+ 2018 02 20
+ - RT #124469, #124494, perltidy often making empty files. The previous had
+ an index error causing it to fail, particularly in version 5.18 of Perl.
+
+ Please avoid version 20180219.
+
+ 2018 02 19
+ - RT #79947, cuddled-else generalization. A new flag -cb provides
+ 'cuddled-else' type formatting for an arbitrary type of block chain. The
+ default is try-catch-finally, but this can be modified with the
+ parameter -cbl.
+
+ - Fixed RT #124298: add space after ! operator without breaking !! secret
+ operator
+
+ - RT #123749: numerous minor improvements to the -wn flag were made.
+
+ - Fixed a problem with convergence tests in which iterations were stopping
+ prematurely.
+
+ - Here doc targets for <<~ type here-docs may now have leading whitespace.
+
+ - Fixed RT #124354. The '-indent-only' flag was not working correctly in the
+ previous release. A bug in version 20180101 caused extra blank lines
+ to be output.
+
+ - Issue RT #124114. Some improvements were made in vertical alignment
+ involving 'fat commas'.
+
+ 2018 01 01
+ - Added new flag -wn (--weld-nested-containers) which addresses these issues:
+ RT #123749: Problem with promises;
+ RT #119970: opening token stacking strange behavior;
+ RT #81853: Can't stack block braces
+
+ This option causes closely nested pairs of opening and closing containers
+ to be "welded" together and essentially be formatted as a single unit,
+ with just one level of indentation.
+
+ Since this is a new flag it is set to be "off" by default but it has given
+ excellent results in testing.
+
+ EXAMPLE 1, multiple blocks, default formatting:
+ do {
+ {
+ next if $x == $y; # do something here
+ }
+ } until $x++ > $z;
+
+ perltidy -wn
+ do { {
+ next if $x == $y;
+ } } until $x++ > $z;
+
+ EXAMPLE 2, three levels of wrapped function calls, default formatting:
+ p(
+ em(
+ conjug(
+ translate( param('verb') ), param('tense'),
+ param('person')
+ )
+ )
+ );
+
+ # perltidy -wn
+ p( em( conjug(
+ translate( param('verb') ),
+ param('tense'), param('person')
+ ) ) );
+
+ # EXAMPLE 3, chained method calls, default formatting:
+ get('http://mojolicious.org')->then(
+ sub {
+ my $mojo = shift;
+ say $mojo->res->code;
+ return get('http://metacpan.org');
+ }
+ )->then(
+ sub {
+ my $cpan = shift;
+ say $cpan->res->code;
+ }
+ )->catch(
+ sub {
+ my $err = shift;
+ warn "Something went wrong: $err";
+ }
+ )->wait;
+
+ # perltidy -wn
+ get('http://mojolicious.org')->then( sub {
+ my $mojo = shift;
+ say $mojo->res->code;
+ return get('http://metacpan.org');
+ } )->then( sub {
+ my $cpan = shift;
+ say $cpan->res->code;
+ } )->catch( sub {
+ my $err = shift;
+ warn "Something went wrong: $err";
+ } )->wait;
+
+
+ - Fixed RT #114359: Missparsing of "print $x ** 0.5;
+
+ - Deactivated the --check-syntax flag for better security. It will be
+ ignored if set.
+
+ - Corrected minimum perl version from 5.004 to 5.008 based on perlver
+ report. The change is required for coding involving wide characters.
+
+ - For certain severe errors, the source file will be copied directly to the
+ output without formatting. These include ending in a quote, ending in a
+ here doc, and encountering an unidentified character.
+
+ 2017 12 14
+ - RT #123749, partial fix. "Continuation indentation" is removed from lines
+ with leading closing parens which are part of a call chain.
+ For example, the call to pack() is is now outdented to the starting
+ indentation in the following experession:
+
+ # OLD
+ $mw->Button(
+ -text => "New Document",
+ -command => \&new_document
+ )->pack(
+ -side => 'bottom',
+ -anchor => 'e'
+ );
+
+ # NEW
+ $mw->Button(
+ -text => "New Document",
+ -command => \&new_document
+ )->pack(
+ -side => 'bottom',
+ -anchor => 'e'
+ );
+
+ This modification improves readability of complex expressions, especially
+ when the user uses the same value for continuation indentation (-ci=n) and
+ normal indentation (-i=n). Perltidy was already programmed to
+ do this but a minor bug was preventing it.
+
+ - RT #123774, added flag to control space between a backslash and a single or
+ double quote, requested by Robert Rothenberg. The issue is that lines like
+
+ $str1=\"string1";
+ $str2=\'string2';
+
+ confuse syntax highlighters unless a space is left between the backslash and
+ the quote.
+
+ The new flag to control this is -sbq=n (--space-backslash-quote=n),
+ where n=0 means no space, n=1 means follow existing code, n=2 means always
+ space. The default is n=1, meaning that a space will be retained if there
+ is one in the source code.
