#include <led.h>
#include <print.h>
#include <scan_loop.h>
-#include <output_com.h>
// Keymaps
#include "usb_hid.h"
-#include <defaultMap.h>
-#include "generatedKeymap.h" // TODO Use actual generated version
+//#include <defaultMap.h>
+#include "templateKeymap.h" // TODO Use actual generated version
+//#include "generatedKeymap.h" // TODO Use actual generated version
// Local Includes
#include "macro.h"
void cliFunc_capList ( char* args );
void cliFunc_capSelect ( char* args );
+void cliFunc_keyHold ( char* args );
void cliFunc_keyPress ( char* args );
void cliFunc_keyRelease( char* args );
void cliFunc_layerList ( char* args );
// Bit positions are important, passes (correct key) always trump incorrect key votes
typedef enum TriggerMacroVote {
- TriggerMacroVote_Release = 0x8, // Correct key
- TriggerMacroVote_PassRelease = 0xC, // Correct key (both pass and release)
- TriggerMacroVote_Pass = 0x4, // Correct key
- TriggerMacroVote_DoNothing = 0x2, // Incorrect key
- TriggerMacroVote_Fail = 0x1, // Incorrect key
- TriggerMacroVote_Invalid = 0x0, // Invalid state
+ TriggerMacroVote_Release = 0x10, // Correct key
+ TriggerMacroVote_PassRelease = 0x18, // Correct key (both pass and release)
+ TriggerMacroVote_Pass = 0x8, // Correct key
+ TriggerMacroVote_DoNothingRelease = 0x4, // Incorrect key
+ TriggerMacroVote_DoNothing = 0x2, // Incorrect key
+ TriggerMacroVote_Fail = 0x1, // Incorrect key
+ TriggerMacroVote_Invalid = 0x0, // Invalid state
} TriggerMacroVote;
typedef enum TriggerMacroEval {
TriggerMacroEval_Remove,
} TriggerMacroEval;
+typedef enum ResultMacroEval {
+ ResultMacroEval_DoNothing,
+ ResultMacroEval_Remove,
+} ResultMacroEval;
+
// ----- Variables -----
// Macro Module command dictionary
-char* macroCLIDictName = "Macro Module Commands";
-CLIDictItem macroCLIDict[] = {
+const char macroCLIDictName[] = "Macro Module Commands";
+const CLIDictItem macroCLIDict[] = {
{ "capList", "Prints an indexed list of all non USB keycode capabilities.", cliFunc_capList },
{ "capSelect", "Triggers the specified capabilities. First two args are state and stateType." NL "\t\t\033[35mK11\033[0m Keyboard Capability 0x0B", cliFunc_capSelect },
- { "keyPress", "Send key-presses to the macro module. Held until released. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyPress },
- { "keyRelease", "Release a key-press from the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyRelease },
+ { "keyHold", "Send key-hold events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyHold },
+ { "keyPress", "Send key-press events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyPress },
+ { "keyRelease", "Send key-release event to macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyRelease },
{ "layerList", "List available layers.", cliFunc_layerList },
{ "layerState", "Modify specified indexed layer state <layer> <state byte>." NL "\t\t\033[35mL2\033[0m Indexed Layer 0x02" NL "\t\t0 Off, 1 Shift, 2 Latch, 4 Lock States", cliFunc_layerState },
{ "macroDebug", "Disables/Enables sending USB keycodes to the Output Module and prints U/K codes.", cliFunc_macroDebug },
uint8_t macroPauseMode = 0;
// Macro step counter - If non-zero, the step counter counts down every time the macro module does one processing loop
-unsigned int macroStepCounter = 0;
+uint16_t macroStepCounter = 0;
// Key Trigger List Buffer
// TODO, figure out a good way to scale this array size without wasting too much memory, but not rejecting macros
// Possibly could be calculated by the KLL compiler
// XXX It may be possible to calculate the worst case using the KLL compiler
-unsigned int macroTriggerMacroPendingList[ TriggerMacroNum ] = { 0 };
-unsigned int macroTriggerMacroPendingListSize = 0;
+uint16_t macroTriggerMacroPendingList[ TriggerMacroNum ] = { 0 };
+uint16_t macroTriggerMacroPendingListSize = 0;
// Layer Index Stack
// * When modifying layer state and the state is non-0x0, the stack must be adjusted
-unsigned int macroLayerIndexStack[ LayerNum ] = { 0 };
-unsigned int macroLayerIndexStackSize = 0;
+uint16_t macroLayerIndexStack[ LayerNum + 1 ] = { 0 };
+uint16_t macroLayerIndexStackSize = 0;
// Pending Result Macro Index List
// * Any result macro that needs processing from a previous macro processing loop
-unsigned int macroResultMacroPendingList[ ResultMacroNum ] = { 0 };
-unsigned int macroResultMacroPendingListSize = 0;
+uint16_t macroResultMacroPendingList[ ResultMacroNum ] = { 0 };
+uint16_t macroResultMacroPendingListSize = 0;
+
+
+
+// ----- Capabilities -----
+
+// Sets the given layer with the specified layerState
+void Macro_layerState( uint8_t state, uint8_t stateType, uint16_t layer, uint8_t layerState )
+{
+ // Is layer in the LayerIndexStack?
