Check if you can't get this 'Listening:' message:\r
- build with `CONSOLE_ENABLE=yes` in **Makefile**.\r
\r
+You may need privilege to access the device on OS like Linux.\r
+- try `sudo hid_listen`\r
+\r
## Can't get message on console\r
Check:\r
- *hid_listen* finds your device. See above.\r
- Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).\r
-- set `debug_enable=yes` usually in `matrix_init()` in **matrix.c**.\r
+- set `debug_enable=true` usually in `matrix_init()` in **matrix.c**.\r
- try using 'print' function instead of debug print. See **common/print.h**.\r
- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).\r
\r
- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf\r
\r
\r
-## Can't read comlumn of matrix beyond 16 \r
-Use `1UL<<16` intead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16.\r
+## Can't read column of matrix beyond 16 \r
+Use `1UL<<16` instead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16.\r
\r
In C `1` means one of **int** type which is **16bit** in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use **unsigned long** type with `1UL`.\r
\r
# Arduino Caterina(ATmega32U4) 4096 \r
# USBaspLoader(ATmega***) 2048 \r
# Teensy halfKay(ATmega32U4) 512 \r
-# Teensy++ halfKay(AT90USB128) 1024\r
+# Teensy++ halfKay(AT90USB128) 2048\r
OPT_DEFS += -DBOOTLOADER_SIZE=4096\r
```\r
AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.\r
| | | | \r
= = = =\r
| | 32KB-4KB | | 128KB-8KB\r
-0x6000 +---------------+ 0x1FC00 +---------------+\r
+0x6000 +---------------+ 0x1E000 +---------------+\r
| Bootloader | 4KB | Bootloader | 8KB\r
0x7FFF +---------------+ 0x1FFFF +---------------+\r
\r
| Application | | Application |\r
| | | |\r
= = = =\r
- | | 32KB-512B | | 128KB-1KB\r
+ | | 32KB-512B | | 128KB-2KB\r
0x7E00 +---------------+ 0x1FC00 +---------------+\r
- | Bootloader | 512B | Bootloader | 1KB\r
+ | Bootloader | 512B | Bootloader | 2KB\r
0x7FFF +---------------+ 0x1FFFF +---------------+\r
```\r
\r
Device name will vary depending on your system.\r
\r
http://arduino.cc/en/Main/ArduinoBoardMicro\r
-https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
\ No newline at end of file
+https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867\r
+\r
+\r
+## USB 3 compatibility\r
+I heard some people have a problem with USB 3 port, try USB 2 port.\r
+\r
+\r
+## Mac compatibility\r
+### OS X 10.11 and Hub\r
+https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034\r
+\r
+\r
+## Problem on BIOS(UEFI)/Resume(Sleep&Wake)/Power cycles\r
+Some people reported their keyboard stops working on BIOS and/or after resume(power cycles).\r
+\r
+As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others. \r
+\r
+https://github.com/tmk/tmk_keyboard/issues/266\r
+https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778\r
+\r
+\r
+\r
+## FLIP doesn't work\r
+### AtLibUsbDfu.dll not found\r
+Remove current driver and reinstall one FLIP provides from DeviceManager.\r
+http://imgur.com/a/bnwzy
\ No newline at end of file