/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
+ * Modified by Jacob Alexander (2013-2016)
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
- * 1. The above copyright notice and this permission notice shall be
+ * 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * 2. If the Software is incorporated into a build system that allows
+ * 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
* SOFTWARE.
*/
-#ifndef _usb_desc_h_
-#define _usb_desc_h_
+#pragma once
-// This header is NOT meant to be included when compiling
-// user sketches in Arduino. The low-level functions
-// provided by usb_dev.c are meant to be called only by
-// code which provides higher-level interfaces to the user.
+// ----- Includes -----
+// Compiler Includes
#include <stdint.h>
#include <stddef.h>
-#include "output_com.h"
-
-#define ENDPOINT_UNUSED 0x00
-#define ENDPOINT_TRANSIMIT_ONLY 0x15
-#define ENDPOINT_RECEIVE_ONLY 0x19
-#define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D
-
-// Some operating systems, especially Windows, may cache USB device
-// info. Changes to the device name may not update on the same
-// computer unless the vendor or product ID numbers change, or the
-// "bcdDevice" revision code is increased.
-
-#define DEVICE_CLASS 0xEF
-#define DEVICE_SUBCLASS 0x02
-#define DEVICE_PROTOCOL 0x01
-#define EP0_SIZE 64
-#define NUM_ENDPOINTS 15
-#define NUM_INTERFACE 4
-#define CDC_IAD_DESCRIPTOR 1
-#define CDC_STATUS_INTERFACE 0
-#define CDC_DATA_INTERFACE 1 // Serial
-#define CDC_ACM_ENDPOINT 2
-#define CDC_RX_ENDPOINT 3
-#define CDC_TX_ENDPOINT 4
-#define CDC_ACM_SIZE 16
-#define CDC_RX_SIZE 64
-#define CDC_TX_SIZE 64
-#define KEYBOARD_INTERFACE 2 // Keyboard
-#define KEYBOARD_ENDPOINT 1
-#define KEYBOARD_SIZE 8
-#define KEYBOARD_INTERVAL 1
-#define MOUSE_INTERFACE 3 // Mouse
-#define MOUSE_ENDPOINT 5
-#define MOUSE_SIZE 8
-#define MOUSE_INTERVAL 2
-#define KEYBOARD_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9)
-#define MOUSE_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
-#define CONFIG_DESC_SIZE (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7)
-#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
-#define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
+// Local Includes
+#include <output_com.h>
-// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
-extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];
+
+// ----- Defines -----
+
+#define ENDPOINT_UNUSED 0x00
+#define ENDPOINT_TRANSIMIT_ONLY 0x15
+#define ENDPOINT_RECEIVE_ONLY 0x19
+#define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D
+
+
+#define DEVICE_CLASS 0x00 // Keep 0x00 to indicate each sub device will indicate what it is
+#define DEVICE_SUBCLASS 0x00
+#define DEVICE_PROTOCOL 0x00
+#define EP0_SIZE 64
+#define NUM_ENDPOINTS 8
+#define NUM_USB_BUFFERS 30
+#define NUM_INTERFACE 7
+
+#define KEYBOARD_INTERFACE 0 // Keyboard
+#define KEYBOARD_ENDPOINT 1
+#define KEYBOARD_SIZE 8
+#define KEYBOARD_INTERVAL 1
+#define KEYBOARD_NAME L"Boot Keyboard"
+
+#define NKRO_KEYBOARD_INTERFACE 1 // NKRO Keyboard
+#define NKRO_KEYBOARD_ENDPOINT 2
+#define NKRO_KEYBOARD_SIZE 64
+#define NKRO_KEYBOARD_INTERVAL 1
+#define NKRO_KEYBOARD_NAME L"NKRO Keyboard"
+
+#define CDC_IAD_DESCRIPTOR 1
+#define CDC_STATUS_INTERFACE 2
+#define CDC_DATA_INTERFACE 3 // Serial
+#define CDC_ACM_ENDPOINT 3
+#define CDC_RX_ENDPOINT 4
+#define CDC_TX_ENDPOINT 5
+#define CDC_ACM_SIZE 16
+#define CDC_RX_SIZE 64
+#define CDC_TX_SIZE 64
+#define CDC_STATUS_NAME L"Virtual Serial Port - Status"
+#define CDC_DATA_NAME L"Virtual Serial Port - Data"
+
+#define MOUSE_INTERFACE 4 // Mouse
+#define MOUSE_ENDPOINT 6
+#define MOUSE_SIZE 8
+#define MOUSE_INTERVAL 1
+#define MOUSE_NAME L"Mouse"
+
+#define JOYSTICK_INTERFACE 5 // Joystick
+#define JOYSTICK_ENDPOINT 7
+#define JOYSTICK_SIZE 16
+#define JOYSTICK_INTERVAL 1
+#define JOYSTICK_NAME L"Joystick"
+
+#define SYS_CTRL_INTERFACE 6 // Media Keys
+#define SYS_CTRL_ENDPOINT 8
+#define SYS_CTRL_SIZE 8
+#define SYS_CTRL_INTERVAL 1
+#define SYS_CTRL_NAME L"Media Keys"
+
+#define KEYBOARD_DESC_OFFSET (9 + 9)
+#define NKRO_KEYBOARD_DESC_OFFSET (9 + 9+9+7 + 9)
+#define SERIAL_CDC_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8)
+#define MOUSE_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9)
+#define JOYSTICK_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
+#define SYS_CTRL_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
+#define CONFIG_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
+
+#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
+#define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
+#define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
+#define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
+#define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
+#define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY
+#define ENDPOINT7_CONFIG ENDPOINT_TRANSIMIT_ONLY
+#define ENDPOINT8_CONFIG ENDPOINT_TRANSIMIT_ONLY
+
+
+
+// ----- Enumerations -----
typedef struct {
- uint16_t wValue;
- uint16_t wIndex;
- const uint8_t *addr;
- uint16_t length;
+ uint16_t wValue;
+ uint16_t wIndex;
+ const uint8_t *addr;
+ uint16_t length;
} usb_descriptor_list_t;
-extern const usb_descriptor_list_t usb_descriptor_list[];
-#endif
+// ----- Variables -----
+
+// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
+extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];
+
+extern const usb_descriptor_list_t usb_descriptor_list[];
+
+extern uint8_t *usb_bMaxPower;