+
+ - Fixed RT #123492, support added for indented here doc operator <<~ added
+ in v5.26. Thanks to Chris Weyl for the report.
+
+ - Fixed docs; --closing-side-comment-list-string should have been just
+ --closing-side-comment-list. Thanks to F.Li.
+
+ - Added patch RT #122030] Perl::Tidy sometimes does not call binmode.
+ Thanks to Irilis Aelae.
+
+ - Fixed RT #121959, PERLTIDY doesn't honor the 'three dot' notation for
+ locating a config file using environment variables. Thanks to John
+ Wittkowski.
+
+ - Minor improvements to formatting, in which some additional vertical
+ aligmnemt is done. Thanks to Keith Neargarder.
+
+ - RT #119588. Vertical alignment is no longer done for // operator.
+
+ 2017 05 21
+ - Fixed debian #862667: failure to check for perltidy.ERR deletion can lead
+ to overwriting abritrary files by symlink attack. Perltidy was continuing
+ to write files after an unlink failure. Thanks to Don Armstrong
+ for a patch.
+
+ - Fixed RT #116344, perltidy fails on certain anonymous hash references:
+ in the following code snippet the '?' was misparsed as a pattern
+ delimiter rather than a ternary operator.
+ return ref {} ? 1 : 0;
+
+ - Fixed RT #113792: misparsing of a fat comma (=>) right after
+ the __END__ or __DATA__ tokens. These keywords were getting
+ incorrectly quoted by the following => operator.
+
+ - Fixed RT #118558. Custom Getopt::Long configuration breaks parsing
+ of perltidyrc. Perltidy was resetting the users configuration too soon.
+
+ - Fixed RT #119140, failure to parse double diamond operator. Code to
+ handle this new operator has been added.
+
+ - Fixed RT #120968. Fixed problem where -enc=utf8 didn't work
+ with --backup-and-modify-in-place. Thanks to Heinz Knutzen for this patch.
+
+ - Fixed minor formatting issue where one-line blocks for subs with signatures
+ were unnecesarily broken
+
+ - RT #32905, patch to fix utf-8 error when output was STDOUT.
+
+ - RT #79947, improved spacing of try/catch/finally blocks. Thanks to qsimpleq
+ for a patch.
+
+ - Fixed #114909, Anonymous subs with signatures and prototypes misparsed as
+ broken ternaries, in which a statement such as this was not being parsed
+ correctly:
+ return sub ( $fh, $out ) : prototype(*$) { ... }
+
+ - Implemented RT #113689, option to introduces spaces after an opening block
+ brace and before a closing block brace. Four new optional controls are
+ added. The first two define the minimum number of blank lines to be
+ inserted
+
+ -blao=i or --blank-lines-after-opening-block=i
+ -blbc=i or --blank-lines-before-closing-block=i
+
+ where i is an integer, the number of lines (the default is 0).
+
+ The second two define the types of blocks to which the first two apply
+
+ -blaol=s or --blank-lines-after-opening-block-list=s
+ -blbcl=s or --blank-lines-before-closing-block-list=s
+
+ where s is a string of possible block keywords (default is just 'sub',
+ meaning a named subroutine).
+
+ For more information please see the documentation.
+
+ - The method for specifying block types for certain input parameters has
+ been generalized to distinguish between normal named subroutines and
+ anonymous subs. The keyword for normal subroutines remains 'sub', and
+ the new keyword for anonymous subs is 'asub'.
+
+ - Minor documentation changes. The BUGS sections now have a link
+ to CPAN where most open bugs and issues can be reviewed and bug reports
+ can be submitted. The information in the AUTHOR and CREDITS sections of
+ the man pages have been removed from the man pages to streamline the
+ documentation. This information is still in the source code.
+
+ 2016 03 02
+ - RT #112534. Corrected a minor problem in which an unwanted newline
+ was placed before the closing brace of an anonymous sub with
+ a signature, if it was in a list. Thanks to Dmytro Zagashev.
+
+ - Corrected a minor problem in which occasional extra indentation was
+ given to the closing brace of an anonymous sub in a list when the -lp
+ parameter was set.
+
+ 2016 03 01
+ - RT #104427. Added support for signatures.
+
+ - RT #111512. Changed global warning flag $^W = 1 to use warnings;
+ Thanks to Dmytro Zagashev.
+
+ - RT #110297, added support for new regexp modifier /n
+ Thanks to Dmytro Zagashev.
+
+ - RT #111519. The -io (--indent-only) and -dac (--delete-all-comments)
+ can now both be used in one pass. Thanks to Dmitry Veltishev.
+
+ - Patch to avoid error message with 'catch' used by TryCatch, as in
+ catch($err){
+ # do something
+ }
+ Thanks to Nick Tonkin.
+
+ - RT #32905, UTF-8 coding is now more robust. Thanks to qsimpleq
+ and Dmytro for patches.
