1 # MxSS - Polycarb 65% Kit for MX/SMK
3 ![MxSS - Polycarb 65% Kit for MX/SMK](https://i.imgur.com/WDTWcmU.jpg)
7 - Case: Frosted Polycarbonate, CNC milled
8 - Plate: Brass, mirror-finished and electroplated
9 - Weight: Same as plate
10 - PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish
14 - 2.9 degrees angle on the case
16 - Center USB, Type-B Mini
17 - MX and SMK (White and Orange) switch support
20 - 1.5kg with plate and weight
22 Keyboard Maintainer: [MxBlue](https://github.com/mxblu)
24 Hardware Supported: Custom PCB, ATMega32u4
26 Hardware Availability: https://geekhack.org/index.php?topic=94986.0
28 Make example for this keyboard (after setting up your build environment):
32 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
36 The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.
38 There are 3 modes of operation:
40 - FLED_OFF - Front LEDs stay off
41 - FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
42 - FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer
44 Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).
48 - FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
49 - FLED_VAI - Increase front LED brightness
50 - FLED_VAD - Decrease front LED brightness
54 As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.