+ uint8_t inLayerIndexStack = 0;
+ uint16_t stackItem = 0;
+ while ( stackItem < macroLayerIndexStackSize )
+ {
+ // Flag if layer is already in the LayerIndexStack
+ if ( macroLayerIndexStack[ stackItem ] == layer )
+ {
+ inLayerIndexStack = 1;
+ break;
+ }
+
+ // Increment to next item
+ stackItem++;
+ }
+
+ // Toggle Layer State Byte
+ if ( LayerIndex[ layer ].state & layerState )
+ {
+ // Unset
+ LayerIndex[ layer ].state &= ~layerState;
+ }
+ else
+ {
+ // Set
+ LayerIndex[ layer ].state |= layerState;
+ }
+
+ // If the layer was not in the LayerIndexStack add it
+ if ( !inLayerIndexStack )
+ {
+ macroLayerIndexStack[ macroLayerIndexStackSize++ ] = layer;
+ }
+
+ // If the layer is in the LayerIndexStack and the state is 0x00, remove
+ if ( LayerIndex[ layer ].state == 0x00 && inLayerIndexStack )
+ {
+ // Remove the layer from the LayerIndexStack
+ // Using the already positioned stackItem variable from the loop above
+ while ( stackItem < macroLayerIndexStackSize )
+ {
+ macroLayerIndexStack[ stackItem ] = macroLayerIndexStack[ stackItem + 1 ];
+ stackItem++;
+ }
+
+ // Reduce LayerIndexStack size
+ macroLayerIndexStackSize--;
+ }
+}
+
+// Modifies the specified Layer control byte
+// Argument #1: Layer Index -> uint16_t
+// Argument #2: Layer State -> uint8_t
+void Macro_layerState_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Macro_layerState(layerIndex,layerState)");
+ return;
+ }
+
+ // Only use capability on press or release
+ // TODO Analog
+ // XXX This may cause issues, might be better to implement state table here to decide -HaaTa
+ if ( stateType == 0x00 && state == 0x02 ) // Hold condition
+ return;
+
+ // Get layer index from arguments
+ // Cast pointer to uint8_t to uint16_t then access that memory location
+ uint16_t layer = *(uint16_t*)(&args[0]);
+
+ // Get layer toggle byte
+ uint8_t layerState = args[ sizeof(uint16_t) ];
+
+ Macro_layerState( state, stateType, layer, layerState );
+}
+
+
+// Latches given layer
+// Argument #1: Layer Index -> uint16_t
+void Macro_layerLatch_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Macro_layerLatch(layerIndex)");
+ return;
+ }
+
+ // Only use capability on press
+ // TODO Analog
+ // XXX To make sense, this code be on press or release. Or it could even be a sticky shift (why? dunno) -HaaTa
+ if ( stateType == 0x00 && state != 0x01 ) // All normal key conditions except press
+ return;
+
+ // Get layer index from arguments
+ // Cast pointer to uint8_t to uint16_t then access that memory location
+ uint16_t layer = *(uint16_t*)(&args[0]);
+
+ Macro_layerState( state, stateType, layer, 0x02 );
+}
+
+
+// Locks given layer
+// Argument #1: Layer Index -> uint16_t
+void Macro_layerLock_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Macro_layerLock(layerIndex)");
+ return;
+ }
+
+ // Only use capability on press
+ // TODO Analog
+ // XXX Could also be on release, but that's sorta dumb -HaaTa
+ if ( stateType == 0x00 && state != 0x01 ) // All normal key conditions except press
+ return;
+
+ // Get layer index from arguments
+ // Cast pointer to uint8_t to uint16_t then access that memory location
+ uint16_t layer = *(uint16_t*)(&args[0]);
+
+ Macro_layerState( state, stateType, layer, 0x04 );
+}
+
+
+// Shifts given layer
+// Argument #1: Layer Index -> uint16_t
+void Macro_layerShift_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Macro_layerShift(layerIndex)");
+ return;
+ }
+
+ // Only use capability on press or release
+ // TODO Analog
+ if ( stateType == 0x00 && ( state == 0x00 || state == 0x02 ) ) // Only pass press or release conditions
+ return;
+
+ // Get layer index from arguments
+ // Cast pointer to uint8_t to uint16_t then access that memory location
+ uint16_t layer = *(uint16_t*)(&args[0]);
+
+ Macro_layerState( state, stateType, layer, 0x01 );
+}
// Looks up the trigger list for the given scan code (from the active layer)
// NOTE: Calling function must handle the NULL pointer case
-unsigned int *Macro_layerLookup( uint8_t scanCode )
+nat_ptr_t *Macro_layerLookup( uint8_t scanCode )
{
// If no trigger macro is defined at the given layer, fallthrough to the next layer
- for ( unsigned int layer = 0; layer < macroLayerIndexStackSize; layer++ )
+ for ( uint16_t layerIndex = 0; layerIndex < macroLayerIndexStackSize; layerIndex++ )
{
- // Lookup layer
- unsigned int **map = LayerIndex[ macroLayerIndexStack[ layer ] ].triggerMap;
+ // Lookup Layer
+ Layer *layer = &LayerIndex[ macroLayerIndexStack[ layerIndex ] ];
