# Thus baud setting = 26
# NOTE: If finer baud adjustment is needed see UARTx_C4 -> BRFA in the datasheet
# Baud fine setting = 0x02
-UARTConnectBaud = 26;
-UARTConnectBaudFine = 0x02;
+UARTConnectBaud = 1; # 4.5 Mbpsa @ 72 MHz
+UARTConnectBaudFine = 0x0;
+
+#UARTConnectBaud = 39; # 115385 bps @ 72 MHz (close to 115200)
+
+# Cable Check Command Length
+# This defines the length of the cable command
+# 0xD2 11010010 is used for each check byte
+#
+# For example:
+# Length: 4
+# Args: 0xD2 0xD2 0xD2 0xD2
+UARTConnectCableCheckLength => UARTConnectCableCheckLength_define;
+UARTConnectCableCheckLength = 2;
+
+# Connect Enable
+# Define used to indicate to non-connect modules that support should be compiled in
+ConnectEnabled => ConnectEnabled_define;
+ConnectEnabled = 1;