tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_opamp.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f3xx_hal_opamp.h
   4   * @author  MCD Application Team
   5   * @version V1.1.0
   6   * @date    12-Sept-2014
   7   * @brief   Header file of OPAMP HAL module.
   8   ******************************************************************************
   9   * @attention
  10   *
  11   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  12   *
  13   * Redistribution and use in source and binary forms, with or without modification,
  14   * are permitted provided that the following conditions are met:
  15   *   1. Redistributions of source code must retain the above copyright notice,
  16   *      this list of conditions and the following disclaimer.
  17   *   2. Redistributions in binary form must reproduce the above copyright notice,
  18   *      this list of conditions and the following disclaimer in the documentation
  19   *      and/or other materials provided with the distribution.
  20   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  21   *      may be used to endorse or promote products derived from this software
  22   *      without specific prior written permission.
  23   *
  24   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  27   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  28   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  29   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  30   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  31   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  32   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  33   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  34   *
  35   ******************************************************************************
  36   */
  37
  38 /* Define to prevent recursive inclusion -------------------------------------*/
  39 #ifndef __STM32F3xx_HAL_OPAMP_H
  40 #define __STM32F3xx_HAL_OPAMP_H
  41
  42 #ifdef __cplusplus
  43  extern "C" {
  44 #endif
  45
  46 #if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
  47     defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
  48     defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
  49     defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
  50
  51 /* Includes ------------------------------------------------------------------*/
  52 #include "stm32f3xx_hal_def.h"
  53
  54 /** @addtogroup STM32F3xx_HAL_Driver
  55   * @{
  56   */
  57
  58 /** @addtogroup OPAMP
  59   * @{
  60   */
  61
  62 /* Exported types ------------------------------------------------------------*/
  63 /** @defgroup OPAMP_Exported_Types OPAMP Exported Types
  64   * @{
  65   */
  66
  67 /**
  68   * @brief  OPAMP Init structure definition
  69   */
  70
  71 typedef struct
  72 {
  73   uint32_t Mode;                        /*!< Specifies the OPAMP mode
  74                                              This parameter must be a value of @ref OPAMP_Mode
  75                                              mode is either Standalone, - Follower or PGA */
  76
  77   uint32_t InvertingInput;              /*!< Specifies the inverting input in Standalone & Pga modes
  78                                                - In Standalone mode:   i.e when mode is OPAMP_STANDALONE_MODE
  79                                                  This parameter must be a value of @ref OPAMP_InvertingInput
  80                                                  InvertingInput is either VM0 or VM1
  81                                                - In PGA mode:          i.e when mode is OPAMP_PGA_MODE
  82                                                  & in Follower mode    i.e when mode is OPAMP_FOLLOWER_MODE
  83                                                  This parameter is Not Applicable */
  84
  85   uint32_t NonInvertingInput;           /*!< Specifies the non inverting input of the opamp:
  86                                              This parameter must be a value of @ref OPAMP_NonInvertingInput
  87                                              NonInvertingInput is either VP0, VP1, VP2 or VP3 */
  88
  89   uint32_t TimerControlledMuxmode;      /*!< Specifies if the Timer controlled Mux mode is enabled or disabled
  90                                              This parameter must be a value of @ref OPAMP_TimerControlledMuxmode */
  91
  92   uint32_t InvertingInputSecondary;     /*!< Specifies the inverting input (secondary) of the opamp when
  93                                              TimerControlledMuxmode is enabled
  94                                              i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
  95                                                - In Standalone mode:   i.e when mode is OPAMP_STANDALONE_MODE
  96                                                  This parameter must be a value of @ref OPAMP_InvertingInputSecondary
  97                                                  InvertingInputSecondary is either VM0 or VM1
  98                                                - In PGA mode:          i.e when mode is OPAMP_PGA_MODE
  99                                                  & in Follower mode    i.e when mode is OPAMP_FOLLOWER_MODE
 100                                                  This parameter is Not Applicable */
 101
 102   uint32_t NonInvertingInputSecondary;  /*!< Specifies the non inverting input (secondary) of the opamp when
 103                                              TimerControlledMuxmode is enabled
 104                                              i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
 105                                              This parameter must be a value of @ref OPAMP_NonInvertingInputSecondary
 106                                              NonInvertingInput is either VP0, VP1, VP2 or VP3 */
 107
 108   uint32_t PgaConnect;                  /*!< Specifies the inverting pin in PGA mode
 109                                              i.e. when mode is OPAMP_PGA_MODE
 110                                              This parameter must be a value of @ref OPAMP_PgaConnect
 111                                              Either: not connected, connected to VM0, connected to VM1
 112                                              (VM0 or VM1 are typically used for external filtering) */
 113
 114   uint32_t PgaGain;                     /*!< Specifies the gain in PGA mode
 115                                              i.e. when mode is OPAMP_PGA_MODE.
