// Keymaps
#include "usb_hid.h"
-#include <defaultMap.h>
+//#include <defaultMap.h>
#include "templateKeymap.h" // TODO Use actual generated version
//#include "generatedKeymap.h" // TODO Use actual generated version
uint8_t macroPauseMode = 0;
// Macro step counter - If non-zero, the step counter counts down every time the macro module does one processing loop
-unsigned int macroStepCounter = 0;
+uint16_t macroStepCounter = 0;
// Key Trigger List Buffer
// TODO, figure out a good way to scale this array size without wasting too much memory, but not rejecting macros
// Possibly could be calculated by the KLL compiler
// XXX It may be possible to calculate the worst case using the KLL compiler
-unsigned int macroTriggerMacroPendingList[ TriggerMacroNum ] = { 0 };
-unsigned int macroTriggerMacroPendingListSize = 0;
+uint16_t macroTriggerMacroPendingList[ TriggerMacroNum ] = { 0 };
+uint16_t macroTriggerMacroPendingListSize = 0;
// Layer Index Stack
// * When modifying layer state and the state is non-0x0, the stack must be adjusted
-unsigned int macroLayerIndexStack[ LayerNum + 1 ] = { 0 };
-unsigned int macroLayerIndexStackSize = 0;
+uint16_t macroLayerIndexStack[ LayerNum + 1 ] = { 0 };
+uint16_t macroLayerIndexStackSize = 0;
// Pending Result Macro Index List
// * Any result macro that needs processing from a previous macro processing loop
-unsigned int macroResultMacroPendingList[ ResultMacroNum ] = { 0 };
-unsigned int macroResultMacroPendingListSize = 0;
+uint16_t macroResultMacroPendingList[ ResultMacroNum ] = { 0 };
+uint16_t macroResultMacroPendingListSize = 0;
{
// Is layer in the LayerIndexStack?
uint8_t inLayerIndexStack = 0;
- unsigned int stackItem = 0;
+ uint16_t stackItem = 0;
while ( stackItem < macroLayerIndexStackSize )
{
// Flag if layer is already in the LayerIndexStack
return;
// Get layer index from arguments
- // Cast pointer to uint8_t to unsigned int then access that memory location
+ // Cast pointer to uint8_t to uint16_t then access that memory location
uint16_t layer = *(uint16_t*)(&args[0]);
// Get layer toggle byte
return;
// Get layer index from arguments
- // Cast pointer to uint8_t to unsigned int then access that memory location
+ // Cast pointer to uint8_t to uint16_t then access that memory location
uint16_t layer = *(uint16_t*)(&args[0]);
Macro_layerState( state, stateType, layer, 0x02 );
return;
// Get layer index from arguments
- // Cast pointer to uint8_t to unsigned int then access that memory location
+ // Cast pointer to uint8_t to uint16_t then access that memory location
uint16_t layer = *(uint16_t*)(&args[0]);
Macro_layerState( state, stateType, layer, 0x04 );
return;
// Get layer index from arguments
- // Cast pointer to uint8_t to unsigned int then access that memory location
+ // Cast pointer to uint8_t to uint16_t then access that memory location
uint16_t layer = *(uint16_t*)(&args[0]);
Macro_layerState( state, stateType, layer, 0x01 );
nat_ptr_t *Macro_layerLookup( uint8_t scanCode )
{
// If no trigger macro is defined at the given layer, fallthrough to the next layer
- for ( unsigned int layerIndex = 0; layerIndex < macroLayerIndexStackSize; layerIndex++ )
+ for ( uint16_t layerIndex = 0; layerIndex < macroLayerIndexStackSize; layerIndex++ )
{
// Lookup Layer
Layer *layer = &LayerIndex[ macroLayerIndexStack[ layerIndex ] ];
inline void Macro_appendResultMacroToPendingList( TriggerMacro *triggerMacro )
{
// Lookup result macro index
- unsigned int resultMacroIndex = triggerMacro->result;
+ var_uint_t resultMacroIndex = triggerMacro->result;
// Iterate through result macro pending list, making sure this macro hasn't been added yet
- for ( unsigned int macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroResultMacroPendingListSize; macro++ )
{
// If duplicate found, do nothing
if ( macroResultMacroPendingList[ macro ] == resultMacroIndex )
macroResultMacroPendingList[ macroResultMacroPendingListSize++ ] = resultMacroIndex;
