Fix location of where the make command should be run

[qmk_firmware.git] / keyboards / nyquist / readme.md

diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md
index c70bf02576566b7670b7069e45860ee8c39989ba..61b9317d5239574953d14866da1717459f122f29 100644 (file)
--- a/keyboards/nyquist/readme.md
+++ b/keyboards/nyquist/readme.md
@@ -6,6 +6,8 @@ The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It ha
 
 ## Build Guide
 
 
 ## Build Guide
 

+A build log of the Nyquist can be found here: [Nyquist Build Log](http://imgur.com/a/dD4sX).
+

 Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
 
 There is additional information there about flashing and adding RGB underglow.
 Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
 
 There is additional information there about flashing and adding RGB underglow.


@@ -98,7 +100,7 @@ unnecessary in simple use cases.
 
 Flashing
 -------
 
 Flashing
 -------

-From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+From the `nyquist` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.

 Example: `make rev1-serial-avrdude`
 
 
 Example: `make rev1-serial-avrdude`