1 #----------------------------------------------------------------------------
4 # make all = Make software.
6 # make clean = Clean out built project files.
8 # make coff = Convert ELF to AVR COFF.
10 # make extcoff = Convert ELF to AVR Extended COFF.
12 # make program = Download the hex file to the device.
13 # Please customize your programmer settings(PROGRAM_CMD)
15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
16 # (must have teensy_loader_cli installed).
18 # make dfu = Download the hex file to the device, using dfu-programmer (must
19 # have dfu-programmer installed).
21 # make flip = Download the hex file to the device, using Atmel FLIP (must
22 # have Atmel FLIP installed).
24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
25 # (must have dfu-programmer installed).
27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
28 # (must have Atmel FLIP installed).
30 # make debug = Start either simulavr or avarice as specified for debugging,
31 # with avr-gdb or avr-insight as the front end for debugging.
33 # make filename.s = Just compile filename.c into the assembler code only.
35 # make filename.i = Create a preprocessed source file for use in submitting
36 # bug reports to the GCC project.
38 # To rebuild project do "make clean" then "make all".
39 #----------------------------------------------------------------------------
42 # change to "no" to disable the options, or define them in the makefile.mk in
43 # the appropriate keymap folder that will get included automatically
45 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
46 MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
47 EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
48 CONSOLE_ENABLE = yes # Console for debug(+400)
49 COMMAND_ENABLE = yes # Commands for debug and configuration
50 NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here:
51 # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
52 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
53 MIDI_ENABLE = no # MIDI controls
54 AUDIO_ENABLE = no # Audio output on port C6
55 UNICODE_ENABLE = no # Unicode
56 BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
57 RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
59 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
60 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
62 # Target file name (without extension).
66 # Directory common source filess exist
68 TMK_DIR = ../../tmk_core
70 # Directory keyboard dependent files exist
73 # # project specific files
81 ifneq ("$(wildcard keymaps/$(KEYMAP).c)","")
82 KEYMAP_FILE = keymaps/$(KEYMAP).c
84 ifneq ("$(wildcard keymaps/$(KEYMAP)/keymap.c)","")
85 KEYMAP_FILE = keymaps/$(KEYMAP)/keymap.c
86 ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
87 include keymaps/$(KEYMAP)/makefile.mk
90 $(error Keymap file does not exist)
96 ifneq ("$(wildcard keymaps/default.c)","")
97 KEYMAP_FILE = keymaps/default.c
99 KEYMAP_FILE = keymaps/default/keymap.c
102 ifneq ("$(wildcard keymaps/default/makefile.mk)","")
103 include keymaps/default/makefile.mk
108 SRC := $(KEYMAP_FILE) $(SRC)
116 # Processor frequency.
117 # This will define a symbol, F_CPU, in all source code files equal to the
118 # processor frequency in Hz. You can then use this symbol in your source code to
119 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
120 # automatically to create a 32-bit value in your source code.
122 # This will be an integer division of F_USB below, as it is sourced by
123 # F_USB after it has run through any CPU prescalers. Note that this value
124 # does not *change* the processor frequency - it should merely be updated to
125 # reflect the processor speed set externally so that the code can use accurate
133 # Target architecture (see library "Board Types" documentation).
136 # Input clock frequency.
137 # This will define a symbol, F_USB, in all source code files equal to the
138 # input clock frequency (before any prescaling is performed) in Hz. This value may
139 # differ from F_CPU if prescaling is used on the latter, and is required as the
140 # raw input clock is fed directly to the PLL sections of the AVR for high speed
141 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
142 # at the end, this will be done automatically to create a 32-bit value in your
145 # If no clock division is performed on the input clock inside the AVR (via the
146 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
149 # Interrupt driven control endpoint task(+60)
150 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
153 # Boot Section Size in *bytes*
155 # Teensy++ halfKay 1024
156 # Atmel DFU loader 4096
157 # LUFA bootloader 4096
159 OPT_DEFS += -DBOOTLOADER_SIZE=4096
162 ifeq ($(BACKLIGHT_ENABLE), yes)
167 # Optimize size but this may cause error "relocation truncated to fit"
168 #EXTRALDFLAGS = -Wl,--relax
171 VPATH += $(TARGET_DIR)
175 include $(TOP_DIR)/quantum/quantum.mk