// Lookup scanCode of the last key in the last combo
- unsigned int pos = 0;
+ var_uint_t pos = 0;
for ( uint8_t comboLength = triggerMacro->guide[0]; comboLength > 0; )
{
pos += TriggerGuideSize * comboLength + 1;
// Check the second sequence combo length
// If non-zero return non-zero (long sequence)
// 0 otherwise (short sequence)
- unsigned int position = 1;
- for ( unsigned int result = 0; result < macro->guide[0]; result++ )
+ var_uint_t position = 1;
+ for ( var_uint_t result = 0; result < macro->guide[0]; result++ )
position += ResultGuideSize( (ResultGuide*)¯o->guide[ position ] );
return macro->guide[ position ];
}
// Evaluate/Update TriggerMacro
-inline TriggerMacroEval Macro_evalTriggerMacro( unsigned int triggerMacroIndex )
+inline TriggerMacroEval Macro_evalTriggerMacro( var_uint_t triggerMacroIndex )
{
// Lookup TriggerMacro
TriggerMacro *macro = &TriggerMacroList[ triggerMacroIndex ];
}
// Current Macro position
- unsigned int pos = macro->pos;
+ var_uint_t pos = macro->pos;
// Length of the combo being processed
uint8_t comboLength = macro->guide[ pos ] * TriggerGuideSize;
// Evaluate/Update ResultMacro
-inline ResultMacroEval Macro_evalResultMacro( unsigned int resultMacroIndex )
+inline ResultMacroEval Macro_evalResultMacro( var_uint_t resultMacroIndex )
{
// Lookup ResultMacro
ResultMacro *macro = &ResultMacroList[ resultMacroIndex ];
// Current Macro position
- unsigned int pos = macro->pos;
+ var_uint_t pos = macro->pos;
// Length of combo being processed
uint8_t comboLength = macro->guide[ pos ];
// Function Counter, used to keep track of the combo items processed
- unsigned int funcCount = 0;
+ var_uint_t funcCount = 0;
// Combo Item Position within the guide
- unsigned int comboItem = pos + 1;
+ var_uint_t comboItem = pos + 1;
// Iterate through the Result Combo
while ( funcCount < comboLength )
// Iterate over triggerList to see if any TriggerMacros need to be added
// First item is the number of items in the TriggerList
- for ( unsigned int macro = 1; macro < triggerListSize + 1; macro++ )
+ for ( var_uint_t macro = 1; macro < triggerListSize + 1; macro++ )
{
// Lookup trigger macro index
- unsigned int triggerMacroIndex = triggerList[ macro ];
+ var_uint_t triggerMacroIndex = triggerList[ macro ];
// Iterate over macroTriggerMacroPendingList to see if any macro in the scancode's
// triggerList needs to be added
- unsigned int pending = 0;
+ var_uint_t pending = 0;
for ( ; pending < macroTriggerMacroPendingListSize; pending++ )
{
// Stop scanning if the trigger macro index is found in the pending list
// Tail pointer for macroTriggerMacroPendingList
// Macros must be explicitly re-added
- unsigned int macroTriggerMacroPendingListTail = 0;
+ var_uint_t macroTriggerMacroPendingListTail = 0;
// Iterate through the pending TriggerMacros, processing each of them
- for ( unsigned int macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
{
switch ( Macro_evalTriggerMacro( macroTriggerMacroPendingList[ macro ] ) )
{
// Tail pointer for macroResultMacroPendingList
// Macros must be explicitly re-added
- unsigned int macroResultMacroPendingListTail = 0;
+ var_uint_t macroResultMacroPendingListTail = 0;
// Iterate through the pending ResultMacros, processing each of them
- for ( unsigned int macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroResultMacroPendingListSize; macro++ )
{
switch ( Macro_evalResultMacro( macroResultMacroPendingList[ macro ] ) )
{
macroTriggerListBufferSize = 0;
// Initialize TriggerMacro states
- for ( unsigned int macro = 0; macro < TriggerMacroNum; macro++ )
+ for ( var_uint_t macro = 0; macro < TriggerMacroNum; macro++ )
{
TriggerMacroList[ macro ].pos = 0;
TriggerMacroList[ macro ].state = TriggerMacro_Waiting;
}
// Initialize ResultMacro states
- for ( unsigned int macro = 0; macro < ResultMacroNum; macro++ )
+ for ( var_uint_t macro = 0; macro < ResultMacroNum; macro++ )
{
ResultMacroList[ macro ].pos = 0;
