keyboards/georgi/georgi.h

   1 #pragma once
   2 #include <util/delay.h>
   3 #include <stdint.h>
   4 #include <stdbool.h>
   5 #include "quantum.h"
   6 #include "i2c_master.h"
   7 #include "matrix.h"
   8
   9
  10 extern i2c_status_t mcp23018_status;
  11 #define ERGODOX_EZ_I2C_TIMEOUT 1000
  12 #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
  13 #define CPU_16MHz       0x00
  14
  15 // I2C aliases and register addresses (see "mcp23018.md")
  16 //#define I2C_ADDR        0b0100000
  17 #define I2C_ADDR        0x20
  18 #define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
  19 #define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
  20 #define IODIRA          0x00            // i/o direction register
  21 #define IODIRB          0x01
  22 #define GPPUA           0x0C            // GPIO pull-up resistor register
  23 #define GPPUB           0x0D
  24 #define GPIOA           0x12            // general purpose i/o port register (write modifies OLAT)
  25 #define GPIOB           0x13
  26 #define OLATA           0x14            // output latch register
  27 #define OLATB           0x15
  28
  29 void init_ergodox(void);
  30 uint8_t init_mcp23018(void);
  31
  32 /*  ---------- LEFT HAND -----------   ---------- RIGHT HAND ---------- */
  33 #define LAYOUT_georgi(                                            \
  34     L00,L01,L02,L03,L04,L05,            R00,R01,R02,R03,R04,R05,  \
  35     L10,L11,L12,L13,L14,L15,            R10,R11,R12,R13,R14,R15,  \
  36                 L20,L21,L22,            R20,R21,R22)              \
  37                                                                   \
  38     {                         \
  39     { KC_NO,  R00,   R10,   R21},     \
  40     { KC_NO,  R01,   R11,   R20},     \
  41     { KC_NO,  R02,   R12,   R22},     \
  42     { KC_NO,  R03,   R13,   KC_NO},   \
  43     { KC_NO,  R04,   R14,   KC_NO},   \
  44     { KC_NO,  R05,   R15,   KC_NO},   \
  45     { KC_NO,  KC_NO, KC_NO, KC_NO},     \
  46                                                           \
  47     { KC_NO,  L05,   L15,   L22},     \
  48     { KC_NO,  L04,   L14,   L21},     \
  49     { KC_NO,  L03,   L13,   L20},     \
  50     { KC_NO,  L02,   L12,   KC_NO},   \
  51     { KC_NO,  L01,   L11,   KC_NO},   \
  52     { KC_NO,  L00,   L10,   KC_NO},   \
  53     { KC_NO,  KC_NO, KC_NO, KC_NO},     \
  54                               \
  55 }
  56
  57 /*  ---------- LEFT HAND -----------   ---------- RIGHT HAND ----------
  58 #define LAYOUT_GERGO(                                                    \
  59     L00,L01,L02,L03,L04,L05,                   R00,R01,R02,R03,R04,R05,  \
  60     L10,L11,L12,L13,L14,L15,L16,           R10,R11,R12,R13,R14,R15,R16,  \
  61     L20,L21,L22,L23,L24,L25,L26,           R20,R21,R22,R23,R24,R25,R26,  \
  62                 L31,L32,                           R33,R34,              \
  63                             L30,           R30,                          \
  64                         L33,L34,           R31,R32)                      \
  65                                                                          \
  66     {                               \
  67     { KC_NO, L16,   L26,  L30},     \
  68     { L05,   L15,   L25,  L34},     \
  69     { L04,   L14,   L24,  L33},     \
  70     { L03,   L13,   L23,  L32},     \
  71     { L02,   L12,   L22,  L31},     \
  72     { L01,   L11,   L21,  KC_NO},   \
  73     { L00,   L10,   L20,  KC_NO},   \
  74                                     \
  75     { KC_NO, R10, R20, R30},      \
  76     { R00,   R11,   R21, R31},      \
  77     { R01,   R12,   R22, R32},      \
  78     { R02,   R13,   R23, R33},      \
  79     { R03,   R14,   R24, R34},      \
  80     { R04,   R15,   R25, KC_NO},    \
  81     { R05,   R16,   R26, KC_NO},    \
  82 } */