1 SRC += matrix.c serial.c split_util.c
8 # This will define a symbol, F_CPU, in all source code files equal to the
9 # processor frequency in Hz. You can then use this symbol in your source code to
10 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
11 # automatically to create a 32-bit value in your source code.
13 # This will be an integer division of F_USB below, as it is sourced by
14 # F_USB after it has run through any CPU prescalers. Note that this value
15 # does not *change* the processor frequency - it should merely be updated to
16 # reflect the processor speed set externally so that the code can use accurate
23 # Target architecture (see library "Board Types" documentation).
26 # Input clock frequency.
27 # This will define a symbol, F_USB, in all source code files equal to the
28 # input clock frequency (before any prescaling is performed) in Hz. This value may
29 # differ from F_CPU if prescaling is used on the latter, and is required as the
30 # raw input clock is fed directly to the PLL sections of the AVR for high speed
31 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
32 # at the end, this will be done automatically to create a 32-bit value in your
35 # If no clock division is performed on the input clock inside the AVR (via the
36 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
40 # This definition is optional, and if your keyboard supports multiple bootloaders of
41 # different sizes, comment this out, and the correct address will be loaded
42 # automatically (+60). See bootloader.mk for all options.
45 # Interrupt driven control endpoint task(+60)
46 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
49 # change to "no" to disable the options, or define them in the Makefile in
50 # the appropriate keymap folder that will get included automatically
52 BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
53 MOUSEKEY_ENABLE = no # Mouse keys(+4700)
54 EXTRAKEY_ENABLE = no # Audio control and System control(+450)
55 CONSOLE_ENABLE = no # Console for debug(+400)
56 COMMAND_ENABLE = no # Commands for debug and configuration
57 NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
58 BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
59 MIDI_ENABLE = no # MIDI controls
60 AUDIO_ENABLE = no # Audio output on port C6
61 UNICODE_ENABLE = no # Unicode
62 BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
63 RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
65 USE_I2C = no # i2c is not supported
66 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
67 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
71 DEFAULT_FOLDER = ergoinu
74 DISABLE_PROMICRO_LEDs = yes
76 ifneq ($(strip $(ERGOINU)),)
77 ifeq ($(findstring promicroled, $(ERGOINU)), promicroled)
78 DISABLE_PROMICRO_LEDs = no
82 ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes)
83 OPT_DEFS += -DDISABLE_PROMICRO_LEDs