.SILENT:
endif
+# Never run this makefile in parallel, as it could screw things up
+# It won't affect the submakes, so you still get the speedup from specifying -jx
+.NOTPARALLEL:
+
# Allow the silent with lower caps to work the same way as upper caps
ifdef silent
SILENT = $(silent)
ABS_STARTING_DIR := $(dir $(ABS_STARTING_MAKEFILE))
ABS_ROOT_DIR := $(dir $(ABS_ROOT_MAKEFILE))
STARTING_DIR := $(subst $(ABS_ROOT_DIR),,$(ABS_STARTING_DIR))
+BUILD_DIR := $(ROOT_DIR)/.build
+TEST_DIR := $(BUILD_DIR)/test
+ERROR_FILE := $(BUILD_DIR)/error_occured
MAKEFILE_INCLUDED=yes
# PARSE_ALL_KEYBOARDS
ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,allkb),true)
$$(eval $$(call PARSE_ALL_KEYBOARDS))
+ else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
+ $$(eval $$(call PARSE_TEST))
# If the rule starts with the name of a known keyboard, then continue
# the parsing from PARSE_KEYBOARD
else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYBOARDS)),true)
# If there's no matching subproject, we assume it's the default
# This will allow you to leave the subproject part of the target out
else
- $$(eval $$(call PARSE_SUBPROJECT,defaultsp))
+ $$(eval $$(call PARSE_SUBPROJECT,))
endif
endef
define PARSE_SUBPROJECT
# If we want to compile the default subproject, then we need to
# include the correct makefile to determine the actual name of it
- ifeq ($1,defaultsp)
+ CURRENT_SP := $1
+ ifeq ($$(CURRENT_SP),)
+ CURRENT_SP := defaultsp
+ endif
+ ifeq ($$(CURRENT_SP),defaultsp)
SUBPROJECT_DEFAULT=
$$(eval include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/Makefile)
CURRENT_SP := $$(SUBPROJECT_DEFAULT)
- else
- CURRENT_SP := $1
endif
# If current subproject is empty (the default was not defined), and we have a list of subproject
# then make all of them
# Otherwise try to match the keymap from the current folder, or arguments to the make command
else ifneq ($$(KEYMAP),)
$$(eval $$(call PARSE_KEYMAP,$$(KEYMAP)))
+ # No matching keymap found, so we assume that the rest of the rule is the target
+ # If we haven't been able to parse out a subproject, then make all of them
+ # This is consistent with running make without any arguments from the keyboard
+ # folder
+ else ifeq ($1,)
+ $$(eval $$(call PARSE_ALL_SUBPROJECTS))
+ # Otherwise, make all keymaps, again this is consistent with how it works without
+ # any arguments
else
- # Otherwise something is wrong with the target
- # Try to give as much information as possible of what it it was trying to do
- ifeq ($$(CURRENT_SP),)
- $$(info make: *** No rule to make target '$$(CURRENT_KB)-$$(RULE)'. Stop.)
- else
- $$(info make: *** No rule to make target '$$(CURRENT_KB)-$$(CURRENT_SP)-$$(RULE)'. Stop.)
- endif
- # Notice the tab instead of spaces below!
- exit 1
+ $$(eval $$(call PARSE_ALL_KEYMAPS))
endif
else
# As earlier mentione,d when allsb is specified, we call our self recursively
MAKE_TARGET := $$(patsubst -%,%,$$(RULE))
# We need to generate an unique indentifer to append to the COMMANDS list
COMMAND := COMMAND_KEYBOARD_$$(CURRENT_KB)_SUBPROJECT_$(CURRENT_SP)_KEYMAP_$$(CURRENT_KM)
- COMMANDS += $$(COMMAND)
# If we are compiling a keyboard without a subproject, we want to display just the name
# of the keyboard, otherwise keyboard/subproject
ifeq ($$(CURRENT_SP),)
KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR)
# Specify the variables that we are passing forward to submake
MAKE_VARS := KEYBOARD=$$(CURRENT_KB) SUBPROJECT=$$(CURRENT_SP) KEYMAP=$$(CURRENT_KM)
- MAKE_VARS += VERBOSE=$(VERBOSE) COLOR=$(COLOR)
# And the first part of the make command
MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_keyboard.mk $$(MAKE_TARGET)
# The message to display
MAKE_MSG := $$(MSG_MAKE_KB)
# We run the command differently, depending on if we want more output or not
# The true version for silent output and the false version otherwise
+ $$(eval $$(call BUILD))
+endef
+
+define BUILD
+ MAKE_VARS += VERBOSE=$(VERBOSE) COLOR=$(COLOR)
+ COMMANDS += $$(COMMAND)
COMMAND_true_$$(COMMAND) := \
printf "$$(MAKE_MSG)" | \
$$(MAKE_MSG_FORMAT); \
fi;
COMMAND_false_$$(COMMAND) := \
printf "$$(MAKE_MSG)\n\n"; \
- $$(MAKE_CMD) $$(MAKE_VARS) SILENT=false;
+ $$(MAKE_CMD) $$(MAKE_VARS) SILENT=false; \
+ if [ $$$$? -gt 0 ]; \
+ then error_occured=1; \
+ fi;
endef
# Just parse all the keymaps for a specifc keyboard
$$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYMAP,$$(KEYMAPS)))
endef
+define BUILD_TEST
+ TEST_NAME := $1
+ MAKE_TARGET := $2
+ COMMAND := $1
+ MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_test.mk $$(MAKE_TARGET)
+ MAKE_VARS := TEST=$$(TEST_NAME)
+ MAKE_MSG := $$(MSG_MAKE_TEST)
+ $$(eval $$(call BUILD))
+ ifneq ($$(MAKE_TARGET),clean)
+ TEST_EXECUTABLE := $$(TEST_DIR)/$$(TEST_NAME).elf
+ TESTS += $$(TEST_NAME)
+ TEST_MSG := $$(MSG_TEST)
+ $$(TEST_NAME)_COMMAND := \
+ printf "$$(TEST_MSG)\n"; \
+ $$(TEST_EXECUTABLE); \
+ if [ $$$$? -gt 0 ]; \
+ then error_occured=1; \
+ fi; \
+ printf "\n";
+ endif
+endef
+
+define PARSE_TEST
+ TESTS :=
+ TEST_NAME := $$(firstword $$(subst -, ,$$(RULE)))
+ TEST_TARGET := $$(subst $$(TEST_NAME),,$$(subst $$(TEST_NAME)-,,$$(RULE)))
+ ifeq ($$(TEST_NAME),all)
+ MATCHED_TESTS := $$(TEST_LIST)
+ else
+ MATCHED_TESTS := $$(foreach TEST,$$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME),$$(TEST)),$$(TEST),))
+ endif
+ $$(foreach TEST,$$(MATCHED_TESTS),$$(eval $$(call BUILD_TEST,$$(TEST),$$(TEST_TARGET))))
+endef
+
+
# Set the silent mode depending on if we are trying to compile multiple keyboards or not
# By default it's on in that case, but it can be overriden by specifying silent=false
# from the command line
include $(ROOT_DIR)/message.mk
-RUN_COMMAND = \
-$(COMMAND_$(SILENT_MODE)_$(COMMAND))
+# The empty line is important here, as it will force a new shell to be created for each command
+# Otherwise the command line will become too long with a lot of keyboards and keymaps
+define RUN_COMMAND
++error_occured=0;\
+$(COMMAND_$(SILENT_MODE)_$(COMMAND))\
+if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi;
+
+
+endef
+define RUN_TEST
++error_occured=0;\
+$($(TEST)_COMMAND))\
+if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi;
+
+endef
# Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps
SUBPROJECTS := $(notdir $(patsubst %/Makefile,%,$(wildcard ./*/Makefile)))
.PHONY: %
%:
# Check if we have the CMP tool installed
- cmp --version >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
+ cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
# Check if the submodules are dirty, and display a warning if they are
git submodule status --recursive 2>/dev/null | \
while IFS= read -r x; do \
*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
esac \
done
+ rm -f $(ERROR_FILE) > /dev/null 2>&1
$(eval $(call PARSE_RULE,$@))
$(eval $(call SET_SILENT_MODE))
# Run all the commands in the same shell, notice the + at the first line
# it has to be there to allow parallel execution of the submake
# This always tries to compile everything, even if error occurs in the middle
# But we return the error code at the end, to trigger travis failures
- +error_occured=0; \
- $(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND)) \
- if [ $$error_occured -gt 0 ]; then printf "$(MSG_ERRORS)" & exit $$error_occured; fi
-
+ $(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
+ if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
+ $(foreach TEST,$(TESTS),$(RUN_TEST))
+ if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
# All should compile everything
.PHONY: all
-all: all-keyboards
+all: all-keyboards test-all
# Define some shortcuts, mostly for compability with the old syntax
.PHONY: all-keyboards
.PHONY: all-keyboards-defaults
all-keyboards-defaults: allkb-allsp-default
+.PHONY: test
+test: test-all
+
+.PHONY: test-clean
+test-clean: test-all-clean
# Generate the version.h file
GIT_VERSION := $(shell git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
BUILD_DATE := $(shell date +"%Y-%m-%d-%H:%M:%S")
$(shell echo '#define QMK_VERSION "$(GIT_VERSION)"' > $(ROOT_DIR)/quantum/version.h)
-$(shell echo '#define QMK_BUILDDATE "$(BUILD_DATE)"' >> $(ROOT_DIR)/quantum/version.h)
\ No newline at end of file
+$(shell echo '#define QMK_BUILDDATE "$(BUILD_DATE)"' >> $(ROOT_DIR)/quantum/version.h)
+
+include $(ROOT_DIR)/testlist.mk
projects / qmk_firmware.git / blobdiff