+
+ - RT #106885. Added string bitwise operators ^. &. |. ~. ^.= &.= |.=
+
+ - Fixed RT #107832 and #106492, lack of vertical alignment of two lines
+ when -boc flag (break at old commas) is set. This bug was
+ inadvertantly introduced in previous bug fix RT #98902.
+
+ - Some common extensions to Perl syntax are handled better.
+ In particular, the following snippet is now foratted cleanly:
+
+ method deposit( Num $amount) {
+ $self->balance( $self->balance + $amount );
+ }
+
+ A new flag -xs (--extended-syntax) was added to enable this, and the default
+ is to use -xs.
+
+ In previous versions, and now only when -nxs is set, this snippet of code
+ generates the following error message:
+
+ "syntax error at ') {', didn't see one of: case elsif for foreach given if switch unless until when while"
+
+ 2015 08 15
+ - Fixed RT# 105484, Invalid warning about 'else' in 'switch' statement. The
+ warning happened if a 'case' statement did not use parens.
+
+ - Fixed RT# 101547, misparse of // caused error message. Also..
+
+ - Fixed RT# 102371, misparse of // caused unwated space in //=
+
+ - Fixed RT# 100871, "silent failure of HTML Output on Windows".
+ Changed calls to tempfile() from:
+ my ( $fh_tmp, $tmpfile ) = tempfile();
+ to have the full path name:
+ my ( $fh_tmp, $tmpfile ) = File::Temp::tempfile()
+ because of problems in the Windows version reported by Dean Pearce.
+
+ - Fixed RT# 99514, calling the perltidy module multiple times with
+ a .perltidyrc file containing the parameter --output-line-ending
+ caused a crash. This was a glitch in the memoization logic.
+
+ - Fixed RT#99961, multiple lines inside a cast block caused unwanted
+ continuation indentation.
+
+ - RT# 32905, broken handling of UTF-8 strings.
+ A new flag -utf8 causes perltidy assume UTF-8 encoding for input and
+ output of an io stream. Thanks to Sebastian Podjasek for a patch.
+ This feature may not work correctly in older versions of Perl.
+ It worked in a linux version 5.10.1 but not in a Windows version 5.8.3 (but
+ otherwise perltidy ran correctly).
+
+ - Warning files now report perltidy VERSION. Suggested by John Karr.
+
+ - Fixed long flag --nostack-closing-tokens (-nsct has always worked though).
+ This was due to a typo. This also fixed --nostack-opening-tokens to
+ behave correctly. Thanks to Rob Dixon.
+
+ 2014 07 11
+ - Fixed RT #94902: abbreviation parsing in .perltidyrc files was not
+ working for multi-line abbreviations. Thanks to Eric Fung for
+ supplying a patch.
+
+ - Fixed RT #95708, misparsing of a hash when the first key was a perl
+ keyword, causing a semicolon to be incorrectly added.
+
+ - Fixed RT #94338 for-loop in a parenthesized block-map. A code block within
+ parentheses of a map, sort, or grep function was being mistokenized. In
+ rare cases this could produce in an incorrect error message. The fix will
+ produce some minor formatting changes. Thanks to Daniel Trizen
+ discovering and documenting this.
+
+ - Fixed RT #94354, excess indentation for stacked tokens. Thanks to
+ Colin Williams for supplying a patch.
+
+ - Added support for experimental postfix dereferencing notation introduced in
+ perl 5.20. RT #96021.
+
+ - Updated documentation to clarify the behavior of the -io flag
+ in response to RT #95709. You can add -noll or -l=0 to prevent
+ long comments from being outdented when -io is used.
+
+ - Added a check to prevent a problem reported in RT #81866, where large
+ scripts which had been compressed to a single line could not be formatted
+ because of a check for VERSION for MakeMaker. The workaround was to
+ use -nvpl, but this shouldn't be necessary now.
+
+ - Fixed RT #96101; Closing brace of anonymous sub in a list was being
+ indented. For example, the closing brace of the anonymous sub below
+ will now be lined up with the word 'callback'. This problem
+ occured if there was no comma after the closing brace of the anonymous sub.
+ This update may cause minor changes to formatting of code with lists
+ of anonymous subs, especially TK code.
+
+ # OLD
+ my @menu_items = (
+
+ #...
+ {
+ path => '/_Operate/Transcode and split',
+ callback => sub {
+ return 1 if not $self->project_opened;
+ $self->comp('project')->transcode( split => 1 );
+ }
+ }
+ );
+
+ # NEW
+ my @menu_items = (
+
+ #...
+ {
+ path => '/_Operate/Transcode and split',
+ callback => sub {
+ return 1 if not $self->project_opened;
+ $self->comp('project')->transcode( split => 1 );
+ }
+ }
+ );
+
+ 2014 03 28
+ - Fixed RT #94190 and debian Bug #742004: perltidy.LOG file left behind.
