#include <led.h>
#include <print.h>
#include <scan_loop.h>
-#include <output_com.h>
// Keymaps
#include "usb_hid.h"
void cliFunc_capList ( char* args );
void cliFunc_capSelect ( char* args );
+void cliFunc_keyHold ( char* args );
void cliFunc_keyPress ( char* args );
void cliFunc_keyRelease( char* args );
void cliFunc_layerList ( char* args );
// ----- Variables -----
// Macro Module command dictionary
-char* macroCLIDictName = "Macro Module Commands";
-CLIDictItem macroCLIDict[] = {
+const char macroCLIDictName[] = "Macro Module Commands";
+const CLIDictItem macroCLIDict[] = {
{ "capList", "Prints an indexed list of all non USB keycode capabilities.", cliFunc_capList },
{ "capSelect", "Triggers the specified capabilities. First two args are state and stateType." NL "\t\t\033[35mK11\033[0m Keyboard Capability 0x0B", cliFunc_capSelect },
- { "keyPress", "Send key-presses to the macro module. Held until released. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyPress },
- { "keyRelease", "Release a key-press from the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyRelease },
+ { "keyHold", "Send key-hold events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyHold },
+ { "keyPress", "Send key-press events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyPress },
+ { "keyRelease", "Send key-release event to macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyRelease },
{ "layerList", "List available layers.", cliFunc_layerList },
{ "layerState", "Modify specified indexed layer state <layer> <state byte>." NL "\t\t\033[35mL2\033[0m Indexed Layer 0x02" NL "\t\t0 Off, 1 Shift, 2 Latch, 4 Lock States", cliFunc_layerState },
{ "macroDebug", "Disables/Enables sending USB keycodes to the Output Module and prints U/K codes.", cliFunc_macroDebug },
+// ----- Capabilities -----
+
+// Modifies the specified Layer control byte
+// Argument #1: Layer Index -> unsigned int
+// Argument #2: Toggle byte -> uint8_t
+void Macro_layerStateToggle_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Macro_layerState(layerIndex,toggleByte)");
+ return;
+ }
+
+ // Get layer index from arguments
+ // Cast pointer to uint8_t to unsigned int then access that memory location
+ unsigned int layer = *(unsigned int*)(&args[0]);
+
+ // Get layer toggle byte
+ uint8_t toggleByte = args[ sizeof(unsigned int) ];
+
+ // Is layer in the LayerIndexStack?
+ uint8_t inLayerIndexStack = 0;
+ unsigned int stackItem = 0;
+ while ( stackItem < macroLayerIndexStackSize )
+ {
+ // Flag if layer is already in the LayerIndexStack
+ if ( macroLayerIndexStack[ stackItem ] == layer )
+ {
+ inLayerIndexStack = 1;
+ break;
+ }
+
+ // Increment to next item
+ stackItem++;
+ }
+
+ // Toggle Layer State Byte
+ if ( LayerIndex[ layer ].state & toggleByte )
+ {
+ // Unset
+ LayerIndex[ layer ].state &= ~toggleByte;
+ }
+ else
+ {
+ // Set
+ LayerIndex[ layer ].state |= toggleByte;
+ }
+
+ // If the layer was not in the LayerIndexStack add it
+ if ( !inLayerIndexStack )
+ {
+ macroLayerIndexStack[ macroLayerIndexStackSize++ ] = layer;
+ }
+
+ // If the layer is in the LayerIndexStack and the state is 0x00, remove
+ if ( LayerIndex[ layer ].state == 0x00 && inLayerIndexStack )
+ {
+ // Remove the layer from the LayerIndexStack
+ // Using the already positioned stackItem variable from the loop above
+ while ( stackItem < macroLayerIndexStackSize )
+ {
+ macroLayerIndexStack[ stackItem ] = macroLayerIndexStack[ stackItem + 1 ];
