[Keymap] Jarred's Plaid keymap (#6049)

[qmk_firmware.git] / util / linux_install.sh

diff --git a/util/linux_install.sh b/util/linux_install.sh
index 0e8296c0d22bbb7002d496d66149e2876cba5bba..d21cd3c1c9f2c9fae9918da458ea60d9e9b1414c 100755 (executable)
--- a/util/linux_install.sh
+++ b/util/linux_install.sh
@@ -2,10 +2,14 @@
 
 # Note: This file uses tabs to indent. Please don't mix tabs and spaces.
 
 
 # Note: This file uses tabs to indent. Please don't mix tabs and spaces.
 

-GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmk_firmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
+GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmkfirmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."

 
 SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
 
 
 SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
 

+SOLUS_INFO="Your tools are now installed. To start using them, open new terminal or source these scripts:\n\t/usr/share/defaults/etc/profile.d/50-arm-toolchain-path.sh\n\t/usr/share/defaults/etc/profile.d/50-avr-toolchain-path.sh"
+
+util_dir=$(dirname "$0")
+

 if grep ID /etc/os-release | grep -qE "fedora"; then
        sudo dnf install \
                arm-none-eabi-binutils-cs \
 if grep ID /etc/os-release | grep -qE "fedora"; then
        sudo dnf install \
                arm-none-eabi-binutils-cs \


@@ -25,6 +29,7 @@ if grep ID /etc/os-release | grep -qE "fedora"; then
                kernel-headers \
                make \
                perl \
                kernel-headers \
                make \
                perl \

+               python3 \

                unzip \
                wget \
                zip
                unzip \
                wget \
                zip


@@ -32,9 +37,9 @@ if grep ID /etc/os-release | grep -qE "fedora"; then
 elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
        DEBIAN_FRONTEND=noninteractive
        DEBCONF_NONINTERACTIVE_SEEN=true
 elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
        DEBIAN_FRONTEND=noninteractive
        DEBCONF_NONINTERACTIVE_SEEN=true

-        export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
+       export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN

        sudo apt-get update
        sudo apt-get update

-       sudo apt-get install \
+       sudo apt-get -yq install \

                build-essential \
                avr-libc \
                binutils-arm-none-eabi \
                build-essential \
                avr-libc \
                binutils-arm-none-eabi \


@@ -47,48 +52,49 @@ elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
                gcc-avr \
                git \
                libnewlib-arm-none-eabi \
                gcc-avr \
                git \
                libnewlib-arm-none-eabi \

+               python3 \

                unzip \
                wget \
                zip
 
 elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
                unzip \
                wget \
                zip
 
 elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then

-       # install avr-gcc 8.1 until 8.3 is available. See #3657 for details of the bug.
-       sudo pacman -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.1.0-1-x86_64.pkg.tar.xz
+       sudo pacman -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz

        sudo pacman -S \
                arm-none-eabi-binutils \
                arm-none-eabi-gcc \
                arm-none-eabi-newlib \
        sudo pacman -S \
                arm-none-eabi-binutils \
                arm-none-eabi-gcc \
                arm-none-eabi-newlib \

+               avrdude \

                avr-binutils \
                avr-libc \
                avr-gcc \
                avr-binutils \
                avr-libc \
                avr-gcc \

-    base-devel \
+               base-devel \

                dfu-util \
                dfu-util \

-               diff-utils \
+               diffutils \

                gcc \
                git \
                gcc \
                git \

+               python \

                unzip \
                wget \
                zip
        git clone https://aur.archlinux.org/dfu-programmer.git /tmp/dfu-programmer
                unzip \
                wget \
                zip
        git clone https://aur.archlinux.org/dfu-programmer.git /tmp/dfu-programmer

