keyboards/bfake/readme.md

   1 B.fake
   2 ========
   3
   4 A 60% keyboard with RGB. The B.fake pcb is a copy of the B.face PCB sold by [winkeyless](https://winkeyless.kr/). However, the switch matrix is actually the same as the [FaceW](https://github.com/qmk/qmk_firmware/tree/master/keyboards/facew), a ps2avr PCB sold on [mechanicalkeyboards.com](https://mechanicalkeyboards.com/).
   5
   6 Keyboard Maintainer: QMK Community
   7 Hardware Supported: B.fake PCB
   8 Hardware Availability: https://www.aliexpress.com/store/product/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/2230037_32731084597.html
   9
  10 Make example for this keyboard (after setting up your build environment):
  11
  12     make bfake:default
  13
  14 Flashing
  15
  16 ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
  17
  18 Windows:
  19 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
  20 2. Place your keyboard into reset.
  21 3. Press the `Find Device` button and ensure that your keyboard is found.
  22 4. Press the `Open .hex File` button and locate the `.hex` file you created.
  23 5. Press the `Flash Device` button and wait for the process to complete.
  24
  25 macOS:
  26 1. Install homebrew by typing the following:
  27     ```
  28     /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
  29     ```
  30 2. Install `crosspack-avr`.
  31     ```
  32     brew cask install crosspack-avr
  33     ```
  34 3. Install the following packages:
  35     ```
  36     brew install python
  37     brew install pyusb
  38     brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
  39
  40 4. Place your keyboard into reset.
  41 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
  42
  43
  44 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.