1 # Hey Emacs, this is a -*- makefile -*-
2 #----------------------------------------------------------------------------
3 # WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al.
5 # Released to the Public Domain
7 # Additional material for this makefile was written by:
17 #----------------------------------------------------------------------------
20 # make all = Make software.
22 # make clean = Clean out built project files.
24 # make coff = Convert ELF to AVR COFF.
26 # make extcoff = Convert ELF to AVR Extended COFF.
28 # make program = Download the hex file to the device.
29 # Please customize your programmer settings(PROGRAM_CMD)
31 # make teensy = Download the hex file to the device, using teensy_loader_cli.
32 # (must have teensy_loader_cli installed).
34 # make dfu = Download the hex file to the device, using dfu-programmer (must
35 # have dfu-programmer installed).
37 # make flip = Download the hex file to the device, using Atmel FLIP (must
38 # have Atmel FLIP installed).
40 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
41 # (must have dfu-programmer installed).
43 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
44 # (must have Atmel FLIP installed).
46 # make debug = Start either simulavr or avarice as specified for debugging,
47 # with avr-gdb or avr-insight as the front end for debugging.
49 # make filename.s = Just compile filename.c into the assembler code only.
51 # make filename.i = Create a preprocessed source file for use in submitting
52 # bug reports to the GCC project.
54 # To rebuild project do "make clean" then "make all".
55 #----------------------------------------------------------------------------
58 # Output format. (can be srec, ihex, binary)
63 # Object files directory
64 # To put object files in current directory, use a dot (.), do NOT make
65 # this an empty or blank macro!
66 OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
69 # Optimization level, can be [0, 1, 2, 3, s].
70 # 0 = turn off optimization. s = optimize for size.
71 # (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
76 # Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
77 # AVR Studio 4.10 requires dwarf-2.
78 # AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
86 ERROR_COLOR=\033[31;01m
87 WARN_COLOR=\033[33;01m
92 ifneq ($(shell awk --version 2>/dev/null),)
98 OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
99 ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
100 WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
106 TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
107 TAB_LOG_PLAIN = printf "$$LOG\n"
108 AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
109 AWK_CMD = $(AWK) '{ printf "%-69s", $$0; }'
110 PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
111 PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
112 PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
113 PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
114 PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
115 BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
117 # List any extra directories to look for include files here.
118 # Each directory must be seperated by a space.
119 # Use forward slashes for directory separators.
120 # For a directory that has spaces, enclose it in quotes.
121 EXTRAINCDIRS = $(subst :, ,$(VPATH))
124 # Compiler flag to set the C Standard level.
126 # gnu89 = c89 plus GCC extensions
127 # c99 = ISO C99 standard (not yet fully implemented)
128 # gnu99 = c99 plus GCC extensions
129 CSTANDARD = -std=gnu99
132 # Place -D or -U options here for C sources
133 CDEFS = -DF_CPU=$(F_CPU)UL
137 # Place -D or -U options here for ASM sources
138 ADEFS = -DF_CPU=$(F_CPU)
142 # Place -D or -U options here for C++ sources
143 CPPDEFS = -DF_CPU=$(F_CPU)UL
144 #CPPDEFS += -D__STDC_LIMIT_MACROS
145 #CPPDEFS += -D__STDC_CONSTANT_MACROS
146 CPPDEFS += $(OPT_DEFS)
150 #---------------- Compiler Options C ----------------
151 # -g*: generate debugging information
152 # -O*: optimization level
153 # -f...: tuning, see GCC manual and avr-libc documentation
154 # -Wall...: warning level
155 # -Wa,...: tell GCC to pass this to the assembler.