ResultMacroList[ macro ].state = 0;
printHex( CapabilitiesNum );
// Iterate through all of the capabilities and display them
- for ( unsigned int cap = 0; cap < CapabilitiesNum; cap++ )
+ for ( var_uint_t cap = 0; cap < CapabilitiesNum; cap++ )
{
print( NL "\t" );
printHex( cap );
char* arg2Ptr = args;
// Total number of args to scan (must do a lookup if a keyboard capability is selected)
- unsigned int totalArgs = 2; // Always at least two args
- unsigned int cap = 0;
+ var_uint_t totalArgs = 2; // Always at least two args
+ var_uint_t cap = 0;
// Arguments used for keyboard capability function
- unsigned int argSetCount = 0;
+ var_uint_t argSetCount = 0;
uint8_t *argSet = (uint8_t*)args;
// Process all args
- for ( unsigned int c = 0; argSetCount < totalArgs; c++ )
+ for ( var_uint_t c = 0; argSetCount < totalArgs; c++ )
{
curArgs = arg2Ptr;
CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
info_msg("Layer List");
// Iterate through all of the layers and display them
- for ( unsigned int layer = 0; layer < LayerNum; layer++ )
+ for ( uint16_t layer = 0; layer < LayerNum; layer++ )
{
print( NL "\t" );
printHex( layer );
info_msg("Pending Trigger Macros: ");
printInt16( (uint16_t)macroTriggerMacroPendingListSize );
print(" : ");
- for ( unsigned int macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
{
printHex( macroTriggerMacroPendingList[ macro ] );
print(" ");
info_msg("Pending Result Macros: ");
printInt16( (uint16_t)macroResultMacroPendingListSize );
print(" : ");
- for ( unsigned int macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroResultMacroPendingListSize; macro++ )
{
printHex( macroResultMacroPendingList[ macro ] );
print(" ");
// Show Trigger to Result Macro Links
print( NL );
info_msg("Trigger : Result Macro Pairs");
- for ( unsigned int macro = 0; macro < TriggerMacroNum; macro++ )
+ for ( var_uint_t macro = 0; macro < TriggerMacroNum; macro++ )
{
print( NL );
print("\tT");
printInt8( macroPauseMode );
}
-void macroDebugShowTrigger( unsigned int index )
+void macroDebugShowTrigger( var_uint_t index )
{
// Only proceed if the macro exists
if ( index >= TriggerMacroNum )
print( NL );
// Read the comboLength for combo in the sequence (sequence of combos)
- unsigned int pos = 0;
+ var_uint_t pos = 0;
uint8_t comboLength = macro->guide[ pos ];
// Iterate through and interpret the guide
while ( comboLength != 0 )
{
// Initial position of the combo
- unsigned int comboPos = ++pos;
+ var_uint_t comboPos = ++pos;
// Iterate through the combo
while ( pos < comboLength * TriggerGuideSize + comboPos )
}
}
-void macroDebugShowResult( unsigned int index )
+void macroDebugShowResult( var_uint_t index )
{
// Only proceed if the macro exists
if ( index >= ResultMacroNum )
print( NL );
// Read the comboLength for combo in the sequence (sequence of combos)
- unsigned int pos = 0;
+ var_uint_t pos = 0;
uint8_t comboLength = macro->guide[ pos++ ];
// Iterate through and interpret the guide
while ( comboLength != 0 )
{
// Function Counter, used to keep track of the combos processed
- unsigned int funcCount = 0;
+ var_uint_t funcCount = 0;
// Iterate through the combo
while ( funcCount < comboLength )
print("|");
// Display Function Ptr Address
- printHex( (unsigned int)CapabilitiesList[ guide->index ].func );
+ printHex( (nat_ptr_t)CapabilitiesList[ guide->index ].func );
print("|");
// Display/Lookup Capability Name (utilize debug mode of capability)
// Display Argument(s)
print("(");
- for ( unsigned int arg = 0; arg < CapabilitiesList[ guide->index ].argCount; arg++ )
+ for ( var_uint_t arg = 0; arg < CapabilitiesList[ guide->index ].argCount; arg++ )
{
// Arguments are only 8 bit values
printHex( (&guide->args)[ arg ] );
CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
// Default to 1, if no argument given
- unsigned int count = (unsigned int)numToInt( arg1Ptr );
+ var_uint_t count = (var_uint_t)numToInt( arg1Ptr );
if ( count == 0 )
count = 1;