_FREE 3
-#define TX_STATE_NONE_FREE_EVEN_FIRST 4
-#define TX_STATE_NONE_FREE_ODD_FIRST 5
-
-#define BDT_OWN 0x80
-#define BDT_DATA1 0x40
-#define BDT_DATA0 0x00
-#define BDT_DTS 0x08
-#define BDT_STALL 0x04
+#define TX_STATE_BOTH_FREE_EVEN_FIRST 0
+#define TX_STATE_BOTH_FREE_ODD_FIRST 1
+#define TX_STATE_EVEN_FREE 2
+#define TX_STATE_ODD_FREE 3
+#define TX_STATE_NONE_FREE_EVEN_FIRST 4
+#define TX_STATE_NONE_FREE_ODD_FIRST 5
+
+#define BDT_OWN 0x80
+#define BDT_DATA1 0x40
+#define BDT_DATA0 0x00
+#define BDT_DTS 0x08
+#define BDT_STALL 0x04
#define TX 1
#define RX 0
#define DATA1 1
-#define GET_STATUS 0
-#define CLEAR_FEATURE 1
-#define SET_FEATURE 3
-#define SET_ADDRESS 5
-#define GET_DESCRIPTOR 6
-#define SET_DESCRIPTOR 7
-#define GET_CONFIGURATION 8
-#define SET_CONFIGURATION 9
-#define GET_INTERFACE 10
-#define SET_INTERFACE 11
-#define SYNCH_FRAME 12
+#define GET_STATUS 0
+#define CLEAR_FEATURE 1
+#define SET_FEATURE 3
+#define SET_ADDRESS 5
+#define GET_DESCRIPTOR 6
+#define SET_DESCRIPTOR 7
+#define GET_CONFIGURATION 8
+#define SET_CONFIGURATION 9
+#define GET_INTERFACE 10
+#define SET_INTERFACE 11
+#define SYNCH_FRAME 12
-#define TX_STATE_BOTH_FREE_EVEN_FIRST 0
-#define TX_STATE_BOTH_FREE_ODD_FIRST 1
-#define TX_STATE_EVEN_FREE 2
-#define TX_STATE_ODD_FREE 3
-#define TX_STATE_NONE_FREE 4
+#define TX_STATE_BOTH_FREE_EVEN_FIRST 0
+#define TX_STATE_BOTH_FREE_ODD_FIRST 1
+#define TX_STATE_EVEN_FREE 2
+#define TX_STATE_ODD_FREE 3
+#define TX_STATE_NONE_FREE 4
// ----- Macros -----
-#define BDT_PID(n) (((n) >> 2) & 15)
+#define BDT_PID(n) (((n) >> 2) & 15)
-#define BDT_DESC(count, data) (BDT_OWN | BDT_DTS \
+#define BDT_DESC(count, data) (BDT_OWN | BDT_DTS \
| ((data) ? BDT_DATA1 : BDT_DATA0) \
| ((count) << 16))
serial_phex(b->desc >> 16);
serial_print("\n");
#endif
- endpoint--; // endpoint is index to zero-based arrays
+ endpoint--; // endpoint is index to zero-based arrays
if ( stat & 0x08 )
{ // transmit
// If no USB cable is attached, do not initialize usb
// XXX Test -HaaTa
//if ( USB0_OTGISTAT & USB_OTGSTAT_ID )
- // return 0;
+ // return 0;
// Clear out endpoints table
for ( int i = 0; i <= NUM_ENDPOINTS * 4; i++ )