+ Thanks to George Hartzell for debugging this. The problem was
+ caused by the memoization speedup patch in version 20121207. An
+ unwanted flag was being set which caused a LOG to be written if
+ perltidy was called multiple times.
+
+ - New default behavior for LOG files: If the source is from an array or
+ string (through a call to the perltidy module) then a LOG output is only
+ possible if a logfile stream is specified. This is to prevent
+ unexpected perltidy.LOG files.
+
+ - Fixed debian Bug #740670, insecure temporary file usage. File::Temp is now
+ used to get a temporary file. Thanks to Don Anderson for a patch.
+
+ - Any -b (--backup-and-modify-in-place) flag is silently ignored when a
+ source stream, destination stream, or standard output is used.
+ This is because the -b flag may have been in a .perltidyrc file and
+ warnings break Test::NoWarnings. Thanks to Marijn Brand.
+
+ 2013 09 22
+ - Fixed RT #88020. --converge was not working with wide characters.
+
+ - Fixed RT #78156. package NAMESPACE VERSION syntax not accepted.
+
+ - First attempt to fix RT #88588. INDEX END tag change in pod2html breaks
+ perltidy -html. I put in a patch which should work but I don't yet have
+ a way of testing it.
+
+ 2013 08 06
+ - Fixed RT #87107, spelling
+
+ 2013 08 05
+ - Fixed RT #87502, incorrect of parsing of smartmatch before hash brace
+
+ - Added feature request RT #87330, trim whitespace after POD.
+ The flag -trp (--trim-pod) will trim trailing whitespace from lines of POD
+
+ 2013 07 17
+ - Fixed RT #86929, #86930, missing lhs of assignment.
+
+ - Fixed RT #84922, moved pod from Tidy.pm into Tidy.pod
+
+ 2012 12 07
+ - The flag -cab=n or --comma-arrow-breakpoints=n has been generalized
+ to give better control over breaking open short containers. The
+ possible values are now:
+
+ n=0 break at all commas after =>
+ n=1 stable: break at all commas after => if container is open,
+ EXCEPT FOR one-line containers
+ n=2 break at all commas after =>, BUT try to form the maximum
+ maximum one-line container lengths
+ n=3 do not treat commas after => specially at all
+ n=4 break everything: like n=0 but also break a short container with
+ a => not followed by a comma
+ n=5 stable: like n=1 but ALSO break at open one-line containers (default)
+
+ New values n=4 and n=5 have been added to allow short blocks to be
+ broken open. The new default is n=5, stable. It should more closely
+ follow the breaks in the input file, and previously formatted code
+ should remain unchanged. If this causes problems use -cab=1 to recover
+ the former behavior. Thanks to Tony Maszeroski for the suggestion.
+
+ To illustrate the need for the new options, if perltidy is given
+ the following code, then the old default (-cab=1) was to close up
+ the 'index' container even if it was open in the source. The new
+ default (-cab=5) will keep it open if it was open in the source.
+
+ our $fancypkg = {
+ 'ALL' => {
+ 'index' => {
+ 'key' => 'value',
+ },
+ 'alpine' => {
+ 'one' => '+',
+ 'two' => '+',
+ 'three' => '+',
+ },
+ }
+ };
+
+ - New debug flag --memoize (-mem). This version contains a
+ patch supplied by Jonathan Swartz which can significantly speed up
+ repeated calls to Perl::Tidy::perltidy in a single process by caching
+ the result of parsing the formatting parameters. A factor of up to 10
+ speedup was achieved for masontidy (https://metacpan.org/module/masontidy).
+ The memoization patch is on by default but can be deactivated for
+ testing with -nmem (or --no-memoize).
+
+ - New flag -tso (--tight-secret-operators) causes certain perl operator
+ sequences (secret operators) to be formatted "tightly" (without spaces).
+ The most common of these are 0 + and + 0 which become 0+ and +0. The
+ operators currently modified by this flag are:
+ =( )= 0+ +0 ()x!! ~~<> ,=>
+ Suggested by by Philippe Bruhat. See https://metacpan.org/module/perlsecret
+ This flag is off by default.
+
+ - New flag -vmll (--variable-maximum-line-length) makes the maximum
+ line length increase with the nesting depth of a line of code.
+ Basically, it causes the length of leading whitespace to be ignored when
+ setting line breaks, so the formatting of a block of code is independent
+ of its nesting depth. Try this option if you have deeply nested
+ code or data structures, perhaps in conjunction with the -wc flag
+ described next. The default is not todo this.
+
+ - New flag -wc=n (--whitespace-cycle=n) also addresses problems with
+ very deeply nested code and data structures. When this parameter is
+ used and the nesting depth exceeds the value n, the leading whitespace
+ will be reduced and start at 1 again. The result is that deeply
+ nested blocks of code will shift back to the left. This occurs cyclically
+ to any nesting depth. This flag may be used either with or without -vmll.
+ The default is not to use this (-wc=0).
