2 Copyright 2017 Balz Guenat
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include "config_common.h"
23 /* USB Device descriptor parameter */
24 #define VENDOR_ID 0xFEED
25 #define PRODUCT_ID 0x660C
26 #define DEVICE_VER 0x0100
27 #define MANUFACTURER QMK
28 #define PRODUCT Leopold FC660C with QMK
29 #define DESCRIPTION Leopold FC660C with Hasu alternative controller using QMK
33 #define MATRIX_COLS 16
35 #define DIODE_DIRECTION CUSTOM_MATRIX
37 /* define if matrix has ghost */
38 //#define MATRIX_HAS_GHOST
40 /* number of backlight levels */
41 // #define BACKLIGHT_LEVELS 1
43 /* mapping backlight LEDs to correct Pin */
44 // #define BACKLIGHT_PIN B7
46 /* Set 0 if debouncing isn't needed */
47 #define DEBOUNCING_DELAY 0
48 #define TAPPING_TERM 175
50 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
51 // #define LOCKING_SUPPORT_ENABLE
52 /* Locking resynchronize hack */
53 // #define LOCKING_RESYNC_ENABLE
55 /* key combination for command */
56 #define IS_COMMAND() ( \
57 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
63 * Feature disable options
64 * These options are also useful to firmware size reduction.
69 /* disable debug print */
75 /* disable action features */
76 //#define NO_ACTION_LAYER
77 //#define NO_ACTION_TAPPING
78 //#define NO_ACTION_ONESHOT
79 //#define NO_ACTION_MACRO
80 //#define NO_ACTION_FUNCTION
82 // higher value means deeper actuation point, less sensitive
83 // be careful and only make small adjustments (steps of 1 or 2).
84 // too high and keys will fail to actuate. too low and keys will actuate spontaneously.
85 // test all keys before further adjustment.
86 // this should probably stay in the range +/-5.
87 // #define ACTUATION_DEPTH_ADJUSTMENT 0