Updated License Clarification (markdown)

[qmk_firmware.git] / FAQ.md

diff --git a/FAQ.md b/FAQ.md
index 834822e1e8c618e4937edc0901181ef3677f7ba3..417efad48abe76cb861c6b7fd10c1c0aa7714b77 100644 (file)
--- a/FAQ.md
+++ b/FAQ.md
@@ -72,8 +72,8 @@ Without reset circuit you will have inconsistent reuslt due to improper initiali
 - http://www.mikrocontroller.net/attachment/52583/tpm754.pdf\r
 \r
 \r
-## Can't read comlumn of matrix beyond 16 \r
-Use `1UL<<16` intead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16.\r
+## Can't read column of matrix beyond 16 \r
+Use `1UL<<16` instead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16.\r
 \r
 In C `1` means one of **int** type which is **16bit** in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use **unsigned long** type with `1UL`.\r
 \r
@@ -118,7 +118,7 @@ Properly configure bootloader size in **Makefile**. With wrong section size boot
 #   Arduino Caterina(ATmega32U4)   4096             \r
 #   USBaspLoader(ATmega***)        2048             \r
 #   Teensy   halfKay(ATmega32U4)   512              \r
-#   Teensy++ halfKay(AT90USB128)   1024\r
+#   Teensy++ halfKay(AT90USB128)   2048\r
 OPT_DEFS += -DBOOTLOADER_SIZE=4096\r
 ```\r
 AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.\r
@@ -134,7 +134,7 @@ byte     Atmel/LUFA(ATMega32u4)          byte     Atmel(AT90SUB1286)
          |               |                        |               | \r
          =               =                        =               =\r
          |               | 32KB-4KB               |               | 128KB-8KB\r
-0x6000   +---------------+               0x1FC00  +---------------+\r
+0x6000   +---------------+               0x1E000  +---------------+\r
          |  Bootloader   | 4KB                    |  Bootloader   | 8KB\r
 0x7FFF   +---------------+               0x1FFFF  +---------------+\r
 \r
@@ -146,9 +146,9 @@ byte     Teensy(ATMega32u4)              byte     Teensy++(AT90SUB1286)
          |  Application  |                        |  Application  |\r
          |               |                        |               |\r
          =               =                        =               =\r
-         |               | 32KB-512B              |               | 128KB-1KB\r
+         |               | 32KB-512B              |               | 128KB-2KB\r
 0x7E00   +---------------+               0x1FC00  +---------------+\r
-         |  Bootloader   | 512B                   |  Bootloader   | 1KB\r
+         |  Bootloader   | 512B                   |  Bootloader   | 2KB\r
 0x7FFF   +---------------+               0x1FFFF  +---------------+\r
 ```\r
 \r
@@ -218,5 +218,21 @@ I heard some people have a problem with USB 3 port, try USB 2 port.
 \r
 \r
 ## Mac compatibility\r
-- OS X 10.11 and Hub: https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034\r
-https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
\ No newline at end of file
+### OS X 10.11 and Hub\r
+https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034\r
+\r
+\r
+## Problem on BIOS(UEFI)/Resume(Sleep&Wake)/Power cycles\r
+Some people reported their keyboard stops working on BIOS and/or after resume(power cycles).\r
+\r
+As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others. \r
+\r
+https://github.com/tmk/tmk_keyboard/issues/266\r
+https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778\r
+\r
+\r
+\r
+## FLIP doesn't work\r
+### AtLibUsbDfu.dll not found\r
+Remove current driver and reinstall one FLIP provides from DeviceManager.\r
+http://imgur.com/a/bnwzy
\ No newline at end of file