1 #include <avr/sfr_defs.h>
2 #include <avr/timer_avr.h>
11 uint16_t click_hz = CLICK_HZ;
12 uint16_t click_time = CLICK_MS;
13 uint8_t click_toggle = CLICK_ENABLED;
16 void matrix_init_kb(void)
21 // audio_init() sets PB5 to output and drives it low, which breaks our matrix
22 // so reset PB5 to input
26 // If we're not using the audio pin, drive it low
36 void matrix_scan_kb(void)
38 #ifdef WATCHDOG_ENABLE
44 void click(uint16_t freq, uint16_t duration){
46 if(freq >= 100 && freq <= 20000 && duration < 100){
48 for (uint16_t i = 0; i < duration; i++){
56 bool process_record_kb(uint16_t keycode, keyrecord_t* record)
58 // Test code that turns on the switch led for the key that is pressed
59 // set_backlight_by_keymap(record->event.key.col, record->event.key.row);
60 if (click_toggle && record->event.pressed){
61 click(click_hz, click_time);
63 if (keycode == RESET) {
67 return process_record_user(keycode, record);
70 void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
75 if(id == LFK_ESC_TILDE){
76 // Send ~ on shift-esc
77 void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
78 uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
79 method(shifted ? KC_GRAVE : KC_ESCAPE);
80 send_keyboard_report();
81 }else if(event->event.pressed){
83 case LFK_SET_DEFAULT_LAYER:
84 // set/save the current base layer to eeprom, falls through to LFK_CLEAR
85 eeconfig_update_default_layer(1UL << opt);
86 default_layer_set(1UL << opt);
88 // Go back to default layer
92 case LFK_CLICK_FREQ_LOWER:
93 sign = -1; // continue to next statement
94 case LFK_CLICK_FREQ_HIGHER:
95 click_hz += sign * 100;
96 click(click_hz, click_time);
98 case LFK_CLICK_TOGGLE:
109 case LFK_CLICK_TIME_SHORTER:
110 sign = -1; // continue to next statement
111 case LFK_CLICK_TIME_LONGER:
113 click(click_hz, click_time);
116 case LFK_DEBUG_SETTINGS:
118 dprintf(" toggle: %d\n", click_toggle);
119 dprintf(" freq(hz): %d\n", click_hz);
120 dprintf(" duration(ms): %d\n", click_time);
126 void reset_keyboard_kb(){
127 #ifdef WATCHDOG_ENABLE
135 void led_set_kb(uint8_t usb_led)
137 // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
139 led_set_user(usb_led);
143 const uint8_t switch_matrices[] = {0, 1};
144 const uint8_t rgb_matrices[] = {6, 7};
145 // const uint8_t rgb_sequence[] = {
146 // 14, 24, 23, 22, 21, 20, 19, 18, 26, 25, 28, 29,
147 // 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
149 const uint8_t rgb_sequence[] = {
151 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
153 // Maps switch LEDs from Row/Col to ISSI matrix.
155 // Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
156 // / \ ISSI Col | ISSI Row |
158 // const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
160 // 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91,
161 // 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1,
162 // 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3,
163 // 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2,
164 // 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1);