2 * This software is experimental and a work in progress.
3 * Under no circumstances should these files be used in relation to any critical system(s).
4 * Use of these files is at your own risk.
6 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
7 * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
8 * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
9 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
10 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
11 * DEALINGS IN THE SOFTWARE.
13 * This files are free to use from http://engsta.com/stm32-flash-memory-eeprom-emulator/ by
16 * Modifications for QMK and STM32F303 by Yiancar
18 * This library assumes 8-bit data locations. To add a new MCU, please provide the flash
19 * page size and the total flash size in Kb. The number of available pages must be a multiple
20 * of 2. Only half of the pages account for the total EEPROM size.
21 * This library also assumes that the pages are not used by the firmware.
29 #include "flash_stm32.h"
31 // HACK ALERT. This definition may not match your processor
32 // To Do. Work out correct value for EEPROM_PAGE_SIZE on the STM32F103CT6 etc
33 #if defined(EEPROM_EMU_STM32F303xC)
34 #define MCU_STM32F303CC
35 #elif defined(EEPROM_EMU_STM32F103xB)
36 #define MCU_STM32F103RB
37 #elif defined(EEPROM_EMU_STM32F072xB)
38 #define MCU_STM32F072CB
40 #error "not implemented."
43 #ifndef EEPROM_PAGE_SIZE
44 #if defined (MCU_STM32F103RB)
45 #define FEE_PAGE_SIZE (uint16_t)0x400 // Page size = 1KByte
46 #define FEE_DENSITY_PAGES 2 // How many pages are used
47 #elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE) || defined (MCU_STM32F103RD) || defined (MCU_STM32F303CC) || defined(MCU_STM32F072CB)
48 #define FEE_PAGE_SIZE (uint16_t)0x800 // Page size = 2KByte
49 #define FEE_DENSITY_PAGES 4 // How many pages are used
51 #error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
55 #ifndef EEPROM_START_ADDRESS
56 #if defined (MCU_STM32F103RB) || defined(MCU_STM32F072CB)
57 #define FEE_MCU_FLASH_SIZE 128 // Size in Kb
58 #elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE)
59 #define FEE_MCU_FLASH_SIZE 512 // Size in Kb
60 #elif defined (MCU_STM32F103RD)
61 #define FEE_MCU_FLASH_SIZE 384 // Size in Kb
62 #elif defined (MCU_STM32F303CC)
63 #define FEE_MCU_FLASH_SIZE 256 // Size in Kb
65 #error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
70 // Choose location for the first EEPROM Page address on the top of flash
71 #define FEE_PAGE_BASE_ADDRESS ((uint32_t)(0x8000000 + FEE_MCU_FLASH_SIZE * 1024 - FEE_DENSITY_PAGES * FEE_PAGE_SIZE))
72 #define FEE_DENSITY_BYTES ((FEE_PAGE_SIZE / 2) * FEE_DENSITY_PAGES - 1)
73 #define FEE_LAST_PAGE_ADDRESS (FEE_PAGE_BASE_ADDRESS + (FEE_PAGE_SIZE * FEE_DENSITY_PAGES))
74 #define FEE_EMPTY_WORD ((uint16_t)0xFFFF)
75 #define FEE_ADDR_OFFSET(Address)(Address * 2) // 1Byte per Word will be saved to preserve Flash
77 // Use this function to initialize the functionality
78 uint16_t EEPROM_Init(void);
79 void EEPROM_Erase (void);
80 uint16_t EEPROM_WriteDataByte (uint16_t Address, uint8_t DataByte);
81 uint8_t EEPROM_ReadDataByte (uint16_t Address);
83 #endif /* __EEPROM_H */