+
+ - Fixed RT #78764, error parsing smartmatch operator followed by anonymous
+ hash or array and then a ternary operator; two examples:
+
+ qr/3/ ~~ ['1234'] ? 1 : 0;
+ map { $_ ~~ [ '0', '1' ] ? 'x' : 'o' } @a;
+
+ - Fixed problem with specifying spaces around arrows using -wls='->'
+ and -wrs='->'. Thanks to Alain Valleton for documenting this problem.
+
+ - Implemented RT #53183, wishlist, lines of code with the same indentation
+ level which are contained with multiple stacked opening and closing tokens
+ (requested with flags -sot -sct) now have reduced indentation.
+
+ # Default
+ $sender->MailMsg(
+ {
+ to => $addr,
+ subject => $subject,
+ msg => $body
+ }
+ );
+
+ # OLD: perltidy -sot -sct
+ $sender->MailMsg( {
+ to => $addr,
+ subject => $subject,
+ msg => $body
+ } );
+
+ # NEW: perltidy -sot -sct
+ $sender->MailMsg( {
+ to => $addr,
+ subject => $subject,
+ msg => $body
+ } );
+
+ - New flag -act=n (--all-containers-tightness=n) is an abbreviation for
+ -pt=n -sbt=n -bt=n -bbt=n, where n=0,1, or 2. It simplifies input when all
+ containers have the same tightness. Using the same example:
+
+ # NEW: perltidy -sot -sct -act=2
+ $sender->MailMsg({
+ to => $addr,
+ subject => $subject,
+ msg => $body
+ });
+
+ - New flag -sac (--stack-all-containers) is an abbreviation for -sot -sct
+ This is part of wishlist item RT #53183. Using the same example again:
+
+ # NEW: perltidy -sac -act=2
+ $sender->MailMsg({
+ to => $addr,
+ subject => $subject,
+ msg => $body
+ });
+
+ - new flag -scbb (--stack-closing-block-brace) causes isolated closing
+ block braces to stack as in the following example. (Wishlist item RT#73788)
+
+ DEFAULT:
+ for $w1 (@w1) {
+ for $w2 (@w2) {
+ for $w3 (@w3) {
+ for $w4 (@w4) {
+ push( @lines, "$w1 $w2 $w3 $w4\n" );
+ }
+ }
+ }
+ }
+
+ perltidy -scbb:
+ for $w1 (@w1) {
+ for $w2 (@w2) {
+ for $w3 (@w3) {
+ for $w4 (@w4) {
+ push( @lines, "$w1 $w2 $w3 $w4\n" );
+ } } } }
+
+ There is, at present, no flag to place these closing braces at the end
+ of the previous line. It seems difficult to develop good rules for
+ doing this for a wide variety of code and data structures.
+
+ - Parameters defining block types may use a wildcard '*' to indicate
+ all block types. Previously it was not possible to include bare blocks.
+
+ - A flag -sobb (--stack-opening-block-brace) has been introduced as an
+ alias for -bbvt=2 -bbvtl='*'. So for example the following test code:
+
+ {{{{{{{ $testing }}}}}}}
+
+ cannot be formatted as above but can at least be kept vertically compact
+ using perltidy -sobb -scbb
+
+ { { { { { { { $testing
+ } } } } } } }
+
+ Or even, perltidy -sobb -scbb -i=1 -bbt=2
+ {{{{{{{$testing
+ }}}}}}}
+
+
+ - Error message improved for conflicts due to -pbp; thanks to Djun Kim.
+
+ - Fixed RT #80645, error parsing special array name '@$' when used as
+ @{$} or $#{$}
+
+ - Eliminated the -chk debug flag which was included in version 20010406 to
+ do a one-time check for a bug with multi-line quotes. It has not been
+ needed since then.
+
+ - Numerous other minor formatting improvements.
+
+ 2012 07 14
+ - Added flag -iscl (--ignore-side-comment-lengths) which causes perltidy
+ to ignore the length of side comments when setting line breaks,
+ RT #71848. The default is to include the length of side comments when
+ breaking lines to stay within the length prescribed by the -l=n
+ maximum line length parameter. For example,
+
+ Default behavior on a single line with long side comment:
+ $vmsfile =~ s/;[\d\-]*$//
+ ; # Clip off version number; we can use a newer version as well
+
+ perltidy -iscl leaves the line intact:
+
+ $vmsfile =~ s/;[\d\-]*$//; # Clip off version number; we can use a newer version as well
+
+ - Fixed RT #78182, side effects with STDERR. Error handling has been
+ revised and the documentation has been updated. STDERR can now be
+ redirected to a string reference, and perltidy now returns an
+ error flag instead of calling die when input errors are detected.
+ If the error flag is set then no tidied output was produced.
+ See man Perl::Tidy for an example.
+
+ - Fixed RT #78156, erroneous warning message for package VERSION syntax.
+
+ - Added abbreviations -conv (--converge) to simplify iteration control.
