2 Copyright 2012 Jun Wako <wakojun@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 #define VENDOR_ID 0xFEED
24 #define PRODUCT_ID 0x6060
25 #define DEVICE_VER 0x0001
26 #define MANUFACTURER LFKeyboards
28 #define DESCRIPTION QMK keyboard firmware for LFK87
30 #define DIODE_DIRECTION COL2ROW
34 /* RevB Matrix config */
36 #define MATRIX_COLS 17
37 #define MATRIX_ROW_PINS {D2, D3, D4, D5, D6, D7 }
38 #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\
39 F0, F1, F2, F3, C0, C1, C2 }
40 #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\
41 D0, D1, E0, E1, E2, E3, E4, F4, F5, F6, F7}
42 #define RGBLED_NUM 25 // Number of LEDs
44 /* RevC/D Matrix config */
46 #define MATRIX_COLS 16
47 #define MATRIX_ROW_PINS {F2, D7, D6, D5, D4, D3, F3}
48 #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, C7, C1, C0, E1, E0, C2, C3, C4}
49 #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C5, C6, D2, E3, E4, E5, E6, E7, \
50 F0, F1, F4, F5, F6, F7}
51 #define RGBLED_NUM 24 // Number of LEDs
57 #define BACKLIGHT_LEVELS 10
58 #define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255}
60 #define RGB_DI_PIN F4 // Have to set it to something to get the ws2812 code to compile
61 #define RGBLIGHT_ANIMATIONS
62 #define RGBLIGHT_HUE_STEP 10
63 #define RGBLIGHT_SAT_STEP 17
64 #define RGBLIGHT_VAL_STEP 17
66 #define TAPPING_TERM 200
68 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
69 #define DEBOUNCING_DELAY 5
71 /* define if matrix has ghost (lacks anti-ghosting diodes) */
72 //#define MATRIX_HAS_GHOST
74 /* number of backlight levels */
76 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
77 #define LOCKING_SUPPORT_ENABLE
78 /* Locking resynchronize hack */
79 #define LOCKING_RESYNC_ENABLE
84 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
85 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
86 * makefile for this to work.)
88 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
89 * until the next keyboard reset.
91 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
92 * fully operational during normal computer usage.
94 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
95 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
96 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
105 * Magic keys are hotkey commands that allow control over firmware functions of
106 * the keyboard. They are best used in combination with the HID Listen program,
107 * found here: https://www.pjrc.com/teensy/hid_listen.html
109 * The options below allow the magic key functionality to be changed. This is
110 * useful if your keyboard/keypad is missing keys and you want magic key support.
114 /* key combination for magic key command */
115 #define IS_COMMAND() ( \
116 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
119 /* control how magic key switches layers */
120 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
121 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
122 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
124 /* override magic key keymap */
125 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
126 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
127 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
128 //#define MAGIC_KEY_HELP1 H
129 //#define MAGIC_KEY_HELP2 SLASH
130 //#define MAGIC_KEY_DEBUG D
131 //#define MAGIC_KEY_DEBUG_MATRIX X
132 //#define MAGIC_KEY_DEBUG_KBD K
133 //#define MAGIC_KEY_DEBUG_MOUSE M
134 //#define MAGIC_KEY_VERSION V
135 //#define MAGIC_KEY_STATUS S
136 //#define MAGIC_KEY_CONSOLE C
137 //#define MAGIC_KEY_LAYER0_ALT1 ESC
138 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
139 //#define MAGIC_KEY_LAYER0 0
140 //#define MAGIC_KEY_LAYER1 1
141 //#define MAGIC_KEY_LAYER2 2
142 //#define MAGIC_KEY_LAYER3 3
143 //#define MAGIC_KEY_LAYER4 4
144 //#define MAGIC_KEY_LAYER5 5
145 //#define MAGIC_KEY_LAYER6 6
146 //#define MAGIC_KEY_LAYER7 7
147 //#define MAGIC_KEY_LAYER8 8
148 //#define MAGIC_KEY_LAYER9 9
149 //#define MAGIC_KEY_BOOTLOADER PAUSE
150 //#define MAGIC_KEY_LOCK CAPS
151 //#define MAGIC_KEY_EEPROM E
152 //#define MAGIC_KEY_NKRO N
153 //#define MAGIC_KEY_SLEEP_LED Z
156 * Feature disable options
157 * These options are also useful to firmware size reduction.
160 /* disable debug print */
166 /* disable action features */
167 //#define NO_ACTION_LAYER
168 //#define NO_ACTION_TAPPING
169 //#define NO_ACTION_ONESHOT
170 //#define NO_ACTION_MACRO
171 //#define NO_ACTION_FUNCTION