+ stackItem++;
+ }
+
+ // Reduce LayerIndexStack size
+ macroLayerIndexStackSize--;
+ }
+}
+
+
+
// ----- Functions -----
// Looks up the trigger list for the given scan code (from the active layer)
unsigned int *Macro_layerLookup( uint8_t scanCode )
{
// If no trigger macro is defined at the given layer, fallthrough to the next layer
- for ( unsigned int layer = 0; layer < macroLayerIndexStackSize; layer++ )
+ for ( unsigned int layerIndex = 0; layerIndex < macroLayerIndexStackSize; layerIndex++ )
{
- // Lookup layer
- unsigned int **map = LayerIndex[ macroLayerIndexStack[ layer ] ].triggerMap;
+ // Lookup Layer
+ Layer *layer = &LayerIndex[ macroLayerIndexStack[ layerIndex ] ];
+
+ // Check if latch has been pressed for this layer
+ // XXX Regardless of whether a key is found, the latch is removed on first lookup
+ uint8_t latch = layer->state & 0x02;
+ if ( latch )
+ {
+ layer->state &= ~0x02;
+ }
- // Determine if layer has key defined
- if ( map != 0 && *map[ scanCode ] != 0 )
- return map[ scanCode ];
+ // Only use layer, if state is valid
+ // XOR each of the state bits
+ // If only two are enabled, do not use this state
+ if ( (layer->state & 0x01) ^ (latch>>1) ^ ((layer->state & 0x04)>>2) )
+ {
+ // Lookup layer
+ unsigned int **map = (unsigned int**)layer->triggerMap;
+
+ // Determine if layer has key defined
+ if ( map != 0 && *map[ scanCode ] != 0 )
+ return map[ scanCode ];
+ }
}
// Do lookup on default layer
- unsigned int **map = LayerIndex[0].triggerMap;
+ unsigned int **map = (unsigned int**)LayerIndex[0].triggerMap;
// Determine if layer has key defined
if ( map == 0 && *map[ scanCode ] == 0 )
// Proceed, decrementing the step counter
macroStepCounter--;
+ dbug_print("Macro Step");
}
// Update pending trigger list, before processing TriggerMacros
// Update the macroResultMacroPendingListSize with the tail pointer
macroResultMacroPendingListSize = macroResultMacroPendingListTail;
- /* TODO
- // Loop through input buffer
- for ( uint8_t index = 0; index < KeyIndex_BufferUsed && !macroDebugMode; index++ )
- {
- // Get the keycode from the buffer
- uint8_t key = KeyIndex_Buffer[index];
-
- // Set the modifier bit if this key is a modifier
- if ( (key & KEY_LCTRL) == KEY_LCTRL ) // AND with 0xE0
- {
- USBKeys_Modifiers |= 1 << (key ^ KEY_LCTRL); // Left shift 1 by key XOR 0xE0
-
- // Modifier processed, move on to the next key
- continue;
- }
-
- // Too many keys
- if ( USBKeys_Sent >= USBKeys_MaxSize )
- {
- warn_msg("USB Key limit reached");
- errorLED( 1 );
- break;
- }
-
- USBKeys_Array[USBKeys_Sent++] = key;
- }
- */
-
// Signal buffer that we've used it
Scan_finishedWithMacro( macroTriggerListBufferSize );
// Initialize TriggerMacro states
for ( unsigned int macro = 0; macro < TriggerMacroNum; macro++ )
{
- TriggerMacroList[ macro ].result = 0;
TriggerMacroList[ macro ].pos = 0;
TriggerMacroList[ macro ].state = TriggerMacro_Waiting;
}
{
print( NL );
info_msg("Capabilities List");
+ printHex( CapabilitiesNum );
// Iterate through all of the capabilities and display them
for ( unsigned int cap = 0; cap < CapabilitiesNum; cap++ )
// Keyboard Capability
case 'K':
// Determine capability index
- cap = decToInt( &arg1Ptr[1] );
+ cap = numToInt( &arg1Ptr[1] );
// Lookup the number of args
totalArgs += CapabilitiesList[ cap ].argCount;
// Because allocating memory isn't doable, and the argument count is arbitrary