+ -conv is equivalent to -it=4 and will insure that the tidied code is
+ converged to its final state with the minimum number of iterations.
+
+ - Minor formatting modifications have been made to insure convergence.
+
+ - Simplified and hopefully improved the method for guessing the starting
+ indentation level of entabbed code. Added flag -dt=n (--default_tabsize=n)
+ which might be helpful if the guessing method does not work well for
+ some editors.
+
+ - Added support for stacked labels, upper case X/B in hex and binary, and
+ CORE:: namespace.
+
+ - Eliminated warning messages for using keyword names as constants.
+
+ 2012 07 01
+ - Corrected problem introduced by using a chomp on scalar references, RT #77978
+
+ - Added support for Perl 5.14 package block syntax, RT #78114.
+
+ - A convergence test is made if three or more iterations are requested with
+ the -it=n parameter to avoid wasting computer time. Several hundred Mb of
+ code gleaned from the internet were searched with the results that:
+ - It is unusual for two iterations to be required unless a major
+ style change is being made.
+ - Only one case has been found where three iterations were required.
+ - No cases requiring four iterations have been found with this version.
+ For the previous version several cases where found the results could
+ oscillate between two semi-stable states. This version corrects this.
+
+ So if it is important that the code be converged it is okay to set -it=4
+ with this version and it will probably stop after the second iteration.
+
+ - Improved ability to identify and retain good line break points in the
+ input stream, such as at commas and equals. You can always tell
+ perltidy to ignore old breakpoints with -iob.
+
+ - Fixed glitch in which a terminal closing hash brace followed by semicolon
+ was not outdented back to the leading line depth like other closing
+ tokens. Thanks to Keith Neargarder for noting this.
+
+ OLD:
+ my ( $pre, $post ) = @{
+ {
+ "pp_anonlist" => [ "[", "]" ],
+ "pp_anonhash" => [ "{", "}" ]
+ }->{ $kid->ppaddr }
+ }; # terminal brace
+
+ NEW:
+ my ( $pre, $post ) = @{
+ {
+ "pp_anonlist" => [ "[", "]" ],
+ "pp_anonhash" => [ "{", "}" ]
+ }->{ $kid->ppaddr }
+ }; # terminal brace
+
+ - Removed extra indentation given to trailing 'if' and 'unless' clauses
+ without parentheses because this occasionally produced undesirable
+ results. This only applies where parens are not used after the if or
+ unless.
+
+ OLD:
+ return undef
+ unless my ( $who, $actions ) =
+ $clause =~ /^($who_re)((?:$action_re)+)$/o;
+
+ NEW:
+ return undef
+ unless my ( $who, $actions ) =
+ $clause =~ /^($who_re)((?:$action_re)+)$/o;
+
+ 2012 06 19
+ - Updated perltidy to handle all quote modifiers defined for perl 5 version 16.
+
+ - Side comment text in perltidyrc configuration files must now begin with
+ at least one space before the #. Thus:
+
+ OK:
+ -l=78 # Max line width is 78 cols
+ BAD:
+ -l=78# Max line width is 78 cols
+
+ This is probably true of almost all existing perltidyrc files,
+ but if you get an error message about bad parameters
+ involving a '#' the first time you run this version, please check the side
+ comments in your perltidyrc file, and add a space before the # if necessary.
+ You can quickly see the contents your perltidyrc file, if any, with the
+ command:
+
+ perltidy -dpro
+
+ The reason for this change is that some parameters naturally involve
+ the # symbol, and this can get interpreted as a side comment unless the
+ parameter is quoted. For example, to define -sphb=# it used to be necessary
+ to write
+ -sbcp='#'
+ to keep the # from becoming part of a comment. This was causing
+ trouble for new users. Now it can also be written without quotes:
+ -sbcp=#
+
+ - Fixed bug in processing some .perltidyrc files containing parameters with
+ an opening brace character, '{'. For example the following was
+ incorrectly processed:
+ --static-block-comment-prefix="^#{2,}[^\s#]"
+ Thanks to pdagosto.
+
+ - Added flag -boa (--break-at-old-attribute-breakpoints) which retains
+ any existing line breaks at attribute separation ':'. This is now the
+ default, use -nboa to deactivate. Thanks to Daphne Phister for the patch.
+ For example, given the following code, the line breaks at the ':'s will be
+ retained:
+
+ my @field
+ : field
+ : Default(1)
+ : Get('Name' => 'foo') : Set('Name');
+
+ whereas the previous version would have output a single line. If
+ the attributes are on a single line then they will remain on a single line.
+
+ - Added new flags --blank-lines-before-subs=n (-blbs=n) and
+ --blank-lines-before-packages=n (-blbp=n) to put n blank lines before
+ subs and packages. The old flag -bbs is now equivalent to -blbs=1 -blbp=1.
+ and -nbbs is equivalent to -blbs=0 -blbp=0. Requested by M. Schwern and
+ several others.