+
+ // Check if latch has been pressed for this layer
+ // XXX Regardless of whether a key is found, the latch is removed on first lookup
+ uint8_t latch = layer->state & 0x02;
+ if ( latch )
+ {
+ layer->state &= ~0x02;
+ }
+
+ // Only use layer, if state is valid
+ // XOR each of the state bits
+ // If only two are enabled, do not use this state
+ if ( (layer->state & 0x01) ^ (latch>>1) ^ ((layer->state & 0x04)>>2) )
+ {
+ // Lookup layer
+ nat_ptr_t **map = (nat_ptr_t**)layer->triggerMap;
- // Determine if layer has key defined
- if ( map != 0 && *map[ scanCode ] != 0 )
- return map[ scanCode ];
+ // Determine if layer has key defined
+ if ( map != 0 && *map[ scanCode ] != 0 )
+ return map[ scanCode ];
+ }
}
// Do lookup on default layer
- unsigned int **map = LayerIndex[0].triggerMap;
+ nat_ptr_t **map = (nat_ptr_t**)LayerIndex[0].triggerMap;
// Determine if layer has key defined
if ( map == 0 && *map[ scanCode ] == 0 )
// Append result macro to pending list, checking for duplicates
// Do nothing if duplicate
-inline void Macro_appendResultMacroToPendingList( unsigned int resultMacroIndex )
+inline void Macro_appendResultMacroToPendingList( TriggerMacro *triggerMacro )
{
+ // Lookup result macro index
+ var_uint_t resultMacroIndex = triggerMacro->result;
+
// Iterate through result macro pending list, making sure this macro hasn't been added yet
- for ( unsigned int macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroResultMacroPendingListSize; macro++ )
{
// If duplicate found, do nothing
if ( macroResultMacroPendingList[ macro ] == resultMacroIndex )
// No duplicates found, add to pending list
macroResultMacroPendingList[ macroResultMacroPendingListSize++ ] = resultMacroIndex;
+
+ // Lookup scanCode of the last key in the last combo
+ var_uint_t pos = 0;
+ for ( uint8_t comboLength = triggerMacro->guide[0]; comboLength > 0; )
+ {
+ pos += TriggerGuideSize * comboLength + 1;
+ comboLength = triggerMacro->guide[ pos ];
+ }
+
+ uint8_t scanCode = ((TriggerGuide*)&triggerMacro->guide[ pos - TriggerGuideSize ])->scanCode;
+
+ // Lookup scanCode in buffer list for the current state and stateType
+ for ( uint8_t keyIndex = 0; keyIndex < macroTriggerListBufferSize; keyIndex++ )
+ {
+ if ( macroTriggerListBuffer[ keyIndex ].scanCode == scanCode )
+ {
+ ResultMacroList[ resultMacroIndex ].state = macroTriggerListBuffer[ keyIndex ].state;
+ ResultMacroList[ resultMacroIndex ].stateType = macroTriggerListBuffer[ keyIndex ].type;
+ }
+ }
+
+ // Reset the macro position
+ ResultMacroList[ resultMacroIndex ].pos = 0;
}
inline uint8_t Macro_isLongResultMacro( ResultMacro *macro )
{
// Check the second sequence combo length
- // If non-zero return 1 (long sequence)
+ // If non-zero return non-zero (long sequence)
+ // 0 otherwise (short sequence)
+ var_uint_t position = 1;
+ for ( var_uint_t result = 0; result < macro->guide[0]; result++ )
+ position += ResultGuideSize( (ResultGuide*)¯o->guide[ position ] );
+ return macro->guide[ position ];
+}
+
+
+// Determine if long TriggerMacro (more than 1 sequence element)
+inline uint8_t Macro_isLongTriggerMacro( TriggerMacro *macro )
+{
+ // Check the second sequence combo length
+ // If non-zero return non-zero (long sequence)
// 0 otherwise (short sequence)
- return macro->guide[ macro->guide[0] * ResultGuideSize( ((ResultGuide*)macro->guide) ) ] > 0 ? 1 : 0;
+ return macro->guide[ macro->guide[0] * TriggerGuideSize + 1 ];
+}
+
+
+// Votes on the given key vs. guide, short macros
+inline TriggerMacroVote Macro_evalShortTriggerMacroVote( TriggerGuide *key, TriggerGuide *guide )
+{
+ // Depending on key type
+ switch ( guide->type )
+ {
+ // Normal State Type
+ case 0x00:
+ // For short TriggerMacros completely ignore incorrect keys
+ if ( guide->scanCode == key->scanCode )
+ {
+ switch ( key->state )
+ {
+ // Correct key, pressed, possible passing
+ case 0x01:
+ return TriggerMacroVote_Pass;
+
+ // Correct key, held, possible passing or release
+ case 0x02:
+ return TriggerMacroVote_PassRelease;
+
+ // Correct key, released, possible release
+ case 0x03:
+ return TriggerMacroVote_Release;
+ }
+ }
+
+ return TriggerMacroVote_DoNothing;
+
+ // LED State Type
+ case 0x01:
+ erro_print("LED State Type - Not implemented...");
+ break;
+
+ // Analog State Type
+ case 0x02:
+ erro_print("Analog State Type - Not implemented...");
+ break;
+
+ // Invalid State Type
+ default:
+ erro_print("Invalid State Type. This is a bug.");
+ break;
+ }
+
