2 #ifdef BACKLIGHT_ENABLE
9 /* Each layer is given a name to aid in readability, which is then
10 used in the keymap matrix below. The underscores do not denote
11 anything - you can have a layer called STUFF or any other name.
13 Layer names don't all need to be of the same length, obviously, and
14 you could also skip them entirely and just use numbers, though that
15 means needing to manage the numbers.
17 It is preferable to keep the symbols short so that a line worth of
18 key mappings fits compactly onto a line of code. */
20 /* This was originally based on planck/keymaps/default/default.c, and
21 then cbbrowne has revised things */
23 /* Things I did not like about the default mapping
25 - I found control too hard to get to. I use it more than Tab, so
27 - Having dash on [lower-j] is a bit nonintuitive, but may be OK
28 - I'll bet I should switch ESC/TAB
29 - I'm suspicious that I want to shift M(0) from [4][1] to [4][2],
30 and shift ESC off the first column so KC_LCTL and KC_LALT can
31 be on the first column.
32 - I needed to swap ' and ENTER
34 - All of the above are done :-)
36 - Dropped out support for Dvorak and friends. They aren't
41 /* Some interesting things implemented
43 - There is a macro that writes out "cbbrowne" to show that I could
44 - There is a (somewhat cruddy) linear congruential random number
46 - I would like to be seeding it with clock info to make it look
48 - There are two macros that use the random number generators
49 - one, M_RANDDIGIT, generates a random digit based on state
50 of the random number generator
51 - the other, M_RANDLETTER, generates a random letter based on state
52 of the random number generator
53 - in both, note the use of register_code()/unregister_code()
54 to indicate the desired key
55 - I do indeed want a sweet number pad!
58 /* Other things to do...
60 - Need to think about what zsh and readline actions I use lots
61 - Ought to ensure that Control-Alt-Delete is convenient enough
62 - How about Alt-F1 thru Alt-F8?
63 - What's the keystroke to get from X to console these days?
64 - A layer for doing console switching would not be a bad idea
65 - I haven't got page-up/page-down, let's have that...
69 _QWERTY = 0, /* Qwerty mapping */
70 _LOWER, /* Lower layer, where top line has symbols !@#$%^&*() */
71 _RAISE, /* Raised layer, where top line has digits 1234567890 */
72 _KEYPAD, /* Key pad */
73 _ADJUST, /* Special Adjust layer coming via tri-placement */
86 #define M_LOWER M(MACRO_LOWER)
87 #define M_UPPER M(MACRO_UPPER)
88 #define ROT_LED M(M_LED) /* Rotate LED */
89 #define QWERTY DF(_QWERTY) /* Switch to QWERTY layout */
90 #define KEYPAD DF(_KEYPAD) /* Switch to keypad */
91 #define USERNAME M(M_USERNAME) /* shortcut for username */
92 #define RANDDIG M(M_RANDDIGIT)
93 #define RANDALP M(M_RANDLETTER)
94 #define CTLENTER MT(MOD_RCTL, KC_ENT)
95 #define SHIFTQUOTE MT(MOD_RSFT, KC_QUOT)
96 #define ALTRIGHT MT(MOD_LALT, KC_RGHT)
97 #define MVERSION M(M_VERSION)
98 #define ALTSLASH LALT(KC_SLSH)
101 /* Note that Planck has dimensions 4 rows x 12 columns */
103 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
104 [_QWERTY] = { /* Qwerty */
105 {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
106 {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, CTLENTER},
107 {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SHIFTQUOTE },
108 {KC_TAB, KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC, KC_SPC, M_UPPER, KC_LEFT, KC_DOWN, KC_UP, ALTRIGHT}
109 /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */
111 [_RAISE] = { /* RAISE */
112 {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
113 {_______, KC_4, KC_5, KC_6, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
114 {_______, KC_7, KC_8, KC_9, _______, _______, _______, QWERTY, KEYPAD, KEYPAD, ALTSLASH,_______},
115 {_______, KC_0, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_HOME, KC_END, KC_PGUP}
117 [_LOWER] = { /* LOWER */
118 {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
119 {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
120 {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH, _______},
121 {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_HOME, KC_END, KC_PGUP}
123 [_KEYPAD] = { /* Key Pad */
124 {KC_ESC, USERNAME, MVERSION, KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
125 {KC_LCTL, RANDDIG, KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
126 {KC_LSFT, RANDALP, KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_KP_PLUS, KC_1, KC_2, KC_3, KC_ENTER},
127 {KC_TAB, KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC, KC_SPC, QWERTY, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT}
130 [_ADJUST] = { /* Adjustments - gonna shift the wild tools in here */
131 {ROT_LED,USERNAME,MVERSION, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
132 {_______, RANDDIG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
133 {_______, RANDALP, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______ },
134 {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
138 /* What is fn_actions actually used for??? */
139 const uint16_t PROGMEM fn_actions[] = {
142 /* This bit of logic seeds a wee linear congruential random number generator */
143 /* lots of prime numbers everywhere... */
144 static uint16_t random_value = 157;
146 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
149 clockbyte = TCNT1 % 256;
151 // MACRODOWN only works in this function
154 if (record->event.pressed) {
155 register_code(KC_RSFT);
156 #ifdef BACKLIGHT_ENABLE
160 unregister_code(KC_RSFT);
164 if (record->event.pressed) {
165 SEND_STRING("cbbrowne");
169 if (record->event.pressed) {
170 SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP "@" QMK_VERSION "@" QMK_BUILDDATE);
174 /* Generate, based on random number generator, a keystroke for
175 a numeric digit chosen at random */
176 random_value = ((random_value + randadd) * randmul) % randmod;
177 if (record->event.pressed) {
178 /* Here, we mix the LCRNG with low bits from one of the system
179 clocks via XOR in the theory that this may be more random
180 than either separately */
181 rval = (random_value ^ clockbyte) % 10;
182 /* Note that KC_1 thru KC_0 are a contiguous range */
183 register_code (KC_1 + rval);
184 unregister_code (KC_1 + rval);
188 /* Generate, based on random number generator, a keystroke for
189 a letter chosen at random */
190 /* Here, we mix the LCRNG with low bits from one of the system
191 clocks via XOR in the theory that this may be more random
192 than either separately */
193 random_value = ((random_value + randadd) * randmul) % randmod;
194 if (record->event.pressed) {
195 rval = (random_value ^ clockbyte) % 26;
196 register_code (KC_A + rval);
197 unregister_code (KC_A + rval);
201 if (record->event.pressed)
204 #ifdef BACKLIGHT_ENABLE
205 breathing_speed_set(2);
208 update_tri_layer(_LOWER, _RAISE, _ADJUST);
213 update_tri_layer(_LOWER, _RAISE, _ADJUST);
217 if (record->event.pressed)
220 #ifdef BACKLIGHT_ENABLE
221 breathing_speed_set(2);
224 update_tri_layer(_LOWER, _RAISE, _ADJUST);
229 update_tri_layer(_LOWER, _RAISE, _ADJUST);