-#if 0
-/* Jumping To The Bootloader
- * http://www.pjrc.com/teensy/jump_to_bootloader.html
- *
- * This method doen't work when using LUFA. idk why.
- * - needs to initialize more regisers or interrupt setting?
- */
-void bootloader_jump(void) {
-#ifdef PROTOCOL_LUFA
- USB_Disable();
- cli();
- _delay_ms(2000);
-#endif
-
-#ifdef PROTOCOL_PJRC
- cli();
- UDCON = 1;
- USBCON = (1<<FRZCLK);
- UCSR1B = 0;
- _delay_ms(5);
-#endif
-
- /*
- * Initialize
- */
-#if defined(__AVR_AT90USB162__)
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
- TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
- DDRB = 0; DDRC = 0; DDRD = 0;
- PORTB = 0; PORTC = 0; PORTD = 0;
-#elif defined(__AVR_ATmega32U4__)
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
- DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
- PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
-#elif defined(__AVR_AT90USB646__)
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
- DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
- PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
-#elif defined(__AVR_AT90USB1286__)
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
- DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
- PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
-#endif
-
- /*
- * USBaspLoader
- */
-#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
- // This makes custom USBasploader come up.
- MCUSR = 0;
-
- // initialize ports
- PORTB = 0; PORTC= 0; PORTD = 0;
- DDRB = 0; DDRC= 0; DDRD = 0;
-
- // disable interrupts
- EIMSK = 0; EECR = 0; SPCR = 0;
- ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
- ADCSRA = 0; TWCR = 0; UCSR0B = 0;
-#endif
-
- // This is compled into 'icall', address should be in word unit, not byte.
- ((void (*)(void))(BOOTLOADER_START/2))();