2 Copyright 2017 Balz Guenat
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0x980C
26 #define DEVICE_VER 0x0100
27 #define MANUFACTURER QMK
28 #define PRODUCT Leopold FC980C with QMK
29 #define DESCRIPTION Leopold FC980C with Hasu alternative controller using QMK
33 #define MATRIX_COLS 16
35 // #define MATRIX_ROW_PINS { B0, B2, B4, B5, B6 }
36 // #define MATRIX_COL_PINS { F5, B1, F0, F1, F4, B3, D7, D6, D4, D5, D3, D2, D1, D0 }
37 // #define UNUSED_PINS
39 #define DIODE_DIRECTION CUSTOM_MATRIX
41 /* define if matrix has ghost */
42 //#define MATRIX_HAS_GHOST
44 /* number of backlight levels */
45 // #define BACKLIGHT_LEVELS 1
47 /* mapping backlight LEDs to correct Pin */
48 // #define BACKLIGHT_PIN B7
50 /* Set 0 if debouncing isn't needed */
51 #define DEBOUNCING_DELAY 0
52 #define TAPPING_TERM 175
54 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
55 // #define LOCKING_SUPPORT_ENABLE
56 /* Locking resynchronize hack */
57 // #define LOCKING_RESYNC_ENABLE
60 * Feature disable options
61 * These options are also useful to firmware size reduction.
66 /* disable debug print */
72 /* disable action features */
73 //#define NO_ACTION_LAYER
74 //#define NO_ACTION_TAPPING
75 //#define NO_ACTION_ONESHOT
76 //#define NO_ACTION_MACRO
77 //#define NO_ACTION_FUNCTION
79 // higher value means deeper actuation point, less sensitive
80 // be careful and only make small adjustments (steps of 1 or 2).
81 // too high and keys will fail to actuate. too low and keys will actuate spontaneously.
82 // test all keys before further adjustment.
83 // this should probably stay in the range +/-5.
84 // #define ACTUATION_DEPTH_ADJUSTMENT 0