-       cd /tmp/dfu-programmer
+       cd /tmp/dfu-programmer || exit 1

        makepkg -sic
        rm -rf /tmp/dfu-programmer/
 
 elif grep ID /etc/os-release | grep -q gentoo; then
        makepkg -sic
        rm -rf /tmp/dfu-programmer/
 
 elif grep ID /etc/os-release | grep -q gentoo; then

-       echo GENTOO_WARNING | fmt
-       echo -n "Proceed (y/N)? "
-       old_stty_cfg=$(stty -g)
-       stty raw -echo
-       answer=$( while ! head -c 1 | grep -i '[ny]' ;do true ;done )
-       stty $old_stty_cfg
-       if echo "$answer" | grep -iq "^y" ;then
+       echo "$GENTOO_WARNING" | fmt
+       printf "\nProceed (y/N)? "
+       read -r answer
+       if echo "$answer" | grep -iq "^y"; then

                sudo touch /etc/portage/package.use/qmkfirmware
                sudo touch /etc/portage/package.use/qmkfirmware

-               echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware > /dev/null
+               # tee is used here since sudo doesn't apply to >>
+               echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null

                sudo emerge -auN \
                        app-arch/unzip \
                        app-arch/zip \
                        app-mobilephone/dfu-util \
                        dev-embedded/avrdude \
                sudo emerge -auN \
                        app-arch/unzip \
                        app-arch/zip \
                        app-mobilephone/dfu-util \
                        dev-embedded/avrdude \

+                       dev-lang/python:3.5 \

                        net-misc/wget \
                        sys-devel/gcc \
                        sys-devel/crossdev
                        net-misc/wget \
                        sys-devel/gcc \
                        sys-devel/crossdev


@@ -104,6 +110,7 @@ elif grep ID /etc/os-release | grep -q sabayon; then
                app-arch/zip \
                app-mobilephone/dfu-util \
                dev-embedded/avrdude \
                app-arch/zip \
                app-mobilephone/dfu-util \
                dev-embedded/avrdude \

+               dev-lang/python \

                net-misc/wget \
                sys-devel/gcc \
                sys-devel/crossdev
                net-misc/wget \
                sys-devel/gcc \
                sys-devel/crossdev


@@ -113,7 +120,7 @@ elif grep ID /etc/os-release | grep -q sabayon; then
 elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
        CROSS_AVR_GCC=cross-avr-gcc8
        CROSS_ARM_GCC=cross-arm-none-gcc8
 elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
        CROSS_AVR_GCC=cross-avr-gcc8
        CROSS_ARM_GCC=cross-arm-none-gcc8

-       if grep ID /etc/os-release | grep -q "15.0"; then
+       if grep ID /etc/os-release | grep -q "15."; then

                CROSS_AVR_GCC=cross-avr-gcc7
                CROSS_ARM_GCC=cross-arm-none-gcc7
        fi
                CROSS_AVR_GCC=cross-avr-gcc7
                CROSS_ARM_GCC=cross-arm-none-gcc7
        fi


@@ -127,6 +134,7 @@ elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
                dfu-tool \
                dfu-programmer \
                gcc \
                dfu-tool \
                dfu-programmer \
                gcc \

+               python3 \

                unzip \
                wget \
                zip
                unzip \
                wget \
                zip


@@ -145,14 +153,38 @@ elif grep ID /etc/os-release | grep -q slackware; then
                        dfu-util \
                        arm-binutils \
                        arm-gcc \
                        dfu-util \
                        arm-binutils \
                        arm-gcc \

-                       newlib
+                       newlib \
+                       python3

                echo "Done!"
        else
                echo "Quitting..."
        fi
 
                echo "Done!"
        else
                echo "Quitting..."
        fi
 

+elif grep ID /etc/os-release | grep -q solus; then
+       sudo eopkg ur
+       sudo eopkg it \
+               -c system.devel \
+               arm-none-eabi-gcc \
+               arm-none-eabi-binutils \
+               arm-none-eabi-newlib \
+               avr-libc \
+               avr-binutils \
+               avr-gcc \
+               avrdude \
+               dfu-util \
+               dfu-programmer \
+               python3 \
+               git \
+               wget \
+               zip \
+               unzip
+       printf "\n$SOLUS_INFO\n"
+

 else
        echo "Sorry, we don't recognize your OS. Help us by contributing support!"
        echo
        echo "https://docs.qmk.fm/#/contributing"
 fi
 else
        echo "Sorry, we don't recognize your OS. Help us by contributing support!"
        echo
        echo "https://docs.qmk.fm/#/contributing"
 fi

+
+# Global install tasks
+pip3 install -r ${util_dir}/../requirements.txt