tmk_core/common/avr/suspend.c

   1 #include <stdbool.h>
   2 #include <avr/sleep.h>
   3 #include <avr/wdt.h>
   4 #include <avr/interrupt.h>
   5 #include "matrix.h"
   6 #include "action.h"
   7 #include "backlight.h"
   8 #include "suspend_avr.h"
   9 #include "suspend.h"
  10 #include "timer.h"
  11 #include "led.h"
  12
  13 #ifdef PROTOCOL_LUFA
  14         #include "lufa.h"
  15 #endif
  16
  17 #ifdef AUDIO_ENABLE
  18     #include "audio.h"
  19 #endif /* AUDIO_ENABLE */
  20
  21
  22
  23 #define wdt_intr_enable(value)   \
  24 __asm__ __volatile__ (  \
  25     "in __tmp_reg__,__SREG__" "\n\t"    \
  26     "cli" "\n\t"    \
  27     "wdr" "\n\t"    \
  28     "sts %0,%1" "\n\t"  \
  29     "out __SREG__,__tmp_reg__" "\n\t"   \
  30     "sts %0,%2" "\n\t" \
  31     : /* no outputs */  \
  32     : "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
  33     "r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
  34     "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
  35         _BV(WDIE) | (value & 0x07)) ) \
  36     : "r0"  \
  37 )
  38
  39
  40 void suspend_idle(uint8_t time)
  41 {
  42     cli();
  43     set_sleep_mode(SLEEP_MODE_IDLE);
  44     sleep_enable();
  45     sei();
  46     sleep_cpu();
  47     sleep_disable();
  48 }
  49
  50 /* Power down MCU with watchdog timer
  51  * wdto: watchdog timer timeout defined in <avr/wdt.h>
  52  *          WDTO_15MS
  53  *          WDTO_30MS
  54  *          WDTO_60MS
  55  *          WDTO_120MS
  56  *          WDTO_250MS
  57  *          WDTO_500MS
  58  *          WDTO_1S
  59  *          WDTO_2S
  60  *          WDTO_4S
  61  *          WDTO_8S
  62  */
  63 static uint8_t wdt_timeout = 0;
  64 static void power_down(uint8_t wdto)
  65 {
  66 #ifdef PROTOCOL_LUFA
  67     if (USB_DeviceState == DEVICE_STATE_Configured) return;
  68 #endif
  69     wdt_timeout = wdto;
  70
  71     // Watchdog Interrupt Mode
  72     wdt_intr_enable(wdto);
  73
  74 #ifdef BACKLIGHT_ENABLE
  75         backlight_set(0);
  76 #endif
  77
  78         // Turn off LED indicators
  79         led_set(0);
  80
  81         #ifdef AUDIO_ENABLE
  82         // This sometimes disables the start-up noise, so it's been disabled
  83                 // stop_all_notes();
  84         #endif /* AUDIO_ENABLE */
  85
  86     // TODO: more power saving
  87     // See PicoPower application note
  88     // - I/O port input with pullup
  89     // - prescale clock
  90     // - BOD disable
  91     // - Power Reduction Register PRR
  92     set_sleep_mode(SLEEP_MODE_PWR_DOWN);
  93     sleep_enable();
  94     sei();
  95     sleep_cpu();
  96     sleep_disable();
  97
  98     // Disable watchdog after sleep
  99     wdt_disable();
 100 }
 101
 102 void suspend_power_down(void)
 103 {
 104     power_down(WDTO_15MS);
 105 }
 106
 107 __attribute__ ((weak)) void matrix_power_up(void) {}
 108 __attribute__ ((weak)) void matrix_power_down(void) {}
 109 bool suspend_wakeup_condition(void)
 110 {
 111 #ifdef BACKLIGHT_ENABLE
 112     backlight_set(0);
 113 #endif
 114     matrix_power_up();
 115     matrix_scan();
 116     matrix_power_down();
 117     if (matrix_key_count()) return true;
 118     return false;
 119 }
 120
 121 // run immediately after wakeup
 122 void suspend_wakeup_init(void)
 123 {
 124     // clear keyboard state
 125     clear_keyboard();
 126 #ifdef BACKLIGHT_ENABLE
 127     backlight_set(0);
 128     backlight_init();
 129 #endif
 130 led_set(host_keyboard_leds());
 131 }
 132
 133 #ifndef NO_SUSPEND_POWER_DOWN
 134 /* watchdog timeout */
 135 ISR(WDT_vect)
 136 {
 137     // compensate timer for sleep
 138     switch (wdt_timeout) {
 139         case WDTO_15MS:
 140             timer_count += 15 + 2;  // WDTO_15MS + 2(from observation)
 141             break;
 142         default:
 143             ;
 144     }
 145 }
 146 #endif