 116                                              This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */
 117
 118   uint32_t UserTrimming;                /*!< Specifies the trimming mode
 119                                              This parameter must be a value of @ref OPAMP_UserTrimming
 120                                              UserTrimming is either factory or user trimming */
 121
 122   uint32_t TrimmingValueP;              /*!< Specifies the offset trimming value (PMOS)
 123                                              i.e. when UserTrimming is OPAMP_TRIMMING_USER.
 124                                              This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
 125
 126   uint32_t TrimmingValueN;              /*!< Specifies the offset trimming value (NMOS)
 127                                              i.e. when UserTrimming is OPAMP_TRIMMING_USER.
 128                                              This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
 129
 130 }OPAMP_InitTypeDef;
 131
 132 /**
 133   * @brief  HAL State structures definition
 134   */
 135
 136 typedef enum
 137 {
 138   HAL_OPAMP_STATE_RESET               = 0x00000000, /*!< OPMAP is not yet Initialized          */
 139
 140   HAL_OPAMP_STATE_READY               = 0x00000001, /*!< OPAMP is initialized and ready for use */
 141   HAL_OPAMP_STATE_CALIBBUSY           = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */
 142
 143   HAL_OPAMP_STATE_BUSY                = 0x00000004, /*!< OPAMP is enabled and running in normal mode */
 144   HAL_OPAMP_STATE_BUSYLOCKED          = 0x00000005, /*!< OPAMP is locked
 145                                                          only system reset allows reconfiguring the opamp. */
 146
 147 }HAL_OPAMP_StateTypeDef;
 148
 149 /**
 150   * @brief OPAMP Handle Structure definition to @brief  OPAMP Handle Structure definition
 151   */
 152 typedef struct
 153 {
 154   OPAMP_TypeDef       *Instance;                    /*!< OPAMP instance's registers base address   */
 155   OPAMP_InitTypeDef   Init;                         /*!< OPAMP required parameters */
 156   HAL_StatusTypeDef Status;                         /*!< OPAMP peripheral status   */
 157   HAL_LockTypeDef   Lock;                           /*!< Locking object          */
 158   __IO HAL_OPAMP_StateTypeDef  State;               /*!< OPAMP communication state */
 159
 160 } OPAMP_HandleTypeDef;
 161
 162 /**
 163   * @brief OPAMP_TrimmingValueTypeDef @brief   definition
 164   */
 165
 166 typedef  uint32_t OPAMP_TrimmingValueTypeDef;
 167 /**
 168   * @}
 169   */
 170
 171 /* Exported constants --------------------------------------------------------*/
 172 /** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
 173   * @{
 174   */
 175
 176 /** @defgroup CSR_INIT CSR init register Mask
 177   * @{
 178   */
 179 /* Used for Init phase */
 180 #define OPAMP_CSR_UPDATE_PARAMETERS_INIT_MASK (OPAMP_CSR_TRIMOFFSETN | OPAMP_CSR_TRIMOFFSETP \
 181                                           | OPAMP_CSR_USERTRIM | OPAMP_CSR_PGGAIN | OPAMP_CSR_VPSSEL \
 182                                           | OPAMP_CSR_VMSSEL | OPAMP_CSR_TCMEN | OPAMP_CSR_VPSEL \
 183                                           | OPAMP_CSR_VPSEL | OPAMP_CSR_FORCEVP)
 184
 185 /**
 186   * @}
 187   */
 188
 189 /** @defgroup OPAMP_Mode OPAMP Mode
 190   * @{
 191   */
 192 #define OPAMP_STANDALONE_MODE            ((uint32_t)0x00000000) /*!< standalone mode */
 193 #define OPAMP_PGA_MODE                   OPAMP_CSR_VMSEL_1      /*!< PGA mode */
 194 #define OPAMP_FOLLOWER_MODE              OPAMP_CSR_VMSEL        /*!< follower mode */
 195
 196
 197 #define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
 198                                                ((INPUT) == OPAMP_PGA_MODE) || \
 199                                                ((INPUT) == OPAMP_FOLLOWER_MODE))
 200
 201 /**
 202   * @}
 203   */
 204
 205 /** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
 206   * @{
 207   */
 208
 209 #define OPAMP_NONINVERTINGINPUT_VP0         OPAMP_CSR_VPSEL                 /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)
