1 # project specific files
6 # - the next two should match the directories in
7 # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
11 # Linker script to use
12 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
14 MCU_LDSCRIPT = STM32F303xC
17 # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
18 MCU_STARTUP = stm32f3xx
20 # Board: it should exist either in <chibios>/os/hal/boards/
21 # or <this_dir>/boards
22 BOARD = GENERIC_STM32_F303XC
27 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
32 # Vector table for application
33 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
34 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
35 # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
38 # Options to pass to dfu-util when flashing
39 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
42 LED_MATRIX_ENABLE = IS31FL3731
45 # comment out to disable the options.
47 BACKLIGHT_ENABLE = yes
48 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
49 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
50 MOUSEKEY_ENABLE = yes # Mouse keys
51 EXTRAKEY_ENABLE = yes # Audio control and System control
52 CONSOLE_ENABLE = yes # Console for debug
53 COMMAND_ENABLE = yes # Commands for debug and configuration
54 #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
55 NKRO_ENABLE = yes # USB Nkey Rollover
56 #CUSTOM_MATRIX = yes # Custom matrix file
58 # SERIAL_LINK_ENABLE = yes