+ // XXX Shouldn't reach here
+ return TriggerMacroVote_Invalid;
}
-// Votes on the given key vs. guide
-inline TriggerMacroVote Macro_evalTriggerMacroVote( TriggerGuide *key, TriggerGuide *guide )
+// Votes on the given key vs. guide, long macros
+// A long macro is defined as a guide with more than 1 combo
+inline TriggerMacroVote Macro_evalLongTriggerMacroVote( TriggerGuide *key, TriggerGuide *guide )
{
// Depending on key type
switch ( guide->type )
case 0x01:
return TriggerMacroVote_Fail;
- // Wrong key, held or released, do not pass (no effect)
+ // Wrong key, held, do not pass (no effect)
case 0x02:
- case 0x03:
return TriggerMacroVote_DoNothing;
+
+ // Wrong key released, fail out if pos == 0
+ case 0x03:
+ return TriggerMacroVote_DoNothing | TriggerMacroVote_DoNothingRelease;
}
}
// Evaluate/Update TriggerMacro
-inline TriggerMacroEval Macro_evalTriggerMacro( unsigned int triggerMacroIndex )
+inline TriggerMacroEval Macro_evalTriggerMacro( var_uint_t triggerMacroIndex )
{
// Lookup TriggerMacro
TriggerMacro *macro = &TriggerMacroList[ triggerMacroIndex ];
if ( macro->state == TriggerMacro_Release )
{
macro->state = TriggerMacro_Waiting;
- macro->pos = macro->pos + macro->guide[ macro->pos ] * TriggerGuideSize;
+ macro->pos = macro->pos + macro->guide[ macro->pos ] * TriggerGuideSize + 1;
}
// Current Macro position
- unsigned int pos = macro->pos;
+ var_uint_t pos = macro->pos;
// Length of the combo being processed
- uint8_t comboLength = macro->guide[ pos ];
+ uint8_t comboLength = macro->guide[ pos ] * TriggerGuideSize;
// If no combo items are left, remove the TriggerMacro from the pending list
if ( comboLength == 0 )
return TriggerMacroEval_Remove;
}
- // Iterate through the key buffer, comparing to each key in the combo
+ // Check if this is a long Trigger Macro
+ uint8_t longMacro = Macro_isLongTriggerMacro( macro );
+
+ // Iterate through the items in the combo, voting the on the key state
// If any of the pressed keys do not match, fail the macro
//
// The macro is waiting for input when in the TriggerMacro_Waiting state
// TODO Add support for 0x00 Key state (not pressing a key, not all that useful in general)
// TODO Add support for Press/Hold/Release differentiation when evaluating (not sure if useful)
TriggerMacroVote overallVote = TriggerMacroVote_Invalid;
- for ( uint8_t key = 0; key < macroTriggerListBufferSize; key++ )
+ for ( uint8_t comboItem = pos + 1; comboItem < pos + comboLength + 1; comboItem += TriggerGuideSize )
{
- // Lookup key information
- TriggerGuide *keyInfo = ¯oTriggerListBuffer[ key ];
+ // Assign TriggerGuide element (key type, state and scancode)
+ TriggerGuide *guide = (TriggerGuide*)(¯o->guide[ comboItem ]);
- // Iterate through the items in the combo, voting the on the key state
TriggerMacroVote vote = TriggerMacroVote_Invalid;
- for ( uint8_t comboItem = pos + 1; comboItem < pos + comboLength + 1; comboItem += TriggerGuideSize )
+ // Iterate through the key buffer, comparing to each key in the combo
+ for ( uint8_t key = 0; key < macroTriggerListBufferSize; key++ )
{
- // Assign TriggerGuide element (key type, state and scancode)
- TriggerGuide *guide = (TriggerGuide*)(¯o->guide[ comboItem ]);
+ // Lookup key information
+ TriggerGuide *keyInfo = ¯oTriggerListBuffer[ key ];
// If vote is a pass (>= 0x08, no more keys in the combo need to be looked at)
// Also mask all of the non-passing votes
- vote |= Macro_evalTriggerMacroVote( keyInfo, guide );
+ vote |= longMacro
+ ? Macro_evalLongTriggerMacroVote( keyInfo, guide )
+ : Macro_evalShortTriggerMacroVote( keyInfo, guide );
if ( vote >= TriggerMacroVote_Pass )
{
vote &= TriggerMacroVote_Release | TriggerMacroVote_PassRelease | TriggerMacroVote_Pass;
}
}
+ // If no pass vote was found after scanning all of the keys
+ // Fail the combo, if this is a short macro (long macros already will have a fail vote)
+ if ( !longMacro && vote < TriggerMacroVote_Pass )
+ vote |= TriggerMacroVote_Fail;
+
// After voting, append to overall vote
overallVote |= vote;
}
+ // If no pass vote was found after scanning the entire combo
+ // And this is the first position in the combo, just remove it (nothing important happened)
+ if ( longMacro && overallVote & TriggerMacroVote_DoNothingRelease && pos == 0 )
+ overallVote |= TriggerMacroVote_Fail;
+
// Decide new state of macro after voting
// Fail macro, remove from pending list
if ( overallVote & TriggerMacroVote_Fail )
return TriggerMacroEval_Remove;
}
