-|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 |
-|`rgblight_sethsv_noeeprom(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_toggle()` |Toggle all LEDs between on and off |
-|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) |
-|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations |
-|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
-|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations |
-|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
-|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue |
-|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) |
-|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue |
-|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) |
-|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation |
-|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) |
-|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation |
-|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) |
-|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value |
-|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) |
-|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value |
-|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) |
-|`rgblight_set_clipping_range(pos, num)` |Set clipping Range |
+|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_setrgb(r, g, b)` |Set effect range LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+
+Example:
+```c
+rgblight_sethsv(HSV_WHITE, 0); // led 0
+rgblight_sethsv(HSV_RED, 1); // led 1
+rgblight_sethsv(HSV_GREEN, 2); // led 2
+// The above functions automatically calls rgblight_set(), so there is no need to call it explicitly.
+// Note that it is inefficient to call repeatedly.
+```
+
+#### effect mode change
+|Function |Description |
+|--------------------------------------------|-------------|
+|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled |
+|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) |
+|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations |
+|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
+|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations |
+|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
+
+#### effects mode disable/enable
+|Function |Description |
+|--------------------------------------------|-------------|
+|`rgblight_toggle()` |Toggle effect range LEDs between on and off |
+|`rgblight_toggle_noeeprom()` |Toggle effect range LEDs between on and off (not written to EEPROM) |
+|`rgblight_enable()` |Turn effect range LEDs on, based on their previous state |
+|`rgblight_enable_noeeprom()` |Turn effect range LEDs on, based on their previous state (not written to EEPROM) |
+|`rgblight_disable()` |Turn effect range LEDs off |
+|`rgblight_disable_noeeprom()` |Turn effect range LEDs off (not written to EEPROM) |
+
+#### hue, sat, val change
+|Function |Description |
+|--------------------------------------------|-------------|
+|`rgblight_increase_hue()` |Increase the hue for effect range LEDs. This wraps around at maximum hue |
+|`rgblight_increase_hue_noeeprom()` |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) |
+|`rgblight_decrease_hue()` |Decrease the hue for effect range LEDs. This wraps around at minimum hue |
+|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) |
+|`rgblight_increase_sat()` |Increase the saturation for effect range LEDs. This wraps around at maximum saturation |
+|`rgblight_increase_sat_noeeprom()` |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) |
+|`rgblight_decrease_sat()` |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation |
+|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) |
+|`rgblight_increase_val()` |Increase the value for effect range LEDs. This wraps around at maximum value |
+|`rgblight_increase_val_noeeprom()` |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) |
+|`rgblight_decrease_val()` |Decrease the value for effect range LEDs. This wraps around at minimum value |
+|`rgblight_decrease_val_noeeprom()` |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) |
+|`rgblight_sethsv(h, s, v)` |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
+|`rgblight_sethsv_noeeprom(h, s, v)` |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+
+#### query
+|Function |Description |
+|-----------------------|-----------------|
+|`rgblight_get_mode()` |Get current mode |
+|`rgblight_get_hue()` |Get current hue |
+|`rgblight_get_sat()` |Get current sat |
+|`rgblight_get_val()` |Get current val |