]> git.donarmstrong.com Git - qmk_firmware.git/blob - lib/lufa/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt
Merge pull request #1471 from qmk/lufa_lib
[qmk_firmware.git] / lib / lufa / Demos / Host / LowLevel / StillImageHost / StillImageHost.txt
1 /** \file
2  *
3  *  This file contains special DoxyGen information for the generation of the main page and other special
4  *  documentation pages. It is not a project source file.
5  */
6
7 /** \mainpage Still Image Host Demo
8  *
9  *  \section Sec_Compat Demo Compatibility:
10  *
11  *  The following list indicates what microcontrollers are compatible with this demo.
12  *
13  *  \li Series 7 USB AVRs (AT90USBxxx7)
14  *
15  *  \section Sec_Info USB Information:
16  *
17  *  The following table gives a rundown of the USB utilization of this demo.
18  *
19  *  <table>
20  *   <tr>
21  *    <td><b>USB Mode:</b></td>
22  *    <td>Host</td>
23  *   </tr>
24  *   <tr>
25  *    <td><b>USB Class:</b></td>
26  *    <td>Still Image Device</td>
27  *   </tr>
28  *   <tr>
29  *    <td><b>USB Subclass:</b></td>
30  *    <td>N/A</td>
31  *   </tr>
32  *   <tr>
33  *    <td><b>Relevant Standards:</b></td>
34  *    <td>USBIF Still Image Class Specification \n
35  *        PIMA 15740 Specification</td>
36  *   </tr>
37  *   <tr>
38  *    <td><b>Supported USB Speeds:</b></td>
39  *    <td>Full Speed Mode</td>
40  *   </tr>
41  *  </table>
42  *
43  *  \section Sec_Description Project Description:
44  *
45  *  Still Image host demonstration application. This gives a simple reference
46  *  application for implementing a Still Image host, for USB devices such as
47  *  digital cameras.
48  *
49  *  This demo will enumerate an attached USB Still Image device, print out its
50  *  information structure, open a session with the device and finally close the
51  *  session.
52  *
53  *  \section Sec_Options Project Options
54  *
55  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
56  *
57  *  <table>
58  *   <tr>
59  *    <td>
60  *     None
61  *    </td>
62  *   </tr>
63  *  </table>
64  */
65