// Do nothing, incorrect key is being held or released
- else if ( overallVote & TriggerMacroVote_DoNothing )
+ else if ( overallVote & TriggerMacroVote_DoNothing && longMacro )
{
// Just doing nothing :)
}
// If passing and in Waiting state, set macro state to Press
- else if ( overallVote & TriggerMacroVote_Pass && macro->state == TriggerMacro_Waiting )
+ else if ( overallVote & TriggerMacroVote_Pass
+ && ( macro->state == TriggerMacro_Waiting || macro->state == TriggerMacro_Press ) )
{
macro->state = TriggerMacro_Press;
// If in press state, and this is the final combo, send request for ResultMacro
// Check to see if the result macro only has a single element
// If this result macro has more than 1 key, only send once
- // TODO Add option to have macro repeat rate
- if ( macro->guide[ pos + comboLength ] == 0 )
+ // TODO Add option to have long macro repeat rate
+ if ( macro->guide[ pos + comboLength + 1 ] == 0 )
{
- // Long Macro, only send once (more than 1 sequence item)
- // Short Macro (only 1 sequence item)
- return Macro_isLongResultMacro( &ResultMacroList[ macro->result ] )
- ? TriggerMacroEval_DoResult
- : TriggerMacroEval_DoResultAndRemove;
+ // Long result macro (more than 1 combo)
+ if ( Macro_isLongResultMacro( &ResultMacroList[ macro->result ] ) )
+ {
+ // Only ever trigger result once, on press
+ if ( overallVote == TriggerMacroVote_Pass )
+ {
+ return TriggerMacroEval_DoResultAndRemove;
+ }
+ }
+ // Short result macro
+ else
+ {
+ // Only trigger result once, on press, if long trigger (more than 1 combo)
+ if ( Macro_isLongTriggerMacro( macro ) )
+ {
+ return TriggerMacroEval_DoResultAndRemove;
+ }
+ // Otherwise, trigger result continuously
+ else
+ {
+ return TriggerMacroEval_DoResult;
+ }
+ }
}
-
}
// If ready for transition and in Press state, set to Waiting and increment combo position
// Position is incremented (and possibly remove the macro from the pending list) on the next iteration
else if ( overallVote & TriggerMacroVote_Release && macro->state == TriggerMacro_Press )
{
macro->state = TriggerMacro_Release;
+
+ // If this is the last combo in the sequence, remove from the pending list
+ if ( macro->guide[ macro->pos + macro->guide[ macro->pos ] * TriggerGuideSize + 1 ] == 0 )
+ return TriggerMacroEval_Remove;
+ }
+ // Otherwise, just remove the macro on key release
+ // One more result has to be called to indicate to the ResultMacro that the key transitioned to the release state
+ else if ( overallVote & TriggerMacroVote_Release )
+ {
+ return TriggerMacroEval_DoResultAndRemove;
}
+ // If this is a short macro, just remove it
+ // The state can be rebuilt on the next iteration
+ if ( !longMacro )
+ return TriggerMacroEval_Remove;
+
return TriggerMacroEval_DoNothing;
}
// Evaluate/Update ResultMacro
-void Macro_evalResultMacro( unsigned int resultMacroIndex )
+inline ResultMacroEval Macro_evalResultMacro( var_uint_t resultMacroIndex )
{
- // TODO
+ // Lookup ResultMacro
+ ResultMacro *macro = &ResultMacroList[ resultMacroIndex ];
+
+ // Current Macro position
+ var_uint_t pos = macro->pos;
+
+ // Length of combo being processed
+ uint8_t comboLength = macro->guide[ pos ];
+
+ // Function Counter, used to keep track of the combo items processed
+ var_uint_t funcCount = 0;
+
+ // Combo Item Position within the guide
+ var_uint_t comboItem = pos + 1;
+
+ // Iterate through the Result Combo
+ while ( funcCount < comboLength )
+ {
+ // Assign TriggerGuide element (key type, state and scancode)
+ ResultGuide *guide = (ResultGuide*)(¯o->guide[ comboItem ]);
+
+ // Do lookup on capability function
+ void (*capability)(uint8_t, uint8_t, uint8_t*) = (void(*)(uint8_t, uint8_t, uint8_t*))(CapabilitiesList[ guide->index ].func);
+
+ // Call capability
+ capability( macro->state, macro->stateType, &guide->args );
+
+ // Increment counters
+ funcCount++;
+ comboItem += ResultGuideSize( (ResultGuide*)(¯o->guide[ comboItem ]) );
+ }
+
+ // Move to next item in the sequence
+ macro->pos = comboItem;
+
+ // If the ResultMacro is finished, remove
+ if ( macro->guide[ comboItem ] == 0 )
+ {
+ return ResultMacroEval_Remove;
+ }
+
+ // Otherwise leave the macro in the list
+ return ResultMacroEval_DoNothing;
}
// Update pending trigger list
-void Macro_updateTriggerMacroPendingList()
+inline void Macro_updateTriggerMacroPendingList()
{
// Iterate over the macroTriggerListBuffer to add any new Trigger Macros to the pending list
for ( uint8_t key = 0; key < macroTriggerListBufferSize; key++ )
{
