2 Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
20 #include "config_common.h"
22 /* USB Device descriptor parameter */
23 #define VENDOR_ID 0xFEED
24 #define PRODUCT_ID 0x0000
25 #define DEVICE_VER 0x0001
26 #define MANUFACTURER RedScarf
27 #define PRODUCT RedScarfII+
28 #define DESCRIPTION QMK Firmware for the RedScarf II+
32 #define MATRIX_COLS 15
36 * Keyboard Matrix Assignments
38 * Change this to how you wired your keyboard
39 * COLS: AVR pins used for columns, left to right
40 * ROWS: AVR pins used for rows, top to bottom
41 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
45 #define MATRIX_ROW_PINS { }
46 #define MATRIX_COL_PINS { F4, F1, F0, B3, D0, D1, D4, D5, D6, D7, F7, F6, D2, D3, B6 }
50 #define DIODE_DIRECTION COL2ROW
53 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
55 //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
57 #define BACKLIGHT_PIN B7
58 // #define BACKLIGHT_BREATHING
59 #define BACKLIGHT_LEVELS 3
61 // #define RGB_DI_PIN E2
63 // #define RGBLED_NUM 16
64 // #define RGBLIGHT_HUE_STEP 8
65 // #define RGBLIGHT_SAT_STEP 8
66 // #define RGBLIGHT_VAL_STEP 8
67 // #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
68 // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
69 // /*== all animations enable ==*/
70 // #define RGBLIGHT_ANIMATIONS
71 // /*== or choose animations ==*/
72 // #define RGBLIGHT_EFFECT_BREATHING
73 // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
74 // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
75 // #define RGBLIGHT_EFFECT_SNAKE
76 // #define RGBLIGHT_EFFECT_KNIGHT
77 // #define RGBLIGHT_EFFECT_CHRISTMAS
78 // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
79 // #define RGBLIGHT_EFFECT_RGB_TEST
80 // #define RGBLIGHT_EFFECT_ALTERNATING
81 // /*== customize breathing effect ==*/
82 // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
83 // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
84 // /*==== use exp() and sin() ====*/
85 // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
86 // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
89 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
92 /* define if matrix has ghost (lacks anti-ghosting diodes) */
93 //#define MATRIX_HAS_GHOST
95 /* number of backlight levels */
97 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
98 #define LOCKING_SUPPORT_ENABLE
99 /* Locking resynchronize hack */
100 #define LOCKING_RESYNC_ENABLE
102 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
103 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
105 // #define GRAVE_ESC_CTRL_OVERRIDE
110 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
111 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
112 * makefile for this to work.)
114 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
115 * until the next keyboard reset.
117 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
118 * fully operational during normal computer usage.
120 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
121 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
122 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
131 * Magic keys are hotkey commands that allow control over firmware functions of
132 * the keyboard. They are best used in combination with the HID Listen program,
133 * found here: https://www.pjrc.com/teensy/hid_listen.html
135 * The options below allow the magic key functionality to be changed. This is
136 * useful if your keyboard/keypad is missing keys and you want magic key support.
140 /* key combination for magic key command */
141 /* defined by default; to change, uncomment and set to the combination you want */
142 // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
144 /* control how magic key switches layers */
145 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
146 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
147 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
149 /* override magic key keymap */
150 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
151 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
152 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
153 //#define MAGIC_KEY_HELP H
154 //#define MAGIC_KEY_HELP_ALT SLASH
155 //#define MAGIC_KEY_DEBUG D
156 //#define MAGIC_KEY_DEBUG_MATRIX X
157 //#define MAGIC_KEY_DEBUG_KBD K
158 //#define MAGIC_KEY_DEBUG_MOUSE M
159 //#define MAGIC_KEY_VERSION V
160 //#define MAGIC_KEY_STATUS S
161 //#define MAGIC_KEY_CONSOLE C
162 //#define MAGIC_KEY_LAYER0 0
163 //#define MAGIC_KEY_LAYER0_ALT GRAVE
164 //#define MAGIC_KEY_LAYER1 1
165 //#define MAGIC_KEY_LAYER2 2
166 //#define MAGIC_KEY_LAYER3 3
167 //#define MAGIC_KEY_LAYER4 4
168 //#define MAGIC_KEY_LAYER5 5
169 //#define MAGIC_KEY_LAYER6 6
170 //#define MAGIC_KEY_LAYER7 7
171 //#define MAGIC_KEY_LAYER8 8
172 //#define MAGIC_KEY_LAYER9 9
173 //#define MAGIC_KEY_BOOTLOADER B
174 //#define MAGIC_KEY_BOOTLOADER_ALT ESC
175 //#define MAGIC_KEY_LOCK CAPS
176 //#define MAGIC_KEY_EEPROM E
177 //#define MAGIC_KEY_EEPROM_CLEAR BSPACE
178 //#define MAGIC_KEY_NKRO N
179 //#define MAGIC_KEY_SLEEP_LED Z
182 * Feature disable options
183 * These options are also useful to firmware size reduction.
186 /* disable debug print */
192 /* disable action features */
193 //#define NO_ACTION_LAYER
194 //#define NO_ACTION_TAPPING
195 //#define NO_ACTION_ONESHOT
196 //#define NO_ACTION_MACRO
197 //#define NO_ACTION_FUNCTION
203 /* Prevent use of disabled MIDI features in the keymap */
204 //#define MIDI_ENABLE_STRICT 1
206 /* enable basic MIDI features:
207 - MIDI notes can be sent when in Music mode is on
211 /* enable advanced MIDI features:
212 - MIDI notes can be added to the keymap
213 - Octave shift and transpose
214 - Virtual sustain, portamento, and modulation wheel
217 //#define MIDI_ADVANCED
219 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
220 //#define MIDI_TONE_KEYCODE_OCTAVES 1
223 * HD44780 LCD Display Configuration
226 #define LCD_LINES 2 //< number of visible lines of the display
227 #define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
229 #define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
232 #define LCD_PORT PORTB //< port for the LCD lines
233 #define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
234 #define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
235 #define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
236 #define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
237 #define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
238 #define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
239 #define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
240 #define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
241 #define LCD_RS_PORT LCD_PORT //< port for RS line
242 #define LCD_RS_PIN 3 //< pin for RS line
243 #define LCD_RW_PORT LCD_PORT //< port for RW line
244 #define LCD_RW_PIN 2 //< pin for RW line
245 #define LCD_E_PORT LCD_PORT //< port for Enable line
246 #define LCD_E_PIN 1 //< pin for Enable line
250 /* Bootmagic Lite key configuration */
251 // #define BOOTMAGIC_LITE_ROW 0
252 // #define BOOTMAGIC_LITE_COLUMN 0