ergodox_ez: Add a SuperCoder keymap

[qmk_firmware.git] / converter / adb_usb / README.md

diff --git a/converter/adb_usb/README.md b/converter/adb_usb/README.md
index 3033cfa6202db2388ae066c3057c7c064baf0702..46082ff67f971eb3966a297d2c4636e9c0d77ed9 100644 (file)
--- a/converter/adb_usb/README.md
+++ b/converter/adb_usb/README.md
@@ -7,58 +7,69 @@ But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U
 Discuss: http://geekhack.org/showwiki.php?title=Island:14290
 
 
 Discuss: http://geekhack.org/showwiki.php?title=Island:14290
 
 

+
+README FIRST
+------------
+https://github.com/tmk/tmk_keyboard
+https://github.com/tmk/tmk_keyboard/tree/master/converter/adb_usb
+
+Also check these when you are in trouble.
+
+https://github.com/tmk/tmk_keyboard/wiki
+https://github.com/tmk/tmk_keyboard/labels/NOTE
+
+
+Wiring
+------
+Connect ADB pins to controller just by 3 lines(Vcc, GND, Data). By default Data line uses port PD0.
+
+ADB female socket from the front:
+
+      ,--_--.
+     / o4 3o \      1: DATA
+    | o2   1o |     2: Power SW
+     -  ===  -      3: VCC
+      `-___-'       4: GND
+
+This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.(It is almost must!)
+https://github.com/tmk/tmk_keyboard/wiki/FAQ#pull-up-resistor
+
+Pull-up resister:
+
+    Keyboard       Conveter
+                   ,------.
+    5V------+------|VCC   |
+            |      |      |
+           [R]     |      |
+            |      |      |
+    Signal--+------|PD0   |
+                   |      |
+    GND------------|GND   |
+                   `------'
+    R: 1K Ohm resistor
+
+
+Define following macros for ADB connection in config.h if you use other than port PD0.
+
+    ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
+
+

 Build
 -----
 Build
 -----

-0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port F0.
-   This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable.
-   The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.
-1. Define following macros for ADB connection in config.h if you use other than port F0.
-   ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
-2. make
-3. program Teensy
+See doc/build.md. In short,

 
 

+    $ make clean
+    $ make

 
 

-LOCKING CAPSLOCK
-----------------
-Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.
+You can select keymap(ansi is default) like this:

 
 

-Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
-http://www.youtube.com/watch?v=9wqnt2mGJ2Y
+    $ make KEYMAP=[ansi|iso|hasu]

 
 
 Keymap
 ------
 
 
 Keymap
 ------

-You can change a keymap by editing code of keymap.c like following.
-This is a keymap for AEK, however, also used for other keyboards.
-How to define the keymap is probably obvious. You can find key symbols in keycode.h.
-If you want to define some keymaps than just one, see hhkb/keymap.c and
-macway/keymap.c as examples. Keymap(layer) switching may needs a bit of
-effort at this time.
-
-    /* Default Layer: plain keymap
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.             ,---.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|             |Pwr|
-     * `---'   `---------------' `---------------' `---------------' `-----------'             `---'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  =|  /|  *|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|  -|
-     * |-----------------------------------------------------------| `-----------' |---------------|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|  +|
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
-     * |Ctrl |Gui |Alt |         Space           |     |    |      | |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,                    PWR,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,EQL, PSLS,PAST,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PMNS,
-    LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,          SPC,                                              LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
+You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c.
+How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see doc/keymap.md for more detail.

 
 
 Magic command
 
 
 Magic command


@@ -66,13 +77,27 @@ Magic command
 To get help press `h` holding Magic key. Magic key is `Power key`.
 
 
 To get help press `h` holding Magic key. Magic key is `Power key`.
 
 

+Locking CapsLock
+----------------
+Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.
+https://github.com/tmk/tmk_keyboard/blob/master/README.md#mechanical-locking-support
+
+Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
+
+

 Notes
 -----
 Notes
 -----

-Many ADB keyboards has no discrimination between right modifier and left one,
+Not-extended ADB keyboards have no discrimination between right modifier and left one,

 you will always see left control even if you press right control key.
 you will always see left control even if you press right control key.

-Apple Extended Keyboard and Apple Extended Keyboard II are the examples.
-Though ADB protocol itsef has the ability of distinction between right and left.
-And most ADB keyboard has no NKRO functionality, though ADB protocol itsef has that. 
-See protocol/adb.c for more info.
+Apple Extended Keyboard and Apple Extended Keyboard II can discriminate both side
+modifiers except for GUI key(Windows/Command).
+
+And most ADB keyboard has no diodes in its matrix so they are not NKRO,
+though ADB protocol itself supports it. See protocol/adb.c for more info.
+
+If keyboard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI
+keymap you will suffer from swapped keys problem.
+
+https://github.com/tmk/tmk_keyboard/issues/35

 
 EOF
 
 EOF