+ // TODO LED States
+ // TODO Analog Switches
+ // Only add TriggerMacro to pending list if key was pressed (not held, released or off)
+ if ( macroTriggerListBuffer[ key ].state == 0x00 && macroTriggerListBuffer[ key ].state != 0x01 )
+ continue;
+
// Lookup Trigger List
- unsigned int *triggerList = Macro_layerLookup( macroTriggerListBuffer[ key ].scanCode );
+ nat_ptr_t *triggerList = Macro_layerLookup( macroTriggerListBuffer[ key ].scanCode );
// Number of Triggers in list
- unsigned int triggerListSize = triggerList[0];
+ nat_ptr_t triggerListSize = triggerList[0];
// Iterate over triggerList to see if any TriggerMacros need to be added
// First item is the number of items in the TriggerList
- for ( unsigned int macro = 1; macro < triggerListSize + 1; macro++ )
+ for ( var_uint_t macro = 1; macro < triggerListSize + 1; macro++ )
{
// Lookup trigger macro index
- unsigned int triggerMacroIndex = triggerList[ macro ];
+ var_uint_t triggerMacroIndex = triggerList[ macro ];
// Iterate over macroTriggerMacroPendingList to see if any macro in the scancode's
// triggerList needs to be added
- unsigned int pending = 0;
+ var_uint_t pending = 0;
for ( ; pending < macroTriggerMacroPendingListSize; pending++ )
{
// Stop scanning if the trigger macro index is found in the pending list
if ( pending == macroTriggerMacroPendingListSize )
{
macroTriggerMacroPendingList[ macroTriggerMacroPendingListSize++ ] = triggerMacroIndex;
+
+ // Reset macro position
+ TriggerMacroList[ triggerMacroIndex ].pos = 0;
+ TriggerMacroList[ triggerMacroIndex ].state = TriggerMacro_Waiting;
}
}
}
// Proceed, decrementing the step counter
macroStepCounter--;
+ dbug_print("Macro Step");
}
// Update pending trigger list, before processing TriggerMacros
// Tail pointer for macroTriggerMacroPendingList
// Macros must be explicitly re-added
- unsigned int macroTriggerMacroPendingListTail = 0;
+ var_uint_t macroTriggerMacroPendingListTail = 0;
// Iterate through the pending TriggerMacros, processing each of them
- for ( unsigned int macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
+ for ( var_uint_t macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
{
switch ( Macro_evalTriggerMacro( macroTriggerMacroPendingList[ macro ] ) )
{
// Trigger Result Macro (purposely falling through)
case TriggerMacroEval_DoResult:
// Append ResultMacro to PendingList
- Macro_appendResultMacroToPendingList( TriggerMacroList[ macroTriggerMacroPendingList[ macro ] ].result );
+ Macro_appendResultMacroToPendingList( &TriggerMacroList[ macroTriggerMacroPendingList[ macro ] ] );
- // Otherwise, just re-add
default:
macroTriggerMacroPendingList[ macroTriggerMacroPendingListTail++ ] = macroTriggerMacroPendingList[ macro ];
break;
// Trigger Result Macro and Remove (purposely falling through)
case TriggerMacroEval_DoResultAndRemove:
// Append ResultMacro to PendingList
- Macro_appendResultMacroToPendingList( TriggerMacroList[ macroTriggerMacroPendingList[ macro ] ].result );
+ Macro_appendResultMacroToPendingList( &TriggerMacroList[ macroTriggerMacroPendingList[ macro ] ] );
// Remove Macro from Pending List, nothing to do, removing by default
case TriggerMacroEval_Remove:
}
}
- // Update the macroResultMacroPendingListSize with the tail pointer
+ // Update the macroTriggerMacroPendingListSize with the tail pointer
macroTriggerMacroPendingListSize = macroTriggerMacroPendingListTail;
- // Iterate through the pending ResultMacros, processing each of them
- for ( unsigned int macro = 0; macro < macroResultMacroPendingListSize; macro++ )
- {
- Macro_evalResultMacro( macroResultMacroPendingList[ macro ] );
- }
- /* TODO
- // Loop through input buffer
- for ( uint8_t index = 0; index < KeyIndex_BufferUsed && !macroDebugMode; index++ )
- {
- // Get the keycode from the buffer
- uint8_t key = KeyIndex_Buffer[index];
+ // Tail pointer for macroResultMacroPendingList
+ // Macros must be explicitly re-added
+ var_uint_t macroResultMacroPendingListTail = 0;
- // Set the modifier bit if this key is a modifier
- if ( (key & KEY_LCTRL) == KEY_LCTRL ) // AND with 0xE0
+ // Iterate through the pending ResultMacros, processing each of them
+ for ( var_uint_t macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ {
+ switch ( Macro_evalResultMacro( macroResultMacroPendingList[ macro ] ) )
{
- USBKeys_Modifiers |= 1 << (key ^ KEY_LCTRL); // Left shift 1 by key XOR 0xE0
-
- // Modifier processed, move on to the next key
- continue;
- }
+ // Re-add macros to pending list
