1 /* Copyright 2018 Jack Humbert
3 * This program is free software: you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License as published by
5 * the Free Software Foundation, either version 2 of the License, or
6 * (at your option) any later version.
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
13 * You should have received a copy of the GNU General Public License
14 * along with this program. If not, see <http://www.gnu.org/licenses/>.
19 #include "config_common.h"
21 /* USB Device descriptor parameter */
22 #define VENDOR_ID 0xFEED
23 #define PRODUCT_ID 0x6060
24 #define DEVICE_VER 0x0006
25 #define MANUFACTURER QMK
26 #define PRODUCT Proton C
27 #define DESCRIPTION A compact ortholinear keyboard
33 #define MATRIX_ROW_PINS { B9 }
34 #define MATRIX_COL_PINS { B0 }
37 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
40 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
41 //#define LOCKING_SUPPORT_ENABLE
42 /* Locking resynchronize hack */
43 //#define LOCKING_RESYNC_ENABLE
48 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
49 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
50 * makefile for this to work.)
52 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
53 * until the next keyboard reset.
55 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
56 * fully operational during normal computer usage.
58 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
59 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
60 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
66 /* key combination for magic key command */
67 #define IS_COMMAND() ( \
68 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
72 * Feature disable options
73 * These options are also useful to firmware size reduction.
76 /* disable debug print */
82 /* disable action features */
83 //#define NO_ACTION_LAYER
84 //#define NO_ACTION_TAPPING
85 //#define NO_ACTION_ONESHOT
86 //#define NO_ACTION_MACRO
87 //#define NO_ACTION_FUNCTION
93 /* Prevent use of disabled MIDI features in the keymap */
94 //#define MIDI_ENABLE_STRICT 1
96 /* enable basic MIDI features:
97 - MIDI notes can be sent when in Music mode is on
101 /* enable advanced MIDI features:
102 - MIDI notes can be added to the keymap
103 - Octave shift and transpose
104 - Virtual sustain, portamento, and modulation wheel
107 //#define MIDI_ADVANCED
109 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
110 //#define MIDI_TONE_KEYCODE_OCTAVES 1
112 // #define WS2812_LED_N 2
113 // #define RGBLED_NUM WS2812_LED_N
114 // #define WS2812_TIM_N 2
115 // #define WS2812_TIM_CH 2
116 // #define PORT_WS2812 GPIOA
117 // #define PIN_WS2812 1
118 // #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
119 //#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
120 //#define WS2812_EXTERNAL_PULLUP