1 # project specific files
4 # the next two should match the directories in
5 # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
10 # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
12 MCU_LDSCRIPT = STM32F303xC
15 # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
16 MCU_STARTUP = stm32f3xx
18 # Board: it should exist either in <chibios>/os/hal/boards/
19 # or <this_dir>/boards
20 BOARD = GENERIC_STM32_F303XC
25 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
30 # Vector table for application
31 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
32 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
33 # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
36 # Do not put the microcontroller into power saving mode
37 # when we get USB suspend event. We want it to keep updating
39 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
41 # Options to pass to dfu-util when flashing
42 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
45 # comment out to disable the options.
48 BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
49 MOUSEKEY_ENABLE = yes # Mouse keys
50 EXTRAKEY_ENABLE = yes # Audio control and System control
51 CONSOLE_ENABLE = no # Console for debug
52 COMMAND_ENABLE = no # Commands for debug and configuration
53 #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
54 NKRO_ENABLE = no # USB Nkey Rollover
56 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
57 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in66666666666666666666666666