156 # -adhlns...: create assembler listing
160 CFLAGS += -funsigned-char
161 CFLAGS += -funsigned-bitfields
162 CFLAGS += -ffunction-sections
163 CFLAGS += -fdata-sections
164 CFLAGS += -fno-inline-small-functions
165 CFLAGS += -fpack-struct
166 CFLAGS += -fshort-enums
167 CFLAGS += -fno-strict-aliasing
170 ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
171 CFLAGS+= -fdiagnostics-color
172 else ifeq ("$(echo "int main(){}" | $(CC) -fcolor-diagnostics -x c - -o /dev/null 2>&1)", "")
173 CFLAGS+= -fcolor-diagnostics
177 CFLAGS += -Wstrict-prototypes
178 #CFLAGS += -mshort-calls
179 #CFLAGS += -fno-unit-at-a-time
181 #CFLAGS += -Wunreachable-code
182 #CFLAGS += -Wsign-compare
183 CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
184 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
185 CFLAGS += $(CSTANDARD)
187 CFLAGS += -include $(CONFIG_H)
191 #---------------- Compiler Options C++ ----------------
192 # -g*: generate debugging information
193 # -O*: optimization level
194 # -f...: tuning, see GCC manual and avr-libc documentation
195 # -Wall...: warning level
196 # -Wa,...: tell GCC to pass this to the assembler.
197 # -adhlns...: create assembler listing
198 CPPFLAGS = -g$(DEBUG)
199 CPPFLAGS += $(CPPDEFS)
201 CPPFLAGS += -funsigned-char
202 CPPFLAGS += -funsigned-bitfields
203 CPPFLAGS += -fpack-struct
204 CPPFLAGS += -fshort-enums
205 CPPFLAGS += -fno-exceptions
206 CPPFLAGS += -ffunction-sections
207 CPPFLAGS += -fdata-sections
208 # to supress "warning: only initialized variables can be placed into program memory area"
212 #CPPFLAGS += -mshort-calls
213 #CPPFLAGS += -fno-unit-at-a-time
214 #CPPFLAGS += -Wstrict-prototypes
215 #CPPFLAGS += -Wunreachable-code
216 #CPPFLAGS += -Wsign-compare
217 CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
218 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
219 #CPPFLAGS += $(CSTANDARD)
221 CPPFLAGS += -include $(CONFIG_H)
225 #---------------- Assembler Options ----------------
226 # -Wa,...: tell GCC to pass this to the assembler.
227 # -adhlns: create listing
228 # -gstabs: have the assembler create line number information; note that
229 # for use in COFF files, additional information about filenames
230 # and function names needs to be present in the assembler source
231 # files -- see avr-libc docs [FIXME: not yet described there]
232 # -listing-cont-lines: Sets the maximum number of continuation lines of hex
233 # dump that will be displayed for a given single line of source input.
234 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
235 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
237 ASFLAGS += -include $(CONFIG_H)
240 #---------------- Library Options ----------------
241 # Minimalistic printf version
242 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
244 # Floating point printf version (requires MATH_LIB = -lm below)
245 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
247 # If this is left blank, then it will use the Standard printf version.
249 #PRINTF_LIB = $(PRINTF_LIB_MIN)
250 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
253 # Minimalistic scanf version
254 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
256 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
257 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
259 # If this is left blank, then it will use the Standard scanf version.
261 #SCANF_LIB = $(SCANF_LIB_MIN)
262 #SCANF_LIB = $(SCANF_LIB_FLOAT)
268 # List any extra directories to look for libraries here.
269 # Each directory must be seperated by a space.
270 # Use forward slashes for directory separators.
271 # For a directory that has spaces, enclose it in quotes.
276 #---------------- External Memory Options ----------------
278 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
279 # used for variables (.data/.bss) and heap (malloc()).
280 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
282 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
283 # only used for heap (malloc()).
284 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
290 #---------------- Linker Options ----------------
291 # -Wl,...: tell GCC to pass this to linker.
292 # -Map: create map file
293 # --cref: add cross reference to map file
295 # Comennt out "--relax" option to avoid a error such:
296 # (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
298 LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
299 #LDFLAGS += -Wl,--relax
300 LDFLAGS += -Wl,--gc-sections
301 LDFLAGS += $(EXTMEMOPTS)
302 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
303 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
304 #LDFLAGS += -T linker_script.x
305 # You can give EXTRALDFLAGS at 'make' command line.
306 LDFLAGS += $(EXTRALDFLAGS)
310 #---------------- Debugging Options ----------------
312 # For simulavr only - target MCU frequency.
313 DEBUG_MFREQ = $(F_CPU)
315 # Set the DEBUG_UI to either gdb or insight.
319 # Set the debugging back-end to either avarice, simulavr.