+
+ - Added feature -nsak='*' meaning no space between any keyword and opening
+ paren. This avoids listing entering a long list of keywords. Requested
+ by M. Schwern.
+
+ - Added option to delete a backup of original file with in-place-modify (-b)
+ if there were no errors. This can be requested with the flag -bext='/'.
+ See documentation for details. Requested by M. Schwern and others.
+
+ - Fixed bug where the module postfilter parameter was not applied when -b
+ flag was used. This was discovered during testing.
+
+ - Fixed in-place-modify (-b) to work with symbolic links to source files.
+ Thanks to Ted Johnson.
+
+ - Fixed bug where the Perl::Tidy module did not allow -b to be used
+ in some cases.
+
+ - No extra blank line is added before a comment which follows
+ a short line ending in an opening token, for example like this:
+ OLD:
+ if (
+
+ # unless we follow a blank or comment line
+ $last_line_leading_type !~ /^[#b]$/
+ ...
+
+ NEW:
+ if (
+ # unless we follow a blank or comment line
+ $last_line_leading_type !~ /^[#b]$/
+ ...
+
+ The blank is not needed for readability in these cases because there
+ already is already space above the comment. If a blank already
+ exists there it will not be removed, so this change should not
+ change code which has previously been formatted with perltidy.
+ Thanks to R.W.Stauner.
+
+ - Likewise, no extra blank line is added above a comment consisting of a
+ single #, since nothing is gained in readability.
+
+ - Fixed error in which a blank line was removed after a #>>> directive.
+ Thanks to Ricky Morse.
+
+ - Unnecessary semicolons after given/when/default blocks are now removed.
+
+ - Fixed bug where an unwanted blank line could be added before
+ pod text in __DATA__ or __END__ section. Thanks to jidani.
+
+ - Changed exit flags from 1 to 0 to indicate success for -help, -version,
+ and all -dump commands. Also added -? as another way to dump the help.
+ Requested by Keith Neargarder.
+
+ - Fixed bug where .ERR and .LOG files were not written except for -it=2 or more
+
+ - Fixed bug where trailing blank lines at the end of a file were dropped when
+ -it>1.
+
+ - Fixed bug where a line occasionally ended with an extra space. This reduces
+ rhe number of instances where a second iteration gives a result different
+ from the first.
+
+ - Updated documentation to note that the Tidy.pm module <stderr> parameter may
+ not be a reference to SCALAR or ARRAY; it must be a file.
+
+ - Syntax check with perl now work when the Tidy.pm module is processing
+ references to arrays and strings. Thanks to Charles Alderman.
+
+ - Zero-length files are no longer processed due to concerns for data loss
+ due to side effects in some scenarios.
+
+ - block labels, if any, are now included in closing side comment text
+ when the -csc flag is used. Suggested by Aaron. For example,
+ the label L102 in the following block is now included in the -csc text:
+
+ L102: for my $i ( 1 .. 10 ) {
+ ...
+ } ## end L102: for my $i ( 1 .. 10 )
+
+ 2010 12 17
+ - added new flag -it=n or --iterations=n
+ This flag causes perltidy to do n complete iterations.
+ For most purposes the default of n=1 should be satisfactory. However n=2
+ can be useful when a major style change is being made, or when code is being
+ beautified on check-in to a source code control system. The run time will be
+ approximately proportional to n, and it should seldom be necessary to use a
+ value greater than n=2. Thanks to Jonathan Swartz
+
+ - A configuration file pathname begins with three dots, e.g.
+ ".../.perltidyrc", indicates that the file should be searched for starting
+ in the current directory and working upwards. This makes it easier to have
+ multiple projects each with their own .perltidyrc in their root directories.
+ Thanks to Jonathan Swartz for this patch.
+
+ - Added flag --notidy which disables all formatting and causes the input to be
+ copied unchanged. This can be useful in conjunction with hierarchical
+ F<.perltidyrc> files to prevent unwanted tidying.
+ Thanks to Jonathan Swartz for this patch.
+
+ - Added prefilters and postfilters in the call to the Tidy.pm module.
+ Prefilters and postfilters. The prefilter is a code reference that
+ will be applied to the source before tidying, and the postfilter
+ is a code reference to the result before outputting.
+
+ Thanks to Jonathan Swartz for this patch. He writes:
+ This is useful for all manner of customizations. For example, I use
+ it to convert the 'method' keyword to 'sub' so that perltidy will work for
+ Method::Signature::Simple code:
+
+ Perl::Tidy::perltidy(
+ prefilter => sub { $_ = $_[0]; s/^method (.*)/sub $1 \#__METHOD/gm; return $_ },
+ postfilter => sub { $_ = $_[0]; s/^sub (.*?)\s* \#__METHOD/method $1/gm; return $_ }
+ );
+
+ - The starting indentation level of sections of code entabbed with -et=n
+ is correctly guessed if it was also produced with the same -et=n flag. This
+ keeps the indentation stable on repeated formatting passes within an editor.