+ case ResultMacroEval_DoNothing:
+ default:
+ macroResultMacroPendingList[ macroResultMacroPendingListTail++ ] = macroResultMacroPendingList[ macro ];
+ break;
- // Too many keys
- if ( USBKeys_Sent >= USBKeys_MaxSize )
- {
- warn_msg("USB Key limit reached");
- errorLED( 1 );
+ // Remove Macro from Pending List, nothing to do, removing by default
+ case ResultMacroEval_Remove:
break;
}
-
- USBKeys_Array[USBKeys_Sent++] = key;
}
- */
- // Signal buffer that we've used it TODO
- Scan_finishedWithMacro( 0 );
- //Scan_finishedWithBuffer( KeyIndex_BufferUsed );
+ // Update the macroResultMacroPendingListSize with the tail pointer
+ macroResultMacroPendingListSize = macroResultMacroPendingListTail;
+
+ // Signal buffer that we've used it
+ Scan_finishedWithMacro( macroTriggerListBufferSize );
+
+ // Reset TriggerList buffer
+ macroTriggerListBufferSize = 0;
// If Macro debug mode is set, clear the USB Buffer
if ( macroDebugMode )
macroTriggerListBufferSize = 0;
// Initialize TriggerMacro states
- for ( unsigned int macro = 0; macro < TriggerMacroNum; macro++ )
+ for ( var_uint_t macro = 0; macro < TriggerMacroNum; macro++ )
{
- TriggerMacroList[ macro ].result = 0;
- TriggerMacroList[ macro ].pos = 0;
- TriggerMacroList[ macro ].state = TriggerMacro_Waiting;
+ TriggerMacroList[ macro ].pos = 0;
+ TriggerMacroList[ macro ].state = TriggerMacro_Waiting;
}
// Initialize ResultMacro states
- for ( unsigned int macro = 0; macro < ResultMacroNum; macro++ )
+ for ( var_uint_t macro = 0; macro < ResultMacroNum; macro++ )
{
ResultMacroList[ macro ].pos = 0;
ResultMacroList[ macro ].state = 0;
{
print( NL );
info_msg("Capabilities List");
+ printHex( CapabilitiesNum );
// Iterate through all of the capabilities and display them
- for ( unsigned int cap = 0; cap < CapabilitiesNum; cap++ )
+ for ( var_uint_t cap = 0; cap < CapabilitiesNum; cap++ )
{
print( NL "\t" );
printHex( cap );
char* arg2Ptr = args;
// Total number of args to scan (must do a lookup if a keyboard capability is selected)
- unsigned int totalArgs = 2; // Always at least two args
- unsigned int cap = 0;
+ var_uint_t totalArgs = 2; // Always at least two args
+ var_uint_t cap = 0;
// Arguments used for keyboard capability function
- unsigned int argSetCount = 0;
+ var_uint_t argSetCount = 0;
uint8_t *argSet = (uint8_t*)args;
// Process all args
- for ( unsigned int c = 0; argSetCount < totalArgs; c++ )
+ for ( var_uint_t c = 0; argSetCount < totalArgs; c++ )
{
curArgs = arg2Ptr;
CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
// Keyboard Capability
case 'K':
// Determine capability index
- cap = decToInt( &arg1Ptr[1] );
+ cap = numToInt( &arg1Ptr[1] );
// Lookup the number of args
totalArgs += CapabilitiesList[ cap ].argCount;
// Because allocating memory isn't doable, and the argument count is arbitrary
// The argument pointer is repurposed as the argument list (much smaller anyways)
- argSet[ argSetCount++ ] = (uint8_t)decToInt( arg1Ptr );
+ argSet[ argSetCount++ ] = (uint8_t)numToInt( arg1Ptr );
// Once all the arguments are prepared, call the keyboard capability function
if ( argSetCount == totalArgs )
}
}
+void cliFunc_keyHold( char* args )
+{
+ // Parse codes from arguments
+ char* curArgs;
+ char* arg1Ptr;
+ char* arg2Ptr = args;
+
+ // Process all args
+ for ( ;; )
+ {
+ curArgs = arg2Ptr;
+ CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
+
+ // Stop processing args if no more are found
+ if ( *arg1Ptr == '\0' )
+ break;
+
+ // Ignore non-Scancode numbers
+ switch ( arg1Ptr[0] )
+ {
+ // Scancode
+ case 'S':
+ Macro_keyState( (uint8_t)numToInt( &arg1Ptr[1] ), 0x02 ); // Hold scancode
+ break;
+ }
+ }
+}
+
void cliFunc_keyPress( char* args )
{
// Parse codes from arguments
{
// Scancode
case 'S':
- Macro_keyState( (uint8_t)decToInt( &arg1Ptr[1] ), 0x01 ); // Press scancode
+ Macro_keyState( (uint8_t)numToInt( &arg1Ptr[1] ), 0x01 ); // Press scancode
break;
}
}
{
// Scancode
case 'S':
- Macro_keyState( (uint8_t)decToInt( &arg1Ptr[1] ), 0x03 ); // Release scancode
+ Macro_keyState( (uint8_t)numToInt( &arg1Ptr[1] ), 0x03 ); // Release scancode
break;
}
}
info_msg("Layer List");
// Iterate through all of the layers and display them
- for ( unsigned int layer = 0; layer < LayerNum; layer++ )
+ for ( uint16_t layer = 0; layer < LayerNum; layer++ )
{
print( NL "\t" );
printHex( layer );
print(" - ");
// Display layer name
- dPrint( LayerIndex[ layer ].name );
+ dPrint( (char*)LayerIndex[ layer ].name );
// Default map