 210                                                                                   connected to OPAMPx non inverting input */
 211 #define OPAMP_NONINVERTINGINPUT_VP1         ((uint32_t)0x00000000)          /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)
 212                                                                                   connected to OPAMPx non inverting input */
 213 #define OPAMP_NONINVERTINGINPUT_VP2         OPAMP_CSR_VPSEL_1               /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)
 214                                                                                   connected to OPAMPx non inverting input */
 215 #define OPAMP_NONINVERTINGINPUT_VP3         OPAMP_CSR_VPSEL_0               /*!< vp3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)
 216                                                                                   connected to OPAMPx non inverting input */
 217
 218 #define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_VP0) || \
 219                                             ((INPUT) == OPAMP_NONINVERTINGINPUT_VP1) || \
 220                                             ((INPUT) == OPAMP_NONINVERTINGINPUT_VP2) || \
 221                                             ((INPUT) == OPAMP_NONINVERTINGINPUT_VP3))
 222
 223 /**
 224   * @}
 225   */
 226
 227 /** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
 228   * @{
 229   */
 230
 231 #define IOPAMP_INVERTINGINPUT_VM0       ((uint32_t)0x00000000)            /*!< inverting input connected to VM0 */
 232 #define IOPAMP_INVERTINGINPUT_VM1         OPAMP_CSR_VMSEL_0           /*!< inverting input connected to VM1 */
 233
 234 #define IS_OPAMP_INVERTING_INPUT(INPUT) (((INPUT) == IOPAMP_INVERTINGINPUT_VM0) || \
 235                                          ((INPUT) == IOPAMP_INVERTINGINPUT_VM1))
 236
 237 /**
 238   * @}
 239   */
 240
 241 /** @defgroup OPAMP_TimerControlledMuxmode OPAMP Timer Controlled Mux mode
 242   * @{
 243   */
 244  #define OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE ((uint32_t)0x00000000)    /*!< Timer controlled Mux mode disabled */
 245  #define OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE  OPAMP_CSR_TCMEN           /*!< Timer controlled Mux mode enabled */
 246
 247  #define IS_OPAMP_TIMERCONTROLLED_MUXMODE(MUXMODE) (((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE) || \
 248                                                     ((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE))
 249 /**
 250   * @}
 251   */
 252
 253  /** @defgroup OPAMP_NonInvertingInputSecondary OPAMP Non Inverting Input Secondary
 254   * @{
 255   */
 256
 257 #define OPAMP_SEC_NONINVERTINGINPUT_VP0          OPAMP_CSR_VPSSEL       /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)
 258                                                                               connected to OPAMPx non inverting input */
 259 #define OPAMP_SEC_NONINVERTINGINPUT_VP1          ((uint32_t)0x00000000) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)
 260                                                                              connected to OPAMPx non inverting input */
 261 #define OPAMP_SEC_NONINVERTINGINPUT_VP2          OPAMP_CSR_VPSSEL_1     /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)
 262                                                                               connected to OPAMPx non inverting input */
 263 #define OPAMP_SEC_NONINVERTINGINPUT_VP3          OPAMP_CSR_VPSSEL_0     /*!< VP3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)
 264                                                                               connected to OPAMPx non inverting input */
 265
 266 #define IS_OPAMP_SEC_NONINVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP0) || \
 267                                                ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP1) || \
 268                                                ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP2) || \
 269                                                ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP3))
 270
 271 /**
 272   * @}
 273   */
 274
 275 /** @defgroup OPAMP_InvertingInputSecondary OPAMP Inverting Input Secondary
 276   * @{
