1 # project specific files
4 # the next two should match the directories in
5 # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
9 # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
11 MCU_LDSCRIPT = STM32F072xB
13 # is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
14 MCU_STARTUP = stm32f0xx
15 # it should exist either in <chibios>/os/hal/boards/
16 # or <this_dir>/boards
17 BOARD = ST_STM32F072B_DISCOVERY
19 # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
21 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
23 # If you want to be able to jump to bootloader from firmware on STM32 MCUs,
24 # set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
25 # ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
26 # a custom board definition that you plan to reuse).
27 # If you're not setting it here, leave it commented out.
28 # It is chip dependent, the correct number can be looked up here (page 175):
29 # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
30 # This also requires a patch to chibios:
31 # <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
32 #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
35 # comment out to disable the options.
39 satisfaction_encoder.c \
42 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
43 MOUSEKEY_ENABLE = yes # Mouse keys
44 EXTRAKEY_ENABLE = yes # Audio control and System control
45 CONSOLE_ENABLE = yes # Console for debug
46 COMMAND_ENABLE = yes # Commands for debug and configuration
47 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
48 NKRO_ENABLE = yes # USB Nkey Rollover
49 CUSTOM_MATRIX = no # Custom matrix file
51 QWIIC_ENABLE += MICRO_OLED
52 #BACKLIGHT_ENABLE = yes
55 # DYNAMIC_KEYMAP_ENABLE = yes
57 DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1