2 Copyright 2019 Luciano M
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
20 #include "config_common.h"
22 /* USB Device descriptor parameter */
23 #define VENDOR_ID 0xFEED
24 #define PRODUCT_ID 0x0000
25 #define DEVICE_VER 0x0001
26 #define MANUFACTURER Luciano M
28 #define DESCRIPTION 3x14 split keyboard with two thumb keys per side
31 #define MATRIX_ROWS 8 // 4 rows each half
34 #define MATRIX_ROW_PINS { F7, C6, F6, F5 }
35 #define MATRIX_COL_PINS { D4, D7, E6, B3, B2, B6, F4 }
36 // #define UNUSED_PINS
39 #define DIODE_DIRECTION COL2ROW
42 #define SOFT_SERIAL_PIN D0
47 #define RGBLIGHT_SPLIT
48 #define RGBLED_SPLIT { 5, 5 }
49 #define RGBLIGHT_HUE_STEP 8
50 #define RGBLIGHT_SAT_STEP 8
51 #define RGBLIGHT_VAL_STEP 8
52 #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
53 #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
54 /*== all animations enable ==*/
55 #define RGBLIGHT_ANIMATIONS
56 /*== customize breathing effect ==*/
57 /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
58 #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
59 /*==== use exp() and sin() ====*/
60 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
61 #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
64 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
67 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
68 #define LOCKING_SUPPORT_ENABLE
69 /* Locking resynchronize hack */
70 #define LOCKING_RESYNC_ENABLE
72 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
73 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
75 // #define GRAVE_ESC_CTRL_OVERRIDE
80 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
81 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
82 * makefile for this to work.)
84 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
85 * until the next keyboard reset.
87 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
88 * fully operational during normal computer usage.
90 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
91 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
92 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
101 * Magic keys are hotkey commands that allow control over firmware functions of
102 * the keyboard. They are best used in combination with the HID Listen program,
103 * found here: https://www.pjrc.com/teensy/hid_listen.html
105 * The options below allow the magic key functionality to be changed. This is
106 * useful if your keyboard/keypad is missing keys and you want magic key support.
110 /* key combination for magic key command */
111 /* defined by default; to change, uncomment and set to the combination you want */
112 // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
114 /* control how magic key switches layers */
115 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
116 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
117 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
119 /* override magic key keymap */
120 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
121 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
122 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
123 //#define MAGIC_KEY_HELP H
124 //#define MAGIC_KEY_HELP_ALT SLASH
125 //#define MAGIC_KEY_DEBUG D
126 //#define MAGIC_KEY_DEBUG_MATRIX X
127 //#define MAGIC_KEY_DEBUG_KBD K
128 //#define MAGIC_KEY_DEBUG_MOUSE M
129 //#define MAGIC_KEY_VERSION V
130 //#define MAGIC_KEY_STATUS S
131 //#define MAGIC_KEY_CONSOLE C
132 //#define MAGIC_KEY_LAYER0 0
133 //#define MAGIC_KEY_LAYER0_ALT GRAVE
134 //#define MAGIC_KEY_LAYER1 1
135 //#define MAGIC_KEY_LAYER2 2
136 //#define MAGIC_KEY_LAYER3 3
137 //#define MAGIC_KEY_LAYER4 4
138 //#define MAGIC_KEY_LAYER5 5
139 //#define MAGIC_KEY_LAYER6 6
140 //#define MAGIC_KEY_LAYER7 7
141 //#define MAGIC_KEY_LAYER8 8
142 //#define MAGIC_KEY_LAYER9 9
143 //#define MAGIC_KEY_BOOTLOADER B
144 //#define MAGIC_KEY_BOOTLOADER_ALT ESC
145 //#define MAGIC_KEY_LOCK CAPS
146 //#define MAGIC_KEY_EEPROM E
147 //#define MAGIC_KEY_EEPROM_CLEAR BSPACE
148 //#define MAGIC_KEY_NKRO N
149 //#define MAGIC_KEY_SLEEP_LED Z
152 * Feature disable options
153 * These options are also useful to firmware size reduction.
156 /* disable debug print */
162 /* disable action features */
163 //#define NO_ACTION_LAYER
164 //#define NO_ACTION_TAPPING
165 //#define NO_ACTION_ONESHOT
166 //#define NO_ACTION_MACRO
167 //#define NO_ACTION_FUNCTION
170 /* Bootmagic Lite key configuration */
171 // #define BOOTMAGIC_LITE_ROW 0
172 // #define BOOTMAGIC_LITE_COLUMN 0