###| CMAKE Kiibohd Controller |###
#
-# Jacob Alexander 2011-2013
+# Jacob Alexander 2011-2014
# Due to this file's usefulness:
#
# Released into the Public Domain
#
###
-#| Windows / Cygwin Compatibility options
-set( CMAKE_LEGACY_CYGWIN_WIN32 0 )
-set( CMAKE_USE_RELATIVE_PATHS 1 )
-
-#| Add Dependency Macro
-include( AddFileDependencies )
-
###
-# Compiler Family
+# Chip Selection
#
-#| Specify the compiler family to use
-#| Currently only supports AVR and ARM
-#| "avr" # Teensy 1.0
-#| "avr" # Teensy 2.0
-#| "avr" # Teensy++ 1.0
-#| "avr" # Teensy++ 2.0
-#| "arm" # Teensy 3.0
-#set( COMPILER_FAMILY "arm" )
-set( COMPILER_FAMILY "avr" )
-
-message( STATUS "Compiler Family:" )
-message( "${COMPILER_FAMILY}" )
-
-
-
-#| Load the compiler family specific configurations
-include( ${COMPILER_FAMILY}.cmake )
+#| You _MUST_ set this to match the microcontroller you are trying to compile for
+#| You _MUST_ clean the build directory if you change this value
+#|
+set( CHIP
+# "at90usb162" # Teensy 1.0 (avr)
+# "atmega32u4" # Teensy 2.0 (avr)
+# "at90usb646" # Teensy++ 1.0 (avr)
+# "at90usb1286" # Teensy++ 2.0 (avr)
+# "mk20dx128" # Teensy 3.0 (arm)
+ "mk20dx128vlf5" # McHCK mk20dx128vlf5
+# "mk20dx256" # Teensy 3.1 (arm)
+)
###
-# Project Description
+# Compiler Intialization
#
-
-#| Project
-project( kiibohd_controller )
-
-#| Target Name (output name)
-set( TARGET kiibohd )
-
-#| General Settings
-cmake_minimum_required( VERSION 2.8 )
+set ( CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_SOURCE_DIR}/Lib/CMake )
+include( initialize )
###
-# Source Defines
+# Project Modules
#
-#| Sources (see setup.h for configuring in/away code blocks or other complete modules)
-#| XXX Not set here in this project, see setup.cmake
-#set( SRCS ./main.c )
+#| Note: This is the only section you probably want to modify
+#| Each module is defined by it's own folder (e.g. Scan/Matrix represents the "Matrix" module)
+#| All of the modules must be specified, as they generate the sources list of files to compile
+#| Any modifications to this file will cause a complete rebuild of the project
-#| Instead, include the module source selector
-include( setup.cmake )
-set( SRCS
- main.c
- ${COMPILER_SRCS}
- ${SCAN_SRCS}
- ${MACRO_SRCS}
- ${USB_SRCS}
- ${DEBUG_SRCS}
-)
+#| Please look at the {Scan,Macro,Output,Debug} for information on the modules and how to create new ones
-#| Directories to include by default
-include_directories( ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR} )
+##| Deals with acquiring the keypress information and turning it into a key index
+set( ScanModule "MD1" )
+##| Provides the mapping functions for DefaultMap and handles any macro processing before sending to the OutputModule
+set( MacroModule "PartialMap" )
+##| Sends the current list of usb key codes through USB HID
+set( OutputModule "pjrcUSB" )
-###
-# Module Compatibility Check
-#
-
-#| Check for whether the set modules are compatible with the specified compiler family
-ModuleCompatibility( ${ScanModulePath} ${ScanModuleCompatibility} )
-ModuleCompatibility( ${MacroModulePath} ${MacroModuleCompatibility} )
-ModuleCompatibility( ${USBModulePath} ${USBModuleCompatibility} )
-ModuleCompatibility( ${DebugModulePath} ${DebugModuleCompatibility} )
+##| Debugging source to use, each module has it's own set of defines that it sets
+set( DebugModule "full" )
###
-# Build Targets
+# Keymap Configuration (XXX - Not worky yet, currently ignored)
#
-#| Create the .ELF file
-set( TARGET_ELF ${TARGET}.elf )
-add_executable( ${TARGET_ELF} ${SRCS} )
-
-
-#| .ELF Properties
-set_target_properties( ${TARGET_ELF} PROPERTIES
- LINK_FLAGS ${LINKER_FLAGS}
- SUFFIX "" # XXX Force Windows to keep the .exe off
-)
+##| If there are multiple DefaultMaps, it is defined here. If, the specified DefaultMap is not found, defaultMap.h is used.
+set( DefaultMap "kishsaver" )
+##| PartialMap combined keymap layering. The first keymap has the "least" precedence.
+set( CombinedMap colemak capslock2ctrl )
-#| Convert the .ELF into a .HEX to load onto the Teensy
-set( TARGET_HEX ${TARGET}.hex )
-add_custom_command( TARGET ${TARGET_ELF} POST_BUILD
- COMMAND ${OBJCOPY} ${HEX_FLAGS} ${TARGET_ELF} ${TARGET_HEX}
- COMMENT "Creating load file for Flash: ${TARGET_HEX}"
-)
+##| ParitalMaps available on top of the CombinedMap. If there are input conflicts, the last PartialMap takes precedence.
+set( PartialMaps hhkbnav kbdctrl )
+##| MacroSets define extra capabilities that are not provided by the Scan or Output modules. Last MacroSet takes precedence.
+set( MacroSets retype )
-#| Generate the Extended .LSS
-set( TARGET_LSS ${TARGET}.lss )
-add_custom_command( TARGET ${TARGET_ELF} POST_BUILD
- COMMAND ${OBJDUMP} ${LSS_FLAGS} ${TARGET_ELF} > ${TARGET_LSS}
- COMMENT "Creating Extended Listing: ${TARGET_LSS}"
-)
-#| Generate the Symbol Table .SYM
-set( TARGET_SYM ${TARGET}.sym )
-add_custom_command( TARGET ${TARGET_ELF} POST_BUILD
- COMMAND ${NM} -n ${TARGET_ELF} > ${TARGET_SYM}
- COMMENT "Creating Symbol Table: ${TARGET_SYM}"
+###
+# Source Defines (in addition to the selected Modules)
+#
+set( MAIN_SRCS
+ main.c
)
###
-# Size Information
+# Project Description
#
-#| After Changes Size Information
-add_custom_target( SizeAfter ALL ${SIZE} --target=${FORMAT} ${TARGET_HEX} ${TARGET_ELF}
- DEPENDS ${TARGET_ELF}
- COMMENT "Size after generation:"
-)
+#| Project
+project( kiibohd_controller )
+
+#| Target Name (output name)
+set( TARGET kiibohd )
+
+#| General Settings
+cmake_minimum_required( VERSION 2.8 )
###
-# Setup Loader Script
+# Module Initialization / Compilation / Targets
#
-
-#| Provides the user with the correct teensy-loader-cli command for the built .HEX file
-#| teensy-loader-cli must be in the user's path
-if( ${CMAKE_SYSTEM_NAME} MATCHES "Linux" OR ${CMAKE_SYSTEM_NAME} MATCHES "Darwin" )
- configure_file( LoadFile/bash load )
-endif()
-
-#| TODO Windows
-if( ${CMAKE_SYSTEM_NAME} MATCHES "Windows" )
- configure_file( LoadFile/bash load )
-endif()
+include( Lib/CMake/modules.cmake )