2 Copyright 2018 James Underwood
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0x6060
26 #define DEVICE_VER 0x0001
27 #define MANUFACTURER You
28 #define PRODUCT Fleuron v1
29 #define DESCRIPTION A 6x16 ortho
33 #define MATRIX_COLS 16
36 * Keyboard Matrix Assignments
38 * Change this to how you wired your keyboard
39 * COLS: AVR pins used for columns, left to right
40 * ROWS: AVR pins used for rows, top to bottom
41 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
45 #define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
46 #define MATRIX_COL_PINS { C7, B6, B3, B5, B4, D7, D4, D5, D3, D2, D1, D0, B7, B0, B1, B2 }
50 #define DIODE_DIRECTION COL2ROW
52 // #define BACKLIGHT_PIN B7
53 // #define BACKLIGHT_BREATHING
54 // #define BACKLIGHT_LEVELS 3
56 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
57 #define DEBOUNCING_DELAY 5
59 /* define if matrix has ghost (lacks anti-ghosting diodes) */
60 //#define MATRIX_HAS_GHOST
62 /* number of backlight levels */
64 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
65 #define LOCKING_SUPPORT_ENABLE
66 /* Locking resynchronize hack */
67 #define LOCKING_RESYNC_ENABLE
69 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
70 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
72 // #define GRAVE_ESC_CTRL_OVERRIDE
77 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
78 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
79 * makefile for this to work.)
81 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
82 * until the next keyboard reset.
84 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
85 * fully operational during normal computer usage.
87 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
88 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
89 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
98 * Magic keys are hotkey commands that allow control over firmware functions of
99 * the keyboard. They are best used in combination with the HID Listen program,
100 * found here: https://www.pjrc.com/teensy/hid_listen.html
102 * The options below allow the magic key functionality to be changed. This is
103 * useful if your keyboard/keypad is missing keys and you want magic key support.
107 /* control how magic key switches layers */
108 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
109 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
110 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
112 /* override magic key keymap */
113 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
114 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
115 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
116 //#define MAGIC_KEY_HELP1 H
117 //#define MAGIC_KEY_HELP2 SLASH
118 //#define MAGIC_KEY_DEBUG D
119 //#define MAGIC_KEY_DEBUG_MATRIX X
120 //#define MAGIC_KEY_DEBUG_KBD K
121 //#define MAGIC_KEY_DEBUG_MOUSE M
122 //#define MAGIC_KEY_VERSION V
123 //#define MAGIC_KEY_STATUS S
124 //#define MAGIC_KEY_CONSOLE C
125 //#define MAGIC_KEY_LAYER0_ALT1 ESC
126 //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
127 //#define MAGIC_KEY_LAYER0 0
128 //#define MAGIC_KEY_LAYER1 1
129 //#define MAGIC_KEY_LAYER2 2
130 //#define MAGIC_KEY_LAYER3 3
131 //#define MAGIC_KEY_LAYER4 4
132 //#define MAGIC_KEY_LAYER5 5
133 //#define MAGIC_KEY_LAYER6 6
134 //#define MAGIC_KEY_LAYER7 7
135 //#define MAGIC_KEY_LAYER8 8
136 //#define MAGIC_KEY_LAYER9 9
137 //#define MAGIC_KEY_BOOTLOADER PAUSE
138 //#define MAGIC_KEY_LOCK CAPS
139 //#define MAGIC_KEY_EEPROM E
140 //#define MAGIC_KEY_NKRO N
141 //#define MAGIC_KEY_SLEEP_LED Z
144 * Feature disable options
145 * These options are also useful to firmware size reduction.
148 /* disable debug print */
154 /* disable action features */
155 //#define NO_ACTION_LAYER
156 //#define NO_ACTION_TAPPING
157 //#define NO_ACTION_ONESHOT
158 //#define NO_ACTION_MACRO
159 //#define NO_ACTION_FUNCTION
165 /* Prevent use of disabled MIDI features in the keymap */
166 //#define MIDI_ENABLE_STRICT 1
168 /* enable basic MIDI features:
169 - MIDI notes can be sent when in Music mode is on
173 /* enable advanced MIDI features:
174 - MIDI notes can be added to the keymap
175 - Octave shift and transpose
176 - Virtual sustain, portamento, and modulation wheel
179 //#define MIDI_ADVANCED
181 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
182 //#define MIDI_TONE_KEYCODE_OCTAVES 1
184 #define RGB_DI_PIN E6 // The pin the LED strip is connected to
185 #define RGBLED_NUM 18 // Number of LEDs in your strip
186 #define RGBLIGHT_ANIMATIONS