320 DEBUG_BACKEND = avarice
321 #DEBUG_BACKEND = simulavr
324 GDBINIT_FILE = __avr_gdbinit
326 # When using avarice settings for the JTAG
329 # Debugging port used to communicate between GDB / avarice / simulavr.
332 # Debugging host used to communicate between GDB / avarice / simulavr, normally
333 # just set to localhost unless doing some sort of crazy debugging when
334 # avarice is running on a different computer.
335 DEBUG_HOST = localhost
339 #============================================================================
342 # Define programs and commands.
345 OBJCOPY = avr-objcopy
346 OBJDUMP = avr-objdump
354 SECHO = $(SILENT) || echo
355 # Autodecct teensy loader
356 ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
357 TEENSY_LOADER_CLI = teensy-loader-cli
359 TEENSY_LOADER_CLI = teensy_loader_cli
364 MSG_ERRORS_NONE = Errors: none
365 MSG_BEGIN = -------- begin --------
366 MSG_END = -------- end --------
367 MSG_SIZE_BEFORE = Size before:
368 MSG_SIZE_AFTER = Size after:
369 MSG_COFF = Converting to AVR COFF:
370 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
371 MSG_FLASH = Creating load file for Flash:
372 MSG_EEPROM = Creating load file for EEPROM:
373 MSG_EXTENDED_LISTING = Creating Extended Listing:
374 MSG_SYMBOL_TABLE = Creating Symbol Table:
375 MSG_LINKING = Linking:
376 MSG_COMPILING = Compiling:
377 MSG_COMPILING_CPP = Compiling:
378 MSG_ASSEMBLING = Assembling:
379 MSG_CLEANING = Cleaning project:
380 MSG_CREATING_LIBRARY = Creating library:
385 # Define all object files.
386 OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
388 # Define all listing files.
389 LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
392 # Compiler flags to generate dependency files.
393 #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
394 GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
397 # Combine all necessary flags and optional flags.
398 # Add target processor to flags.
399 # You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
400 ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
401 ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
402 ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
409 @$(MAKE) clean_list # force clean each time
414 # Quick make that doesn't clean
423 # Change the build target to build a HEX file or a library.
425 #build: elf hex eep lss sym
429 elf: $(BUILD_DIR)/$(TARGET).elf
430 hex: $(BUILD_DIR)/$(TARGET).hex
431 eep: $(BUILD_DIR)/$(TARGET).eep
432 lss: $(BUILD_DIR)/$(TARGET).lss
433 sym: $(BUILD_DIR)/$(TARGET).sym
434 LIBNAME=lib$(TARGET).a
440 # AVR Studio 3.x does not check make's exit code but relies on
441 # the following magic strings to be generated by the compile job.
443 @$(SECHO) $(MSG_BEGIN)
449 # Display size of file.
450 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
451 #ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
452 ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf
455 @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
456 2>/dev/null; $(SECHO); fi
459 @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
460 2>/dev/null; $(SECHO); fi
461 # test file sizes eventually
462 # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
464 # Display compiler version information.
466 @$(SILENT) || $(CC) --version
470 # Program the device.
471 program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
474 teensy: $(BUILD_DIR)/$(TARGET).hex
475 $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
477 flip: $(BUILD_DIR)/$(TARGET).hex
478 batchisp -hardware usb -device $(MCU) -operation erase f
479 batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
480 batchisp -hardware usb -device $(MCU) -operation start reset 0
482 dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
483 ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
484 dfu-programmer $(MCU) erase --force
486 dfu-programmer $(MCU) erase
488 dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
489 dfu-programmer $(MCU) reset
492 ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
493 dfu-programmer $(MCU) erase --force
495 dfu-programmer $(MCU) erase
497 dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
498 dfu-programmer $(MCU) reset
501 dfu-programmer $(MCU) reset
502 dfu-programmer $(MCU) start
504 flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
505 $(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
506 batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
507 batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
508 batchisp -hardware usb -device $(MCU) -operation start reset 0
509 $(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
511 dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
512 ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
513 dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
515 dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
517 dfu-programmer $(MCU) reset
520 # Generate avr-gdb config/init file which does the following:
521 # define the reset signal, load the target file, connect to target, and set
522 # a breakpoint at main().
