build_keyboard.mk

   1 # Determine what keyboard we are building and setup the build environment.
   2 #
   3 # We support folders up to 5 levels deep below `keyboards/`. This file is
   4 # responsible for determining which folder is being used and doing the
   5 # corresponding environment setup.
   6
   7 ifndef VERBOSE
   8 .SILENT:
   9 endif
  10
  11 .DEFAULT_GOAL := all
  12
  13 include common.mk
  14
  15 # Set the filename for the final firmware binary
  16 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
  17 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
  18 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
  19 STM32_PATH := quantum/stm32
  20
  21 # Force expansion
  22 TARGET := $(TARGET)
  23
  24 # For split boards we need to set a master half.
  25 MASTER ?= left
  26 ifdef master
  27     MASTER = $(master)
  28 endif
  29
  30 ifeq ($(MASTER),right)
  31     OPT_DEFS += -DMASTER_IS_ON_RIGHT
  32 else
  33     ifneq ($(MASTER),left)
  34 $(error MASTER does not have a valid value(left/right))
  35     endif
  36 endif
  37
  38 ifdef SKIP_VERSION
  39     OPT_DEFS += -DSKIP_VERSION
  40 endif
  41
  42 # Determine which subfolders exist.
  43 KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
  44 KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
  45 KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
  46 KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
  47 KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
  48 KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
  49 KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
  50 KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
  51 KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
  52 KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
  53 KEYBOARD_PATHS :=
  54 KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
  55 KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
  56 KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
  57 KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
  58 KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
  59
  60 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
  61     KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
  62 endif
  63 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
  64     KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
  65 endif
  66 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
  67     KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
  68 endif
  69 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
  70     KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
  71 endif
  72 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
  73     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
  74 endif
  75
  76
  77 # Pull in rules.mk files from all our subfolders
  78 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
  79     include $(KEYBOARD_PATH_5)/rules.mk
  80 endif
  81 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
  82     include $(KEYBOARD_PATH_4)/rules.mk
  83 endif
  84 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
  85     include $(KEYBOARD_PATH_3)/rules.mk
  86 endif
  87 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
  88     include $(KEYBOARD_PATH_2)/rules.mk
  89 endif
  90 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
  91     include $(KEYBOARD_PATH_1)/rules.mk
  92 endif
  93
  94
  95 MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
  96 MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
  97 MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
  98 MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
  99 MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
 100
 101 # Check for keymap.json first, so we can regenerate keymap.c
 102 include build_json.mk
 103
 104 ifeq ("$(wildcard $(KEYMAP_PATH))", "")
 105     # Look through the possible keymap folders until we find a matching keymap.c
 106     ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
 107         -include $(MAIN_KEYMAP_PATH_5)/rules.mk
 108         KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
 109         KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
 110     else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
 111         -include $(MAIN_KEYMAP_PATH_4)/rules.mk
 112         KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
 113         KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
 114     else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
 115         -include $(MAIN_KEYMAP_PATH_3)/rules.mk
 116         KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
 117         KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
 118     else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
 119         -include $(MAIN_KEYMAP_PATH_2)/rules.mk
 120         KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
 121         KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
 122     else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
 123         -include $(MAIN_KEYMAP_PATH_1)/rules.mk
 124         KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
 125         KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
 126     else ifneq ($(LAYOUTS),)
 127         # If we haven't found a keymap yet fall back to community layouts
 128         include build_layout.mk
 129     else
 130         $(error Could not find keymap)
 131         # this state should never be reached
 132     endif
 133 endif
 134
 135 ifeq ($(strip $(CTPC)), yes)
 136   CONVERT_TO_PROTON_C=yes
 137 endif
 138
 139 ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
 140     TARGET := $(TARGET)_proton_c
 141     include $(STM32_PATH)/proton_c.mk
 142     OPT_DEFS += -DCONVERT_TO_PROTON_C
 143 endif
 144
 145 ifneq ($(FORCE_LAYOUT),)
 146     TARGET := $(TARGET)_$(FORCE_LAYOUT)
 147 endif
 148
 149 include quantum/mcu_selection.mk
 150
 151 ifdef MCU_FAMILY
 152     OPT_DEFS += -DQMK_STM32
 153     KEYBOARD_PATHS += $(STM32_PATH)
 154 endif
 155
 156
 157 # Find all the C source files to be compiled in subfolders.
