-#include "output_com.h"
-
-#define ENDPOINT_UNUSED 0x00
-#define ENDPOINT_TRANSIMIT_ONLY 0x15
-#define ENDPOINT_RECEIVE_ONLY 0x19
-#define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D
-
-/*
-To modify a USB Type to have different interfaces, start in this
-file. Delete the XYZ_INTERFACE lines for any interfaces you
-wish to remove, and copy them from another USB Type for any you
-want to add.
-
-Give each interface a unique number, and edit NUM_INTERFACE to
-reflect the number of interfaces.
-
-Within each interface, make sure it uses a unique set of endpoints.
-Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
-Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured
-the proper way (transmit, receive, or both).
-
-The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be
-edited to the correct sizes. See usb_desc.c for the giant array
-of bytes. Someday these may be done automatically..... (but how?)
-
-If you are using existing interfaces, the code in each file should
-automatically adapt to the changes you specify. If you need to
-create a new type of interface, you'll need to write the code which
-sends and receives packets, and presents an API to the user.
-
-Finally, edit usb_inst.cpp, which creats instances of the C++
-objects for each combination.
-
-Some operating systems, especially Windows, may cache USB device
-info. Changes to the device name may not update on the same
-computer unless the vendor or product ID numbers change, or the
-"bcdDevice" revision code is increased.
-
-If these instructions are missing steps or could be improved, please
-let me know? http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
-*/
-
-
-
-#define DEVICE_CLASS 0xEF
-#define DEVICE_SUBCLASS 0x02
-#define DEVICE_PROTOCOL 0x01
-#define EP0_SIZE 64
-#define NUM_ENDPOINTS 6
-#define NUM_USB_BUFFERS 30
-#define NUM_INTERFACE 4
-#define CDC_IAD_DESCRIPTOR 1
-#define CDC_STATUS_INTERFACE 0
-#define CDC_DATA_INTERFACE 1 // Serial
-#define CDC_ACM_ENDPOINT 2
-#define CDC_RX_ENDPOINT 3
-#define CDC_TX_ENDPOINT 4
-#define CDC_ACM_SIZE 16
-#define CDC_RX_SIZE 64
-#define CDC_TX_SIZE 64
-#define KEYBOARD_INTERFACE 2 // Keyboard
-#define KEYBOARD_ENDPOINT 1
-#define KEYBOARD_SIZE 8
-#define KEYBOARD_INTERVAL 1
-#define MOUSE_INTERFACE 3 // Mouse
-#define MOUSE_ENDPOINT 5
-#define MOUSE_SIZE 8
-#define MOUSE_INTERVAL 2
-#define JOYSTICK_INTERFACE 4 // Joystick
-#define JOYSTICK_ENDPOINT 6
-#define JOYSTICK_SIZE 16
-#define JOYSTICK_INTERVAL 1
-#define KEYBOARD_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9)
-#define MOUSE_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
-#define JOYSTICK_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
-#define CONFIG_DESC_SIZE (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
-#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
-#define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
-#define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY