4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0x0257
26 #define DEVICE_VER 0x0001
27 #define MANUFACTURER Yiancar-Designs
29 #define DESCRIPTION GH60 compatible, tool free RGB keyboard
33 #define MATRIX_COLS 14
36 * Keyboard Matrix Assignments
38 * Change this to how you wired your keyboard
39 * COLS: AVR pins used for columns, left to right
40 * ROWS: AVR pins used for rows, top to bottom
41 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
45 #define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 }
46 #define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 }
47 #define UNUSED_PINS { B6, C6, C7, F6 }
49 /* bootloader configuration */
51 #define QMK_ESC_OUTPUT B5 // usually COL
52 #define QMK_ESC_INPUT B2 // usually ROW
54 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
55 #define DIODE_DIRECTION COL2ROW
57 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
58 #define DEBOUNCING_DELAY 5
60 /* define if matrix has ghost (lacks anti-ghosting diodes) */
61 //#define MATRIX_HAS_GHOST
63 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
64 #define LOCKING_SUPPORT_ENABLE
65 /* Locking resynchronize hack */
66 #define LOCKING_RESYNC_ENABLE
68 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
69 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
71 // #define GRAVE_ESC_CTRL_OVERRIDE
76 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
77 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
78 * makefile for this to work.)
80 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
81 * until the next keyboard reset.
83 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
84 * fully operational during normal computer usage.
86 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
87 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
88 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
97 * Magic keys are hotkey commands that allow control over firmware functions of
98 * the keyboard. They are best used in combination with the HID Listen program,
99 * found here: https://www.pjrc.com/teensy/hid_listen.html
101 * The options below allow the magic key functionality to be changed. This is
102 * useful if your keyboard/keypad is missing keys and you want magic key support.
106 /* key combination for magic key command */
107 #define IS_COMMAND() ( \
108 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
112 * Feature disable options
113 * These options are also useful to firmware size reduction.
116 /* disable debug print */
122 /* Backlight options */
124 //This is experimental do not enable yet
125 //#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
127 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
128 #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
129 #define RGB_MATRIX_SKIP_FRAMES 0
130 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215
132 #define DRIVER_ADDR_1 0b1110100
133 #define DRIVER_ADDR_2 0b1110101
135 #define DRIVER_COUNT 2
136 #define DRIVER_1_LED_TOTAL 30
139 #define DRIVER_2_LED_TOTAL 31
141 #define DRIVER_2_LED_TOTAL 32
144 #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL