2 Copyright 2018 ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
20 #include "config_common.h"
22 /* USB Device descriptor parameter */
23 #define VENDOR_ID 0xFEED
24 #define PRODUCT_ID 0x3939
25 #define DEVICE_VER 0x0001
26 #define MANUFACTURER ENDO Katsuhiro
27 #define PRODUCT MiniAxe
28 #define DESCRIPTION Yet another split keyboard
35 * Keyboard Matrix Assignments
37 * Change this to how you wired your keyboard
38 * COLS: AVR pins used for columns, left to right
39 * ROWS: AVR pins used for rows, top to bottom
40 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
41 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
42 * NO_DIODE = switches are directly connected to AVR pins
45 // #define MATRIX_ROW_PINS { D0, D5 }
46 // #define MATRIX_COL_PINS { F1, F0, B0 }
47 #define DIRECT_PINS { \
48 { F1, E6, B0, B2, B3 }, \
49 { F5, F0, B1, B7, D2 }, \
50 { F6, F7, C7, D5, D3 }, \
51 { B5, C6, B6, NO_PIN, NO_PIN } \
55 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
56 //#define DIODE_DIRECTION CUSTOM_MATRIX
58 // #define BACKLIGHT_PIN B7
59 // #define BACKLIGHT_BREATHING
60 // #define BACKLIGHT_LEVELS 3
62 /* Uncomment below if use underglow */
65 #define RGBLIGHT_ANIMATIONS
67 #define RGBLIGHT_HUE_STEP 8
68 #define RGBLIGHT_SAT_STEP 8
69 #define RGBLIGHT_VAL_STEP 8
72 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
73 #define DEBOUNCING_DELAY 5
75 /* define if matrix has ghost (lacks anti-ghosting diodes) */
76 //#define MATRIX_HAS_GHOST
78 /* number of backlight levels */
80 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
81 #define LOCKING_SUPPORT_ENABLE
82 /* Locking resynchronize hack */
83 #define LOCKING_RESYNC_ENABLE
85 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
86 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
88 // #define GRAVE_ESC_CTRL_OVERRIDE
93 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
94 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
95 * makefile for this to work.)
97 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
98 * until the next keyboard reset.
100 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
101 * fully operational during normal computer usage.
103 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
104 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
105 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
114 * Magic keys are hotkey commands that allow control over firmware functions of
115 * the keyboard. They are best used in combination with the HID Listen program,
116 * found here: https://www.pjrc.com/teensy/hid_listen.html
118 * The options below allow the magic key functionality to be changed. This is
119 * useful if your keyboard/keypad is missing keys and you want magic key support.
123 /* key combination for magic key command */
124 #define IS_COMMAND() ( \
125 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
128 /* control how magic key switches layers */
129 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
130 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
131 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
133 /* override magic key keymap */
134 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
135 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
136 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
137 //#define MAGIC_KEY_HELP1 H
138 //#define MAGIC_KEY_HELP2 SLASH
139 //#define MAGIC_KEY_DEBUG D
140 //#define MAGIC_KEY_DEBUG_MATRIX X
141 //#define MAGIC_KEY_DEBUG_KBD K
142 //#define MAGIC_KEY_DEBUG_MOUSE M
143 //#define MAGIC_KEY_VERSION V
144 //#define MAGIC_KEY_STATUS S
145 //#define MAGIC_KEY_CONSOLE C
146 //#define MAGIC_KEY_LAYER0_ALT1 ESC
147 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
148 //#define MAGIC_KEY_LAYER0 0
149 //#define MAGIC_KEY_LAYER1 1
150 //#define MAGIC_KEY_LAYER2 2
151 //#define MAGIC_KEY_LAYER3 3
152 //#define MAGIC_KEY_LAYER4 4
153 //#define MAGIC_KEY_LAYER5 5
154 //#define MAGIC_KEY_LAYER6 6
155 //#define MAGIC_KEY_LAYER7 7
156 //#define MAGIC_KEY_LAYER8 8
157 //#define MAGIC_KEY_LAYER9 9
158 //#define MAGIC_KEY_BOOTLOADER PAUSE
159 //#define MAGIC_KEY_LOCK CAPS
160 //#define MAGIC_KEY_EEPROM E
161 //#define MAGIC_KEY_NKRO N
162 //#define MAGIC_KEY_SLEEP_LED Z
165 * Feature disable options
166 * These options are also useful to firmware size reduction.
169 /* disable debug print */
175 /* disable action features */
176 //#define NO_ACTION_LAYER
177 //#define NO_ACTION_TAPPING
178 //#define NO_ACTION_ONESHOT
179 //#define NO_ACTION_MACRO
180 //#define NO_ACTION_FUNCTION
186 /* Prevent use of disabled MIDI features in the keymap */
187 //#define MIDI_ENABLE_STRICT 1
189 /* enable basic MIDI features:
190 - MIDI notes can be sent when in Music mode is on
194 /* enable advanced MIDI features:
195 - MIDI notes can be added to the keymap
196 - Octave shift and transpose
197 - Virtual sustain, portamento, and modulation wheel
200 //#define MIDI_ADVANCED
202 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
203 //#define MIDI_TONE_KEYCODE_OCTAVES 1
206 * HD44780 LCD Display Configuration
209 #define LCD_LINES 2 //< number of visible lines of the display
210 #define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
212 #define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
215 #define LCD_PORT PORTB //< port for the LCD lines
216 #define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
217 #define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
218 #define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
219 #define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
220 #define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
221 #define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
222 #define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
223 #define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
224 #define LCD_RS_PORT LCD_PORT //< port for RS line
225 #define LCD_RS_PIN 3 //< pin for RS line
226 #define LCD_RW_PORT LCD_PORT //< port for RW line
227 #define LCD_RW_PIN 2 //< pin for RW line
228 #define LCD_E_PORT LCD_PORT //< port for Enable line
229 #define LCD_E_PIN 1 //< pin for Enable line
233 /* Bootmagic Lite key configuration */
234 // #define BOOTMAGIC_LITE_ROW 0
235 // #define BOOTMAGIC_LITE_COLUMN 0
237 /* Serial settings */
239 /* serial.c configuration for split keyboard */
240 #define SOFT_SERIAL_PIN D0
243 #define I2C_MASTER_LEFT
244 //#define I2C_MASTER_RIGHT