if ( layer == 0 )
if ( arg1Ptr[0] != 'L' )
return;
- arg1 = (uint8_t)decToInt( &arg1Ptr[1] );
+ arg1 = (uint8_t)numToInt( &arg1Ptr[1] );
break;
// Second argument (e.g. 4)
case 1:
- arg2 = (uint8_t)decToInt( arg1Ptr );
+ arg2 = (uint8_t)numToInt( arg1Ptr );
// Display operation (to indicate that it worked)
print( NL );
void cliFunc_macroList( char* args )
{
+ // Show pending key events
+ print( NL );
+ info_msg("Pending Key Events: ");
+ printInt16( (uint16_t)macroTriggerListBufferSize );
+ print(" : ");
+ for ( uint8_t key = 0; key < macroTriggerListBufferSize; key++ )
+ {
+ printHex( macroTriggerListBuffer[ key ].scanCode );
+ print(" ");
+ }
+
+ // Show pending trigger macros
+ print( NL );
+ info_msg("Pending Trigger Macros: ");
+ printInt16( (uint16_t)macroTriggerMacroPendingListSize );
+ print(" : ");
+ for ( var_uint_t macro = 0; macro < macroTriggerMacroPendingListSize; macro++ )
+ {
+ printHex( macroTriggerMacroPendingList[ macro ] );
+ print(" ");
+ }
+
+ // Show pending result macros
+ print( NL );
+ info_msg("Pending Result Macros: ");
+ printInt16( (uint16_t)macroResultMacroPendingListSize );
+ print(" : ");
+ for ( var_uint_t macro = 0; macro < macroResultMacroPendingListSize; macro++ )
+ {
+ printHex( macroResultMacroPendingList[ macro ] );
+ print(" ");
+ }
+
// Show available trigger macro indices
print( NL );
info_msg("Trigger Macros Range: T0 -> T");
// Show Trigger to Result Macro Links
print( NL );
info_msg("Trigger : Result Macro Pairs");
- for ( unsigned int macro = 0; macro < TriggerMacroNum; macro++ )
+ for ( var_uint_t macro = 0; macro < TriggerMacroNum; macro++ )
{
print( NL );
print("\tT");
printInt8( macroPauseMode );
}
-void macroDebugShowTrigger( unsigned int index )
+void macroDebugShowTrigger( var_uint_t index )
{
// Only proceed if the macro exists
if ( index >= TriggerMacroNum )
print( NL );
// Read the comboLength for combo in the sequence (sequence of combos)
- unsigned int pos = 0;
+ var_uint_t pos = 0;
uint8_t comboLength = macro->guide[ pos ];
// Iterate through and interpret the guide
while ( comboLength != 0 )
{
// Initial position of the combo
- unsigned int comboPos = ++pos;
+ var_uint_t comboPos = ++pos;
// Iterate through the combo
while ( pos < comboLength * TriggerGuideSize + comboPos )
// Display result macro index
print( NL "Result Macro Index: " );
printInt16( (uint16_t)macro->result ); // Hopefully large enough :P (can't assume 32-bit)
+
+ // Display trigger macro state
+ print( NL "Trigger Macro State: " );
+ switch ( macro->state )
+ {
+ case TriggerMacro_Press: print("Press"); break;
+ case TriggerMacro_Release: print("Release"); break;
+ case TriggerMacro_Waiting: print("Waiting"); break;
+ }
}
-void macroDebugShowResult( unsigned int index )
+void macroDebugShowResult( var_uint_t index )
{
// Only proceed if the macro exists
if ( index >= ResultMacroNum )
print( NL );
// Read the comboLength for combo in the sequence (sequence of combos)
- unsigned int pos = 0;
+ var_uint_t pos = 0;
uint8_t comboLength = macro->guide[ pos++ ];
// Iterate through and interpret the guide
while ( comboLength != 0 )
{
// Function Counter, used to keep track of the combos processed
- unsigned int funcCount = 0;
+ var_uint_t funcCount = 0;
// Iterate through the combo
while ( funcCount < comboLength )
print("|");
// Display Function Ptr Address
- printHex( (unsigned int)CapabilitiesList[ guide->index ].func );
+ printHex( (nat_ptr_t)CapabilitiesList[ guide->index ].func );
print("|");
// Display/Lookup Capability Name (utilize debug mode of capability)
// Display Argument(s)
print("(");
- for ( unsigned int arg = 0; arg < CapabilitiesList[ guide->index ].argCount; arg++ )
+ for ( var_uint_t arg = 0; arg < CapabilitiesList[ guide->index ].argCount; arg++ )
{
// Arguments are only 8 bit values
printHex( (&guide->args)[ arg ] );
{
// Indexed Trigger Macro
case 'T':
- macroDebugShowTrigger( decToInt( &arg1Ptr[1] ) );
+ macroDebugShowTrigger( numToInt( &arg1Ptr[1] ) );
break;
// Indexed Result Macro
case 'R':
- macroDebugShowResult( decToInt( &arg1Ptr[1] ) );
+ macroDebugShowResult( numToInt( &arg1Ptr[1] ) );
break;
}
}
char* arg2Ptr;
CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
+ // Default to 1, if no argument given
+ var_uint_t count = (var_uint_t)numToInt( arg1Ptr );
+
+ if ( count == 0 )
+ count = 1;
+
// Set the macro step counter, negative int's are cast to uint
- macroStepCounter = (unsigned int)decToInt( arg1Ptr );
+ macroStepCounter = count;
}