 158 KEYBOARD_SRC :=
 159
 160 KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
 161 KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c
 162 KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c
 163 KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c
 164 KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c
 165
 166 ifneq ("$(wildcard $(KEYBOARD_C_5))","")
 167     KEYBOARD_SRC += $(KEYBOARD_C_5)
 168 endif
 169 ifneq ("$(wildcard $(KEYBOARD_C_4))","")
 170     KEYBOARD_SRC += $(KEYBOARD_C_4)
 171 endif
 172 ifneq ("$(wildcard $(KEYBOARD_C_3))","")
 173     KEYBOARD_SRC += $(KEYBOARD_C_3)
 174 endif
 175 ifneq ("$(wildcard $(KEYBOARD_C_2))","")
 176     KEYBOARD_SRC += $(KEYBOARD_C_2)
 177 endif
 178 ifneq ("$(wildcard $(KEYBOARD_C_1))","")
 179     KEYBOARD_SRC += $(KEYBOARD_C_1)
 180 endif
 181
 182 # Generate KEYBOARD_name_subname for all levels of the keyboard folder
 183 KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
 184 KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
 185 KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
 186 KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
 187 KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
 188
 189 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
 190     OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
 191 endif
 192 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
 193     OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
 194 endif
 195 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
 196     OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
 197 endif
 198 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
 199     OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
 200 endif
 201 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
 202     OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
 203 endif
 204
 205 # Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
 206 # that the same keymap may be used on multiple keyboards.
 207 #
 208 # We grab the most top-level include file that we can. That file should
 209 # use #ifdef statements to include all the neccesary subfolder includes,
 210 # as described here:
 211 #
 212 #    https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
 213 #
 214 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
 215     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
 216 endif
 217 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","")
 218     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
 219 endif
 220 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","")
 221     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
 222 endif
 223 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","")
 224     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
 225 endif
 226 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
 227     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
 228 endif
 229
 230 # Determine and set parameters based on the keyboard's processor family.
 231 # We can assume a ChibiOS target When MCU_FAMILY is defined since it's
 232 # not used for LUFA
 233 ifdef MCU_FAMILY
 234     FIRMWARE_FORMAT?=bin
 235     PLATFORM=CHIBIOS
 236 else ifdef ARM_ATSAM
 237     PLATFORM=ARM_ATSAM
 238     FIRMWARE_FORMAT=bin
 239 else
 240     PLATFORM=AVR
 241     FIRMWARE_FORMAT?=hex
 242 endif
 243
 244 ifeq ($(PLATFORM),CHIBIOS)
 245     include $(TMK_PATH)/chibios.mk
 246     OPT_OS = chibios
 247     ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
 248         OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h
 249      else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","")
 250         OPT_DEFS += -include $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h
 251     else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/bootloader_defs.h)","")
 252         OPT_DEFS += -include $(KEYBOARD_PATH_4)/bootloader_defs.h
 253      else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h)","")
 254         OPT_DEFS += -include $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h
 255     else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/bootloader_defs.h)","")
 256         OPT_DEFS += -include $(KEYBOARD_PATH_3)/bootloader_defs.h
 257      else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h)","")
 258         OPT_DEFS += -include $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h
 259     else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/bootloader_defs.h)","")
 260         OPT_DEFS += -include $(KEYBOARD_PATH_2)/bootloader_defs.h
 261      else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h)","")
 262         OPT_DEFS += -include $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h
 263     else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")
 264         OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
 265      else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
 266         OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
 267     else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
 268         OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
 269     endif
 270 endif
 271
 272 # Find all of the config.h files and add them to our CONFIG_H define.