524 @$(REMOVE) $(GDBINIT_FILE)
525 @echo define reset >> $(GDBINIT_FILE)
526 @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
527 @echo end >> $(GDBINIT_FILE)
528 @echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
529 @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
530 ifeq ($(DEBUG_BACKEND),simulavr)
531 @echo load >> $(GDBINIT_FILE)
533 @echo break main >> $(GDBINIT_FILE)
535 debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
536 ifeq ($(DEBUG_BACKEND), avarice)
537 @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
538 @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
539 $(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
540 @$(WINSHELL) /c pause
543 @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
544 $(DEBUG_MFREQ) --port $(DEBUG_PORT)
546 @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
551 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
552 COFFCONVERT = $(OBJCOPY) --debugging
553 COFFCONVERT += --change-section-address .data-0x800000
554 COFFCONVERT += --change-section-address .bss-0x800000
555 COFFCONVERT += --change-section-address .noinit-0x800000
556 COFFCONVERT += --change-section-address .eeprom-0x810000
560 coff: $(BUILD_DIR)/$(TARGET).elf
561 @$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
562 $(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
565 extcoff: $(BUILD_DIR)/$(TARGET).elf
566 @$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
567 $(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
571 # Create final output files (.hex, .eep) from ELF output file.
573 @$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
574 $(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
576 @$(COPY) $@ $(TARGET).hex
577 $(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
578 $(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
582 @$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
583 $(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
586 # Create extended listing file from ELF output file.
588 @$(SILENT) || printf "$(MSG_EXTENDED_LISTING) $@" | $(AWK_CMD)
589 $(eval CMD=$(OBJDUMP) -h -S -z $< > $@)
592 # Create a symbol table from ELF output file.
594 @$(SILENT) || printf "$(MSG_SYMBOL_TABLE) $@" | $(AWK_CMD)
595 $(eval CMD=$(NM) -n $< > $@ )
598 # Create library from object files.
599 .SECONDARY : $(BUILD_DIR)/$(TARGET).a
602 @$(SILENT) || printf "$(MSG_CREATING_LIBRARY) $@" | $(AWK_CMD)
603 $(eval CMD=$(AR) $@ $(OBJ) )
606 # Link: create ELF output file from object files.
607 .SECONDARY : $(BUILD_DIR)/$(TARGET).elf
610 @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
611 $(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
614 # Compile: create object files from C source files.
617 @$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
618 $(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
621 # Compile: create object files from C++ source files.
622 $(OBJDIR)/%.o : %.cpp
624 @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
625 $(CC) -c $(ALL_CPPFLAGS) $< -o $@
628 # Compile: create assembler files from C source files.
630 @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
631 $(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
634 # Compile: create assembler files from C++ source files.
636 @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
637 $(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
640 # Assemble: create object files from assembler source files.
643 @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
644 $(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
647 # Create preprocessed source for use in sending a bug report.
649 $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
651 # Target: clean project.
652 clean: begin clean_list end
655 $(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
656 $(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
657 $(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
663 SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
664 all-keyboards-defaults:
665 @for x in $(SUBDIRS) ; do \
666 printf "Compiling with default: $$x" | $(AWK_CMD); \
667 LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
670 KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
671 all-keyboards: $(KEYBOARDS)
673 $(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
674 $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
675 @for x in $(KEYMAPS) ; do \
676 printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-88s", $$0; }'; \
677 LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
681 $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
682 @for x in $(KEYMAPS) ; do \
683 printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-88s", $$0; }'; \
684 LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
687 # Create build directory
688 $(shell mkdir $(BUILD_DIR) 2>/dev/null)
690 # Create object files directory
691 $(shell mkdir $(OBJDIR) 2>/dev/null)
694 # Include the dependency files.
695 -include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
698 # Listing of phony targets.
699 .PHONY : all quick begin finish end sizebefore sizeafter gccversion \
700 build elf hex eep lss sym coff extcoff \
701 clean clean_list debug gdb-config show_path \
702 program teensy dfu flip dfu-ee flip-ee dfu-start \
703 all-keyboards-defaults all-keyboards all-keymaps