-#\r
-# LUFA Library\r
-# Copyright (C) Dean Camera, 2017.\r
-#\r
-# dean [at] fourwalledcubicle [dot] com\r
-# www.lufa-lib.org\r
-#\r
-# --------------------------------------\r
-# LUFA Project Makefile.\r
-# --------------------------------------\r
-\r
-# Run "make help" for target help.\r
-\r
-MCU = at90usb1287\r
-ARCH = AVR8\r
-BOARD = USBKEY\r
-F_CPU = 8000000\r
-F_USB = $(F_CPU)\r
-OPTIMIZATION = s\r
-TARGET = BootloaderPrinter\r
-SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)\r
-LUFA_PATH = ../../LUFA\r
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)\r
-LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)\r
-\r
-# Flash size and bootloader section sizes of the target, in KB. These must\r
-# match the target's total FLASH size and the bootloader size set in the\r
-# device's fuses.\r
-FLASH_SIZE_KB = 128\r
-BOOT_SECTION_SIZE_KB = 8\r
-\r
-# Bootloader address calculation formulas\r
-# Do not modify these macros, but rather modify the dependent values above.\r
-CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )\r
-BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )\r
-BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )\r
-\r
-# Bootloader linker section flags for relocating the API table sections to\r
-# known FLASH addresses - these should not normally be user-edited.\r
-BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))\r
-BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)\r
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)\r
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)\r
-\r
-# Default target\r
-all:\r
-\r
-# Include LUFA-specific DMBS extension modules\r
-DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA\r
-include $(DMBS_LUFA_PATH)/lufa-sources.mk\r
-include $(DMBS_LUFA_PATH)/lufa-gcc.mk\r
-\r
-# Include common DMBS build system modules\r
-DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS\r
-include $(DMBS_PATH)/core.mk\r
-include $(DMBS_PATH)/cppcheck.mk\r
-include $(DMBS_PATH)/doxygen.mk\r
-include $(DMBS_PATH)/dfu.mk\r
-include $(DMBS_PATH)/gcc.mk\r
-include $(DMBS_PATH)/hid.mk\r
-include $(DMBS_PATH)/avrdude.mk\r
-include $(DMBS_PATH)/atprogram.mk\r
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2017.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+BOARD = USBKEY
+F_CPU = 8000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = BootloaderPrinter
+SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH = ../../LUFA
+CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB = 128
+BOOT_SECTION_SIZE_KB = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk