3 ![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
5 An ergonomic 60% keyboard.
7 Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)
8 Hardware Supported: TGR Alice
9 Hardware Availability: Group buy finished
11 Make example for this keyboard (after setting up your build environment):
15 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
18 ps2avrGB keyboard firmware
19 ==========================
21 This keyboard uses the port of the QMK firmware for boards that are based on the
24 Note that this is a complete replacement for the firmware, so you won't be
25 using Bootmapper Client to change any keyboard settings, since not all the
26 USB report options are supported.
30 First, install the requirements. These commands are for OSX, but all you
31 need is the AVR toolchain and `bootloadHID` for flashing:
34 $ brew cask install crosspack-avr
35 $ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
39 Then, with the keyboard plugged in, simply run this command from the
40 `qmk_firmware` directory:
44 $ bootloadHID -r alice_default.hex
47 ## Setting the board to bootloader mode
49 Hold the ESC key (the one before the 1! key, in case you remaped it).
53 From my experience, it's really hard to brick these boards. But these
54 tricks have been useful when it got stuck in a weird scenario.
56 1. Try plugging the board in while holding the bootloader key. This will force
57 it to boot only the bootloader without loading the firmware. Once this is
58 done, just reflash the board with the original firmware.
59 2. Sometimes USB hubs can act weird, so try connecting the board directly
60 to your computer or plugging/unplugging the USB hub.