2 Copyright 2012 Jun Wako <wakojun@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0x6060
26 #define DEVICE_VER 0x0001
27 #define MANUFACTURER You
28 #define PRODUCT kc60v2
29 #define DESCRIPTION A custom keyboard
33 #define MATRIX_COLS 14
36 * Keyboard Matrix Assignments
38 * Change this to how you wired your keyboard
39 * COLS: AVR pins used for columns, left to right
40 * ROWS: AVR pins used for rows, top to bottom
41 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
46 // Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0
47 // Pins for rows include: D0 D1 F6 F7 D5
49 #define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 }
50 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
53 #define BACKLIGHT_PIN B6
55 /* COL2ROW or ROW2COL */
56 #define DIODE_DIRECTION COL2ROW
58 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
59 #define DEBOUNCING_DELAY 5
61 /* define if matrix has ghost (lacks anti-ghosting diodes) */
62 //#define MATRIX_HAS_GHOST
64 /* number of backlight levels */
65 #define BACKLIGHT_LEVELS 5
67 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
68 #define LOCKING_SUPPORT_ENABLE
69 /* Locking resynchronize hack */
70 #define LOCKING_RESYNC_ENABLE
75 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
76 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
77 * makefile for this to work.)
79 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
80 * until the next keyboard reset.
82 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
83 * fully operational during normal computer usage.
85 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
86 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
87 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
96 * Magic keys are hotkey commands that allow control over firmware functions of
97 * the keyboard. They are best used in combination with the HID Listen program,
98 * found here: https://www.pjrc.com/teensy/hid_listen.html
100 * The options below allow the magic key functionality to be changed. This is
101 * useful if your keyboard/keypad is missing keys and you want magic key support.
105 /* key combination for magic key command */
106 #define IS_COMMAND() ( \
107 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
110 /* control how magic key switches layers */
111 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
112 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
113 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
115 /* override magic key keymap */
116 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
117 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
118 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
119 //#define MAGIC_KEY_HELP1 H
120 //#define MAGIC_KEY_HELP2 SLASH
121 //#define MAGIC_KEY_DEBUG D
122 //#define MAGIC_KEY_DEBUG_MATRIX X
123 //#define MAGIC_KEY_DEBUG_KBD K
124 //#define MAGIC_KEY_DEBUG_MOUSE M
125 //#define MAGIC_KEY_VERSION V
126 //#define MAGIC_KEY_STATUS S
127 //#define MAGIC_KEY_CONSOLE C
128 //#define MAGIC_KEY_LAYER0_ALT1 ESC
129 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
130 //#define MAGIC_KEY_LAYER0 0
131 //#define MAGIC_KEY_LAYER1 1
132 //#define MAGIC_KEY_LAYER2 2
133 //#define MAGIC_KEY_LAYER3 3
134 //#define MAGIC_KEY_LAYER4 4
135 //#define MAGIC_KEY_LAYER5 5
136 //#define MAGIC_KEY_LAYER6 6
137 //#define MAGIC_KEY_LAYER7 7
138 //#define MAGIC_KEY_LAYER8 8
139 //#define MAGIC_KEY_LAYER9 9
140 //#define MAGIC_KEY_BOOTLOADER PAUSE
141 //#define MAGIC_KEY_LOCK CAPS
142 //#define MAGIC_KEY_EEPROM E
143 //#define MAGIC_KEY_NKRO N
144 //#define MAGIC_KEY_SLEEP_LED Z
147 * Feature disable options
148 * These options are also useful to firmware size reduction.
151 /* disable debug print */
157 /* disable action features */
158 //#define NO_ACTION_LAYER
159 //#define NO_ACTION_TAPPING
160 //#define NO_ACTION_ONESHOT
161 //#define NO_ACTION_MACRO
162 //#define NO_ACTION_FUNCTION