 277   */
 278
 279 #define OPAMP_SEC_INVERTINGINPUT_VM0          ((uint32_t)0x00000000)    /*!< VM0 (PC5 for OPAMP1 and OPAMP2, PB10 for OPAMP3 and OPAMP4)
 280                                                                           connected to OPAMPx inverting input */
 281 #define OPAMP_SEC_INVERTINGINPUT_VM1          OPAMP_CSR_VMSSEL         /*!< VM1 (PA3 for OPAMP1, PA5 for OPAMP2, PB2 for OPAMP3, PD8 for OPAMP4)
 282                                                                          connected to OPAMPx inverting input */
 283
 284 #define IS_OPAMP_SEC_INVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_INVERTINGINPUT_VM0) || \
 285                                              ((INPUT) == OPAMP_SEC_INVERTINGINPUT_VM1))
 286
 287 /**
 288   * @}
 289   */
 290
 291 /** @defgroup OPAMP_PgaConnect OPAMP Pga Connect
 292   * @{
 293   */
 294
 295 #define OPAMP_PGACONNECT_NO               ((uint32_t)0x00000000)                    /*!< In PGA mode, the non inverting input is not connected */
 296 #define OPAMP_PGACONNECT_VM0               OPAMP_CSR_PGGAIN_3                       /*!< In PGA mode, the non inverting input is connected to VM0 */
 297 #define OPAMP_PGACONNECT_VM1              (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3) /*!< In PGA mode, the non inverting input is connected to VM1 */
 298
 299 #define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGACONNECT_NO)  || \
 300                                       ((CONNECT) == OPAMP_PGACONNECT_VM0) || \
 301                                       ((CONNECT) == OPAMP_PGACONNECT_VM1))
 302 /**
 303   * @}
 304   */
 305
 306
 307 /** @defgroup OPAMP_PgaGain OPAMP Pga Gain
 308   * @{
 309   */
 310
 311 #define OPAMP_PGA_GAIN_2                ((uint32_t)0x00000000)                        /*!< PGA gain =  2 */
 312 #define OPAMP_PGA_GAIN_4                OPAMP_CSR_PGGAIN_0                            /*!< PGA gain =  4 */
 313 #define OPAMP_PGA_GAIN_8                OPAMP_CSR_PGGAIN_1                            /*!< PGA gain =  8 */
 314 #define OPAMP_PGA_GAIN_16              (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1)      /*!< PGA gain = 16 */
 315
 316 #define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
 317                                  ((GAIN) == OPAMP_PGA_GAIN_4) || \
 318                                  ((GAIN) == OPAMP_PGA_GAIN_8) || \
 319                                  ((GAIN) == OPAMP_PGA_GAIN_16))
 320 /**
 321   * @}
 322   */
 323
 324 /** @defgroup OPAMP_UserTrimming OPAMP User Trimming
 325   * @{
 326   */
 327
 328 #define OPAMP_TRIMMING_FACTORY        ((uint32_t)0x00000000)                          /*!< Factory trimming */
 329 #define OPAMP_TRIMMING_USER           OPAMP_CSR_USERTRIM                              /*!< User trimming */
 330
 331 #define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
 332                                      ((TRIMMING) == OPAMP_TRIMMING_USER))
 333
 334 /** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
 335   * @{
 336   */
 337
 338 #define OPAMP_FACTORYTRIMMING_DUMMY    ((uint32_t)0xFFFFFFFF)                          /*!< Dummy trimming value */
 339
 340 #define OPAMP_FACTORYTRIMMING_N        ((uint32_t)0x00000000)                          /*!< Offset trimming N */
 341 #define OPAMP_FACTORYTRIMMING_P        ((uint32_t)0x00000001)                          /*!< Offset trimming P */
 342
 343 #define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
 344                                              ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
 345
 346 /**
 347   * @}
 348   */
 349
 350
 351 /** @defgroup OPAMP_TrimmingValue OPAMP Trimming Value
 352   * @{
 353   */
 354
 355 #define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1F)
 356
 357
 358 /**
 359   * @}
 360   */
 361
 362
 363 /** @defgroup OPAMP_Input OPAMP Input
 364   * @{
 365   */
 366
 367 #define OPAMP_INPUT_INVERTING                 ((uint32_t) 24) /*!< Inverting input */
 368 #define OPAMP_INPUT_NONINVERTING              ((uint32_t) 19) /*!< Non inverting input */
 369
 370 #define IS_OPAMP_INPUT(INPUT) (((INPUT) == OPAMP_INPUT_INVERTING) || \
 371                                ((INPUT) == OPAMP_INPUT_NONINVERTING))