// The argument pointer is repurposed as the argument list (much smaller anyways)
- argSet[ argSetCount++ ] = (uint8_t)decToInt( arg1Ptr );
+ argSet[ argSetCount++ ] = (uint8_t)numToInt( arg1Ptr );
// Once all the arguments are prepared, call the keyboard capability function
if ( argSetCount == totalArgs )
}
}
+void cliFunc_keyHold( char* args )
+{
+ // Parse codes from arguments
+ char* curArgs;
+ char* arg1Ptr;
+ char* arg2Ptr = args;
+
+ // Process all args
+ for ( ;; )
+ {
+ curArgs = arg2Ptr;
+ CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
+
+ // Stop processing args if no more are found
+ if ( *arg1Ptr == '\0' )
+ break;
+
+ // Ignore non-Scancode numbers
+ switch ( arg1Ptr[0] )
+ {
+ // Scancode
+ case 'S':
+ Macro_keyState( (uint8_t)numToInt( &arg1Ptr[1] ), 0x02 ); // Hold scancode
+ break;
+ }
+ }
+}
+
void cliFunc_keyPress( char* args )
{
// Parse codes from arguments
{
// Scancode
case 'S':
- Macro_keyState( (uint8_t)decToInt( &arg1Ptr[1] ), 0x01 ); // Press scancode
+ Macro_keyState( (uint8_t)numToInt( &arg1Ptr[1] ), 0x01 ); // Press scancode
break;
}
}
{
// Scancode
case 'S':
- Macro_keyState( (uint8_t)decToInt( &arg1Ptr[1] ), 0x03 ); // Release scancode
+ Macro_keyState( (uint8_t)numToInt( &arg1Ptr[1] ), 0x03 ); // Release scancode
break;
}
}
print(" - ");
// Display layer name
- dPrint( LayerIndex[ layer ].name );
+ dPrint( (char*)LayerIndex[ layer ].name );
// Default map
if ( layer == 0 )
if ( arg1Ptr[0] != 'L' )
return;
- arg1 = (uint8_t)decToInt( &arg1Ptr[1] );
+ arg1 = (uint8_t)numToInt( &arg1Ptr[1] );
break;
// Second argument (e.g. 4)
case 1:
- arg2 = (uint8_t)decToInt( arg1Ptr );
+ arg2 = (uint8_t)numToInt( arg1Ptr );
// Display operation (to indicate that it worked)
print( NL );
void cliFunc_macroList( char* args )
{
+ // Show pending key events
+ print( NL );
+ info_msg("Pending Key Events: ");
+ printInt16( (uint16_t)macroTriggerListBufferSize );
+ print(" : ");
+ for ( uint8_t key = 0; key < macroTriggerListBufferSize; key++ )
+ {
+ printHex( macroTriggerListBuffer[ key ].scanCode );
+ print(" ");
+ }
+
+ // Show pending trigger macros
+ print( NL );
+ info_msg("Pending Trigger Macros: ");
+ printInt16( (uint16_t)macroTriggerMacroPendingListSize );
+ print(" : ");
+ for ( unsigned int macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
+ {
+ printHex( macroTriggerMacroPendingList[ macro ] );
+ print(" ");
+ }
+
+ // Show pending result macros
+ print( NL );
+ info_msg("Pending Result Macros: ");
+ printInt16( (uint16_t)macroResultMacroPendingListSize );
+ print(" : ");
+ for ( unsigned int macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ {
+ printHex( macroResultMacroPendingList[ macro ] );
+ print(" ");
+ }
+
// Show available trigger macro indices
print( NL );
info_msg("Trigger Macros Range: T0 -> T");
{
// Indexed Trigger Macro
case 'T':
- macroDebugShowTrigger( decToInt( &arg1Ptr[1] ) );
+ macroDebugShowTrigger( numToInt( &arg1Ptr[1] ) );
break;
// Indexed Result Macro
case 'R':
- macroDebugShowResult( decToInt( &arg1Ptr[1] ) );
+ macroDebugShowResult( numToInt( &arg1Ptr[1] ) );
break;
}
}
char* arg2Ptr;
CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
+ // Default to 1, if no argument given
+ unsigned int count = (unsigned int)numToInt( arg1Ptr );
+
+ if ( count == 0 )
+ count = 1;
+
// Set the macro step counter, negative int's are cast to uint
- macroStepCounter = (unsigned int)decToInt( arg1Ptr );
+ macroStepCounter = count;
}