 273 CONFIG_H :=
 274 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
 275     CONFIG_H += $(KEYBOARD_PATH_5)/config.h
 276 endif
 277 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","")
 278     CONFIG_H += $(KEYBOARD_PATH_4)/config.h
 279 endif
 280 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","")
 281     CONFIG_H += $(KEYBOARD_PATH_3)/config.h
 282 endif
 283 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","")
 284     CONFIG_H += $(KEYBOARD_PATH_2)/config.h
 285 endif
 286 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","")
 287     CONFIG_H += $(KEYBOARD_PATH_1)/config.h
 288 endif
 289
 290 POST_CONFIG_H :=
 291 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","")
 292     POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h
 293 endif
 294 ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","")
 295     POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h
 296 endif
 297 ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","")
 298     POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h
 299 endif
 300 ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","")
 301     POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h
 302 endif
 303 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
 304     POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
 305 endif
 306
 307 # Save the defines and includes here, so we don't include any keymap specific ones
 308 PROJECT_DEFS := $(OPT_DEFS)
 309 PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 310 PROJECT_CONFIG := $(CONFIG_H)
 311
 312 # Userspace setup and definitions
 313 ifeq ("$(USER_NAME)","")
 314     USER_NAME := $(KEYMAP)
 315 endif
 316 USER_PATH := users/$(USER_NAME)
 317
 318 -include $(USER_PATH)/rules.mk
 319 ifneq ("$(wildcard $(USER_PATH)/config.h)","")
 320     CONFIG_H += $(USER_PATH)/config.h
 321 endif
 322
 323 # Object files directory
 324 #     To put object files in current directory, use a dot (.), do NOT make
 325 #     this an empty or blank macro!
 326 KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
 327
 328 ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
 329     CONFIG_H += $(KEYMAP_PATH)/config.h
 330 endif
 331
 332 # project specific files
 333 SRC += $(KEYBOARD_SRC) \
 334     $(KEYMAP_C) \
 335     $(QUANTUM_SRC)
 336
 337 # Optimize size but this may cause error "relocation truncated to fit"
 338 #EXTRALDFLAGS = -Wl,--relax
 339
 340 # Search Path
 341 VPATH += $(KEYMAP_PATH)
 342 VPATH += $(USER_PATH)
 343 VPATH += $(KEYBOARD_PATHS)
 344 VPATH += $(COMMON_VPATH)
 345
 346 include common_features.mk
 347 include $(TMK_PATH)/protocol.mk
 348 include $(TMK_PATH)/common.mk
 349 include bootloader.mk
 350
 351 SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 352 SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
 353 SRC += $(TMK_COMMON_SRC)
 354 OPT_DEFS += $(TMK_COMMON_DEFS)
 355 EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
 356
 357 ifeq ($(PLATFORM),AVR)
 358 ifeq ($(strip $(PROTOCOL)), VUSB)
 359     include $(TMK_PATH)/protocol/vusb.mk
 360 else
 361     include $(TMK_PATH)/protocol/lufa.mk
 362 endif
 363     include $(TMK_PATH)/avr.mk
 364 endif
 365
 366 ifeq ($(PLATFORM),ARM_ATSAM)
 367     include $(TMK_PATH)/arm_atsam.mk
 368     include $(TMK_PATH)/protocol/arm_atsam.mk
 369 endif
 370
 371 ifeq ($(PLATFORM),CHIBIOS)
 372     include $(TMK_PATH)/protocol/chibios.mk
 373 endif
 374
 375 ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
 376     VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
 377     VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
 378     include $(VISUALIZER_PATH)/visualizer.mk
 379 endif
 380
 381 CONFIG_H += $(POST_CONFIG_H)
 382 ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
 383
 384 OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
 385 $(KEYMAP_OUTPUT)_SRC := $(SRC)
 386 $(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
 387 -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \
 388 -DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
 389 -DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H
 390 $(KEYMAP_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS)
 391 $(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
 392 $(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)
 393 $(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS)
 394 $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
 395 $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 396
 397 # Default target.
 398 all: build check-size
 399 build: elf cpfirmware
 400 check-size: build
 401 objs-size: build
 402
 403 include show_options.mk
 404 include $(TMK_PATH)/rules.mk