 372 /**
 373   * @}
 374   */
 375
 376
 377 /** @defgroup OPAMP_VREF OPAMP VREF
 378   * @{
 379   */
 380
 381 #define OPAMP_VREF_3VDDA                    ((uint32_t)0x00000000)  /*!< OPMAP Vref = 3.3% VDDA */
 382 #define OPAMP_VREF_10VDDA                    OPAMP_CSR_CALSEL_0     /*!< OPMAP Vref = 10% VDDA  */
 383 #define OPAMP_VREF_50VDDA                    OPAMP_CSR_CALSEL_1     /*!< OPMAP Vref = 50% VDDA  */
 384 #define OPAMP_VREF_90VDDA                    OPAMP_CSR_CALSEL       /*!< OPMAP Vref = 90% VDDA  */
 385
 386 #define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA)  || \
 387                              ((VREF) == OPAMP_VREF_10VDDA) || \
 388                              ((VREF) == OPAMP_VREF_50VDDA) || \
 389                              ((VREF) == OPAMP_VREF_90VDDA))
 390
 391 /**
 392   * @}
 393   */
 394
 395  /** @defgroup OPAMP_Vref2ADCforCalib OPAMP Vref2ADCforCalib
 396   */
 397
 398 #define OPAMP_VREF_NOTCONNECTEDTO_ADC          ((uint32_t)0x00000000) /*!< VREF not connected to ADC */
 399 #define OPAMP_VREF_CONNECTEDTO_ADC             ((uint32_t)0x00000001) /*!< VREF not connected to ADC */
 400
 401 #define IS_OPAMP_ALLOPAMPVREF_CONNECT(CONNECT) (((CONNECT) == OPAMP_VREF_NOTCONNECTEDTO_ADC) || \
 402                                                 ((CONNECT) == OPAMP_VREF_CONNECTEDTO_ADC))
 403
 404
 405  /**
 406   * @}
 407   */
 408
 409  /**
 410   * @}
 411   */
 412
 413 /* Exported macros -----------------------------------------------------------*/
 414 /** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
 415   * @{
 416   */
 417
 418 /** @brief Reset OPAMP handle state
 419   * @param  __HANDLE__: OPAMP handle.
 420   * @retval None
 421   */
 422 #define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
 423
 424 /**
 425   * @}
 426   */
 427
 428 /* Include OPAMP HAL Extended module */
 429 #include "stm32f3xx_hal_opamp_ex.h"
 430
 431 /* Exported functions --------------------------------------------------------*/
 432 /** @defgroup OPAMP_Exported_Functions OPAMP Exported Functions
 433   * @{
 434   */
 435
 436 /** @defgroup OPAMP_Exported_Functions_Group1 Initialization and de-initialization functions
 437   * @{
 438   */
 439
 440 /* Initialization/de-initialization functions  **********************************/
 441 HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
 442 HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
 443 void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
 444 void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
 445 /**
 446   * @}
 447   */
 448
 449
 450 /** @defgroup OPAMP_Exported_Functions_Group2 Input and Output operation functions
 451   * @{
 452   */
 453
 454 /* I/O operation functions  *****************************************************/
 455 HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
 456 HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
 457 HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp);
 458
 459 /**
 460   * @}
 461   */
 462
 463 /** @defgroup OPAMP_Exported_Functions_Group3 Peripheral Control functions
 464   * @{
 465   */
 466
 467 /* Peripheral Control functions  ************************************************/
 468 HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
 469
 470 /**
 471   * @}
 472   */
 473
 474 /** @defgroup OPAMP_Exported_Functions_Group4 Peripheral State functions
 475   * @{
 476   */
 477
 478 /* Peripheral State functions  **************************************************/
 479 HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
 480 OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
 481
 482 /**
 483   * @}
 484   */
 485
 486 /**
 487   * @}
 488   */
 489
 490 /**
 491   * @}
 492   */
 493
 494 /**
 495   * @}
 496   */
 497
 498 #endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
 499        /* STM32F302xC || STM32F303xC || STM32F358xx || */
 500        /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
 501        /* STM32F301x8 || STM32F302x8 || STM32F318xx    */
 502
 503 #ifdef __cplusplus
 504 }
 505 #endif
 506
 507 #endif /* __STM32F3xx_HAL_OPAMP_H */
 508
 509 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/