+ Thanks to Sam Kington and Glenn.
+
+ - Functions with prototype '&' had a space between the function and opening
+ peren. This space now only occurs if the flag --space-function-paren (-sfp)
+ is set. Thanks to Zrajm Akfohg.
+
+ - Patch to never put spaces around a bare word in braces beginning with ^ as in:
+ my $before = ${^PREMATCH};
+ even if requested with the -bt=0 flag because any spaces cause a syntax error in perl.
+ Thanks to Fabrice Dulanoy.
+
+ 2009 06 16
+ - Allow configuration file to be 'perltidy.ini' for Windows systems.
+ i.e. C:\Documents and Settings\User\perltidy.ini
+ and added documentation for setting configuation file under Windows in man
+ page. Thanks to Stuart Clark.
+
+ - Corrected problem of unwanted semicolons in hash ref within given/when code.
+ Thanks to Nelo Onyiah.
+
+ - added new flag -cscb or --closing-side-comments-balanced
+ When using closing-side-comments, and the closing-side-comment-maximum-text
+ limit is exceeded, then the comment text must be truncated. Previous
+ versions of perltidy terminate with three dots, and this can still be
+ achieved with -ncscb:
+
+ perltidy -csc -ncscb
+
+ } ## end foreach my $foo (sort { $b cmp $a ...
+
+ However this causes a problem with older editors which cannot recognize
+ comments or are not configured to doso because they cannot "bounce" around in
+ the text correctly. The B<-cscb> flag tries to help them by
+ appending appropriate terminal balancing structure:
+
+ perltidy -csc -cscb
+
+ } ## end foreach my $foo (sort { $b cmp $a ... })
+
+ Since there is much to be gained and little to be lost by doing this,
+ the default is B<-cscb>. Use B<-ncscb> if you do not want this.
+
+ Thanks to Daniel Becker for suggesting this option.
+
+ - After an isolated closing eval block the continuation indentation will be
+ removed so that the braces line up more like other blocks. Thanks to Yves Orton.
+
+ OLD:
+ eval {
+ #STUFF;
+ 1; # return true
+ }
+ or do {
+ #handle error
+ };
+
+ NEW:
+ eval {
+ #STUFF;
+ 1; # return true
+ } or do {
+ #handle error
+ };
+
+ -A new flag -asbl (or --opening-anonymous-sub-brace-on-new-line) has
+ been added to put the opening brace of anonymous sub's on a new line,
+ as in the following snippet:
+
+ my $code = sub
+ {
+ my $arg = shift;
+ return $arg->(@_);
+ };
+
+ This was not possible before because the -sbl flag only applies to named
+ subs. Thanks to Benjamin Krupp.
+
+ -Fix tokenization bug with the following snippet
+ print 'hi' if { x => 1, }->{x};
+ which resulted in a semicolon being added after the comma. The workaround
+ was to use -nasc, but this is no longer necessary. Thanks to Brian Duggan.
+
+ -Fixed problem in which an incorrect error message could be triggered
+ by the (unusual) combination of parameters -lp -i=0 -l=2 -ci=0 for
+ example. Thanks to Richard Jelinek.
+
+ -A new flag --keep-old-blank-lines=n has been added to
+ give more control over the treatment of old blank lines in
+ a script. The manual has been revised to discuss the new
+ flag and clarify the treatment of old blank lines. Thanks
+ to Oliver Schaefer.
+
+ 2007 12 05
+ -Improved support for perl 5.10: New quote modifier 'p', new block type UNITCHECK,
+ new keyword break, improved formatting of given/when.
+
+ -Corrected tokenization bug of something like $var{-q}.
+
+ -Numerous minor formatting improvements.
+
+ -Corrected list of operators controlled by -baao -bbao to include
+ . : ? && || and or err xor
+
+ -Corrected very minor error in log file involving incorrect comment
+ regarding need for upper case of labels.
+
+ -Fixed problem where perltidy could run for a very long time
+ when given certain non-perl text files.
+
+ -Line breaks in un-parenthesized lists now try to follow
+ line breaks in the input file rather than trying to fill
+ lines. This usually works better, but if this causes
+ trouble you can use -iob to ignore any old line breaks.
+ Example for the following input snippet:
+
+ print
+ "conformability (Not the same dimension)\n",
+ "\t", $have, " is ", text_unit($hu), "\n",
+ "\t", $want, " is ", text_unit($wu), "\n",
+ ;
+
+ OLD:
+ print "conformability (Not the same dimension)\n", "\t", $have, " is ",
+ text_unit($hu), "\n", "\t", $want, " is ", text_unit($wu), "\n",;
+
+ NEW:
+ print "conformability (Not the same dimension)\n",
+ "\t", $have, " is ", text_unit($hu), "\n",
+ "\t", $want, " is ", text_unit($wu), "\n",
+ ;
+